Hi All,
I have 4 drives in a RAID-5 configuration.
One of the drives broke. I replaced said drive, did a
'raidhotadd /dev/md0 /dev/hdb2'. Watched it for a while and then went
home.
And then /dev/hde failed too. The syncing wasn't done:
Jan 25 19:17:23 clio kernel: hde: dma_intr: status=0x51 {
hi ya danie
if you replaced the prev bad disk with a new one..watched for a bit
and went home..
and than it was dead when yougot back ...
and now its complaining about another disk
and now, if you have a 4 drive raid5 setup, you probably s.o.l.
hope you have backup before the drive was going b
Hi!
On Sun, Jan 25, 2004 at 06:57:06PM +0200, Micha Feigin wrote:
I tried space quest 2 and monkey island 1 up to now.
For Monkey Island (and other Lucas Games adventures) I would try
scummvm. Then you can play those games directly under linux.
Shade and sweet water!
Stephan
--
| Stephan Seit
> "SY" == Steven Yap <[EMAIL PROTECTED]> writes:
SY> The newer Palm OS devices uses /dev/ttyUSB1 for HotSync. Try
SY> that.
Hmm.
Configured kpilot to look directly at /dev/ttyUSB1
09:45:43 Pilot device /dev/ttyUSB1 doesn't exist. Assuming the device uses DevFS.
09:45:44 Trying to
Buenas!
What I used to do while running "stable" plus some packages from
"testing" was this:
1. I installed and _use_ aptