Hi all,
I have mix stable+testing (~1200 packages from stable, ~20 packages
from testing). I have the following contents in
/etc/apt/preferences.d/pinning:
Package: *
Pin: release a=stable
Pin-Priority: 1001
Package: *
Pin: release a=testing
Pin-Priority: 200
Package: *
Pin: release a=e
On 01.03.2019 13:27, Felix Rubio wrote:
> Hi all,
>
> I have mix stable+testing (~1200 packages from stable, ~20
> packages from testing). I have the following contents in
> /etc/apt/preferences.d/pinning:
>
This is something you should not do in first place. [1]
The right and safe way to run s
On 2019-02-28 18:59, mick crane wrote:
hello
is buster
I can print from command line with
"lp filename"
but not with "lpr filename"
when printing from terminal the font is a bit big and uses too much
paper.
apparently "enscript -FCourier10 filename" for example is supposed to
work but that send
Il giorno ven 1 mar 2019 alle ore 10:46 Alexander V. Makartsev <
avbe...@gmail.com> ha scritto:
> On 01.03.2019 13:27, Felix Rubio wrote:
>
> I have mix stable+testing (~1200 packages from stable, ~20 packages
> from testing). I have the following contents in
> /etc/apt/preferences.d/pinning:
On 3/1/2019 11:07 AM, Andrea Borgia wrote:
> Il giorno ven 1 mar 2019 alle ore 10:46 Alexander V. Makartsev <
> avbe...@gmail.com> ha scritto:
>
>> On 01.03.2019 13:27, Felix Rubio wrote:
>>
>> I have mix stable+testing (~1200 packages from stable, ~20 packages
>> from testing). I have the foll
On 01.03.2019 15:07, Andrea Borgia wrote:
>
> Il giorno ven 1 mar 2019 alle ore 10:46 Alexander V. Makartsev
> mailto:avbe...@gmail.com>> ha scritto:
>
> On 01.03.2019 13:27, Felix Rubio wrote:
>> I have mix stable+testing (~1200 packages from stable, ~20
>> packages from testing).
$ enscript -d filename
lpr: test: unknown printer
sorry that is a typing error, the actual file was called "test".
tried the printer name after "-d" but put this here because shows
enscript is using lpr
--
Key ID4BFEBB31
mick crane (12019-02-28):
> Can try to get lpr to work
Leaving something that does not work is rarely a good idea.
You neglected to give some very important information, in particular
which packages provides the various commands you are trying to use and
their respective versions.
Regards,
--
On 2019-03-01, mick crane wrote:
> On 2019-02-28 18:59, mick crane wrote:
>> hello
>> is buster
>> I can print from command line with
>> "lp filename"
>> but not with "lpr filename"
>> when printing from terminal the font is a bit big and uses too much
>> paper.
>> apparently "enscript -FCourier1
On 2019-03-01 11:15, Curt wrote:
I believe the lpr that works with cups is the one provided by cups-bsd.
success !
ta ever so much
--
Key ID4BFEBB31
On Fri 01 Mar 2019 at 11:35:18 +, mick crane wrote:
> On 2019-03-01 11:15, Curt wrote:
>
> > I believe the lpr that works with cups is the one provided by cups-bsd.
> >
> success !
> ta ever so much
If installing the cups-bsd package was the solution, why didn't the use
of lpr give a file n
Brian (12019-03-01):
> If installing the cups-bsd package was the solution, why didn't the use
> of lpr give a file not found error?
Probably because of this, that caused the removal of packages:
Conflicts: lpr, lprng
Regards,
--
Nicolas George
signature.asc
Description: PGP signature
On Fri 01 Mar 2019 at 09:58:08 +, mick crane wrote:
> On 2019-02-28 18:59, mick crane wrote:
> > hello
> > is buster
> > I can print from command line with
> > "lp filename"
> > but not with "lpr filename"
> > when printing from terminal the font is a bit big and uses too much
> > paper.
> > a
On Fri 01 Mar 2019 at 12:43:58 +0100, Nicolas George wrote:
> Brian (12019-03-01):
> > If installing the cups-bsd package was the solution, why didn't the use
> > of lpr give a file not found error?
>
> Probably because of this, that caused the removal of packages:
>
> Conflicts: lpr, lprng
I d
On 2019-03-01 11:42, Brian wrote:
On Fri 01 Mar 2019 at 11:35:18 +, mick crane wrote:
On 2019-03-01 11:15, Curt wrote:
> I believe the lpr that works with cups is the one provided by cups-bsd.
>
success !
ta ever so much
If installing the cups-bsd package was the solution, why didn't the
Brian (12019-03-01):
> I doubt it. This simply says that cups cannot exist on the same system
> if either the lpr or lprng *packages* is installed.
And therefore, if one of these packages was previously installed, as
mick just told us, and provided the lpr command, it was removed to make
way for t
On Fri 01 Mar 2019 at 11:55:20 +, Brian wrote:
> On Fri 01 Mar 2019 at 12:43:58 +0100, Nicolas George wrote:
>
> > Brian (12019-03-01):
> > > If installing the cups-bsd package was the solution, why didn't the use
> > > of lpr give a file not found error?
> >
> > Probably because of this, th
On 2019-03-01 11:49, Brian wrote:
on client PC
$ lpstat -t
scheduler is running
system default destination: HP_LaserJet_4000_Series
device for HP_LaserJet_4000_Series: socket://10.0.0.108
This is not a connection to the server. socket://... indicates a direct
connection to the printer.
with
On Fri 01 Mar 2019 at 12:09:16 +, mick crane wrote:
> On 2019-03-01 11:49, Brian wrote:
>
> > > "systemctl start lpd.service"
> >
> > Eh? You would have to explain. For a start, the service file does not
> > seem to exist in Debian.
>
> clutching at straws
Which package is lpd.service in?
On Fri 01 Mar 2019 at 12:09:16 +, mick crane wrote:
> On 2019-03-01 11:49, Brian wrote:
>
> > > on client PC
> > > $ lpstat -t
> > > scheduler is running
> > > system default destination: HP_LaserJet_4000_Series
> > > device for HP_LaserJet_4000_Series: socket://10.0.0.108
> >
> > This is no
On Fri 01 Mar 2019 at 12:21:05 +, Brian wrote:
> On Fri 01 Mar 2019 at 12:09:16 +, mick crane wrote:
>
> > On 2019-03-01 11:49, Brian wrote:
> >
> > > > on client PC
> > > > $ lpstat -t
> > > > scheduler is running
> > > > system default destination: HP_LaserJet_4000_Series
> > > > devic
On 2019-03-01 12:16, Brian wrote:
On Fri 01 Mar 2019 at 12:09:16 +, mick crane wrote:
On 2019-03-01 11:49, Brian wrote:
> > "systemctl start lpd.service"
>
> Eh? You would have to explain. For a start, the service file does not
> seem to exist in Debian.
clutching at straws
Which packag
On 2019-03-01 12:24, Brian wrote:
On Fri 01 Mar 2019 at 12:21:05 +, Brian wrote:
On Fri 01 Mar 2019 at 12:09:16 +, mick crane wrote:
> On 2019-03-01 11:49, Brian wrote:
>
> > > on client PC
> > > $ lpstat -t
> > > scheduler is running
> > > system default destination: HP_LaserJet_4000_
On Fri 01 Mar 2019 at 12:26:23 +, mick crane wrote:
> On 2019-03-01 12:16, Brian wrote:
> > On Fri 01 Mar 2019 at 12:09:16 +, mick crane wrote:
> >
> > > On 2019-03-01 11:49, Brian wrote:
> > >
> > > > > "systemctl start lpd.service"
> > > >
> > > > Eh? You would have to explain. For a s
On Fri 01 Mar 2019 at 12:34:45 +, mick crane wrote:
> On 2019-03-01 12:24, Brian wrote:
> > On Fri 01 Mar 2019 at 12:21:05 +, Brian wrote:
> >
> > > On Fri 01 Mar 2019 at 12:09:16 +, mick crane wrote:
> > >
> > > > On 2019-03-01 11:49, Brian wrote:
> > > >
> > > > > > on client PC
>
Hello، I am Aymen from Algeria and I would like to create a my new
operating system and I want to build it using Debian How to get a version
of debian adjustable and thanks.
On 01/03/2019 13:29, Ultra Foundation wrote:
> Hello، I am Aymen from Algeria and I would like to create a my new
> operating system and I want to build it using Debian How to get a version
> of debian adjustable and thanks.
As far as I under stand things, if you install the net-install version,
Ultra Foundation wrote:
> Hello، I am Aymen from Algeria and I would like to create a my new
> operating system and I want to build it using Debian How to get a version
> of debian adjustable and thanks.
https://www.debian.org/releases/stable/installmanual
Instructions are available in French,
On Fri, Mar 01, 2019 at 07:30:15AM +, Dekks Herton wrote:
David Wright writes:
I always add an explicit rw or ro under options, along with defaults.
With systemd, I add nofail to any filesystems that aren't vital for
the system to run, which means the system will still boot fully
without th
On 2019-03-01, Dan Ritter wrote:
> Ultra Foundation wrote:
>> Hello، I am Aymen from Algeria and I would like to create a my new
>> operating system and I want to build it using Debian How to get a version
>> of debian adjustable and thanks.
>
>
> https://www.debian.org/releases/stable/installman
Curt wrote:
> On 2019-03-01, Dan Ritter wrote:
> > Ultra Foundation wrote:
> >> Hello، I am Aymen from Algeria and I would like to create a my new
> >> operating system and I want to build it using Debian How to get a version
> >> of debian adjustable and thanks.
> >
> >
> > https://www.debian.o
Felix Rubio wrote:
> Hi all,
>
> I have mix stable+testing (~1200 packages from stable, ~20 packages from
> testing). I have the following contents in /etc/apt/preferences.d/pinning:
>
> Package: *
> Pin: release a=stable
> Pin-Priority: 1001
>
> Package: *
> Pin: release a=testing
> Pin-Pr
Hi all!
I don't know if this is the wright place to ask, but I'm searching a lot
trying to find a way to this problem.
I'm installing Debian in my Asus ROG GL552VW laptop (Intel and Nvidia video
cards) and the resolution (probably 3840x2160)is set in a way that the
font size is so small that I ha
Hi,
Hope this email finds you well.
I just wanted to know if you’re looking to acquire BentleySystems Contact info
across the globe for your marketing efforts.
We also have technology Users Like: Adobe ,ANSYS ,autocad , SAP SE , IBM
,Aveva , Autodesk , blender, Blue beamSoftware ,C
On 2019-03-01, Fabiano Ferronato wrote:
>
> Hi all!
>
> I don't know if this is the wright place to ask, but I'm searching a lot
> trying to find a way to this problem.
> I'm installing Debian in my Asus ROG GL552VW laptop (Intel and Nvidia video
> cards) and the resolution (probably 3840x2160)is
On Fri 01 Mar 2019 at 01:30:47 (-0500), Cindy-Sue Causey wrote:
> On 2/28/19, Felix Miata wrote:
> > David Wright composed on 2019-02-28 20:26 (UTC-0600):
> >
> >> I always add an explicit rw or ro under options, along with defaults.
> >
> > English can be tricky. Please clarify. AIUI, the string
On Fri 01 Mar 2019 at 02:51:33 (-0500), Felix Miata wrote:
> Cindy-Sue Causey composed on 2019-03-01 01:30 (UTC-0500):
> > Felix Miata wrote:
> >> David Wright composed on 2019-02-28 20:26 (UTC-0600):
> >>> I always add an explicit rw or ro under options, along with defaults.
>
> >> English can be
On Fri, Mar 01, 2019 at 10:52:00AM -0600, David Wright wrote:
> On Fri 01 Mar 2019 at 01:30:47 (-0500), Cindy-Sue Causey wrote:
> > That's what I'd been thinking, too. Because of your question, I just
> > tried a search for...
> >
> > "defaults,rw" /etc/fstab
>
> You've really limited what can be
My system started using swap space even when there is available RAM:
$ free -m
totalusedfree shared buff/cache available
Mem: 388210042303 63 5732598
Swap: 956 239 717
Can anyone hel
On Fri, Mar 01, 2019 at 02:12:06PM -0300, Bruno Schneider wrote:
My system started using swap space even when there is available RAM:
$ free -m
totalusedfree shared buff/cache available
Mem: 388210042303 63 573
On Fri 01 Mar 2019 at 07:30:15 (+), Dekks Herton wrote:
> David Wright writes:
> > On Thu 28 Feb 2019 at 15:45:47 (-0500), Stephen P. Molnar wrote:
> >> # /etc/fstab: static file system information.
> >> #
> >> # Use 'blkid' to print the universally unique identifier for a
> >> # device; this
Bruno Schneider wrote:
> My system started using swap space even when there is available RAM:
>
> $ free -m
> totalusedfree shared buff/cache
> available
> Mem: 388210042303 63 573
> 2598
> Swap: 9
Hi.
On Fri, Mar 01, 2019 at 02:12:06PM -0300, Bruno Schneider wrote:
> My system started using swap space even when there is available RAM:
>
> $ free -m
> totalusedfree shared buff/cache
> available
> Mem: 388210042303
Fabiano Ferronato composed on 2019-03-01 16:20 (UTC+0100):
> I don't know if this is the wright place to ask, but I'm searching a lot
> trying to find a way to this problem.
> I'm installing Debian in my Asus ROG GL552VW laptop (Intel and Nvidia video
> cards) and the resolution (probably 3840x216
On Fri 01 Mar 2019 at 12:00:06 (-0500), Greg Wooledge wrote:
> On Fri, Mar 01, 2019 at 10:52:00AM -0600, David Wright wrote:
> > On Fri 01 Mar 2019 at 01:30:47 (-0500), Cindy-Sue Causey wrote:
> > > That's what I'd been thinking, too. Because of your question, I just
> > > tried a search for...
> >
On Fri, Mar 1, 2019 at 2:18 PM Reco wrote:
>
> Please post the contents of /proc/meminfo. And "sar -r ALL 1 10", for
> the sake of the completeness.
$ cat /proc/meminfo
MemTotal:3975380 kB
MemFree: 1886004 kB
MemAvailable:2307332 kB
Buffers: 49840 kB
Cached:
>>nofail is intended for removable drives that could be missing on boot,
>>such as Thinkpad ultrabay drives/CF or SD cards.
> It is also, as he said, useful if you don't want a failure of
> a non-essential disk to make the system drop to single user on boot.
Yup. `nofail` corresponds to the beha
Hi.
On Fri, Mar 01, 2019 at 02:39:22PM -0300, Bruno Schneider wrote:
> On Fri, Mar 1, 2019 at 2:18 PM Reco wrote:
> >
> > Please post the contents of /proc/meminfo. And "sar -r ALL 1 10", for
> > the sake of the completeness.
>
> $ cat /proc/meminfo
> MemTotal:3975380 kB
> MemFree
Hi.
On Fri, Mar 01, 2019 at 12:49:11PM -0500, Stefan Monnier wrote:
> >>nofail is intended for removable drives that could be missing on boot,
> >>such as Thinkpad ultrabay drives/CF or SD cards.
> > It is also, as he said, useful if you don't want a failure of
> > a non-essential disk to
Le 01/03/2019 à 18:30, Felix Miata a écrit :
Including either nomodeset or nouveau.modeset=0 for installation
is pointless, since the installer does not use KMS.
Another key is the i7-6700HQ provides HD 530 Intel video. Intel + NVidia
usually equates to
"Optimus"
which makes nouveau.modes
David Wright composed on 2019-03-01 10:56 (UTC-0600):
> (and you so much work).
Was wondering for years. I think I'm over it now. :)
--
Evolution as taught in public schools is religion, not science.
Team OS/2 ** Reg. Linux User #211409 ** a11y rocks!
Felix Miata *** http://fm.no-ip.com/
Le 01/03/2019 à 18:56, Reco a écrit :
First, there's huge amount of unused (not to be confused with "free")
memory on your host. And no, it's not a filesystem's cache (600M), it's
really "nothing there"-unused memory which amounts 1880M.
This is the amount reported in /proc/meminfo as MemFree
On Fri, Mar 01, 2019 at 07:34:50PM +0100, Pascal Hambourg wrote:
> Le 01/03/2019 à 18:56, Reco a écrit :
> >
> > First, there's huge amount of unused (not to be confused with "free")
> > memory on your host. And no, it's not a filesystem's cache (600M), it's
> > really "nothing there"-unused memor
Hi, I'm on debian-testing (updated).
As far as I understand I can't install lightdm unless I update systemd
which presents 2 errors. So, what should I do?
Here are the terminal outputs (system is in Spanish, these are
machine-translations):
$ sudo apt-get install lightdm
Reading list of packages
Il 01/03/19 11:18, Alexander V. Makartsev ha scritto:
This is something you have to decide for yourself and deal with
unforeseen consequences. If you actually *build* packages from
"stable" on "testing" system, using dependencies for building also
from "testing" then it should be ok compatibil
riveravaldez wrote:
> Hi, I'm on debian-testing (updated).
>
> As far as I understand I can't install lightdm unless I update systemd
> which presents 2 errors. So, what should I do?
That's what happens with testing.
> So, what should I do?
>
> Right now I can start Xorg (apparently) but can'
On 3/1/19 4:20 PM, Fabiano Ferronato wrote:
> I'm installing Debian in my Asus ROG GL552VW laptop (Intel and
> Nvidia video cards) and the resolution (probably 3840x2160)is
> set in a way that the font size is so small that I have to
> almost put my face on the monitor so I can read. And the
> wi
On divendres, 1 de març de 2019 10:45:48 CET Alexander V. Makartsev wrote:
> On 01.03.2019 13:27, Felix Rubio wrote:
> > Hi all,
> >
> > I have mix stable+testing (~1200 packages from stable, ~20
> > packages from testing). I have the following contents in
> > /etc/apt/preferences.d/pinning:
>
Hey,
My name is Nate Brady. Im with Purism. We are a social purpose corporation
offering "security by default" in our hardware products and software services.
We saw you were an exhibitor at SCALE 17x. We are also going to be an exhibitor
at SCALE 17x. I would love for us to be able to have a b
I'm trying to bind multimedia keys by their names:
$ grep mpc ~/.config/i3/config
bindsym XF86AudioPrev exec --no-startup-id mpc prev
bindsym XF86AudioNext exec --no-startup-id mpc next
Those bindings didn't work. `xev` didn't recognize "keypress" events
when I'm pressing Fn+F5-F7 and
>> Right now I can start Xorg (apparently) but can't start IceWM, so, I
>> only have CLI.
>
> Use 'startx' to start X.
>
> Write a .xinitrc like this:
>
> ---
> #!/bin/sh
> exec icewm
> ---
>
> Later, testing will be fixed and you can install lightdm again.
>
> -dsr-
>
Thanks a lot, Dan.
After in
riveravaldez wrote:
> >> Right now I can start Xorg (apparently) but can't start IceWM, so, I
> >> only have CLI.
> >
> > Use 'startx' to start X.
> >
> > Write a .xinitrc like this:
> >
> > ---
> > #!/bin/sh
> > exec icewm
> > ---
> >
> > Later, testing will be fixed and you can install lightdm a
On 3/1/19, Dan Ritter wrote:
> riveravaldez wrote:
>> >> Right now I can start Xorg (apparently) but can't start IceWM, so, I
>> >> only have CLI.
>> >
>> > Use 'startx' to start X.
>> >
>> > Write a .xinitrc like this:
>> >
>> > ---
>> > #!/bin/sh
>> > exec icewm
>> > ---
>> >
>> > Later, testing
Hi, I'm on debian-testing (updated), and found this issue:
$ systemctl reboot
Failed to set wall message, ignoring: The name
org.freedesktop.PolicyKit1 was not provided by any .service files
Failed to reboot system via logind: The name
org.freedesktop.PolicyKit1 was not provided by any .service fi
Le 01/03/2019 à 19:41, Reco a écrit :
On Fri, Mar 01, 2019 at 07:34:50PM +0100, Pascal Hambourg wrote:
Le 01/03/2019 à 18:56, Reco a écrit :
First, there's huge amount of unused (not to be confused with "free")
memory on your host. And no, it's not a filesystem's cache (600M), it's
really "not
Stefan K wrote:
> Hi John,
>
> yes there are synced, if I run 'ntpdate timeserv.domain.ag' they syncd
> everything fine, if I start ntp-server after 2-3Days I've an delay of few
> seconds. Maybe I schould ask on the ntp-mailing list?!
>
> best regards
> Stefan
I have a similar problem. In a clo
Il 01/03/19 22:40, riveravaldez ha scritto:
> Hi, I'm on debian-testing (updated), and found this issue:
>
> $ systemctl reboot
> Failed to set wall message, ignoring: The name
> org.freedesktop.PolicyKit1 was not provided by any .service files
> Failed to reboot system via logind: The name
> org.
riveravaldez wrote:
> Hi, I'm on debian-testing (updated), and found this issue:
>
> $ systemctl reboot
At this point it is advisable to read some linux basics ... I think there
are also videos in youtube - just like taking driving course or any kind of
course for operating a device. I mean you
On 3/1/19, deloptes wrote:
> riveravaldez wrote:
>
>> Hi, I'm on debian-testing (updated), and found this issue:
>>
>> $ systemctl reboot
>
> At this point it is advisable to read some linux basics ... I think there
> are also videos in youtube - just like taking driving course or any kind of
> co
On 3/1/19 5:53 PM, Gian Carlo wrote:
> Il 01/03/19 22:40, riveravaldez ha scritto:
>> Hi, I'm on debian-testing (updated), and found this issue:
>>
>> $ systemctl reboot
>> Failed to set wall message, ignoring: The name
>> org.freedesktop.PolicyKit1 was not provided by any .service files
>> Failed
riveravaldez [2019-03-01 23:09:12-03] wrote:
> I've been rebooting with 'systemctl reboot' as a normal user in
> debian-testing (and even other distros) for a couple of years now, and
> never had no problem.
"systemctl reboot" as a normal user should work if Policy kit and
Systemd components are
On 3/2/19, Teemu Likonen wrote:
> riveravaldez [2019-03-01 23:09:12-03] wrote:
>
>> I've been rebooting with 'systemctl reboot' as a normal user in
>> debian-testing (and even other distros) for a couple of years now, and
>> never had no problem.
>
> "systemctl reboot" as a normal user should work
Hello I’m new to Debian and wanted to know what are some good Debian specific
tools/apps I should know so I don’t write emails like this.
I know of
1. Dpkg
2. Apt-file
3. Apt
4. Aptitude
5. I know how to use backports for stable
Is there anything else I should know that can help me find answers
73 matches
Mail list logo
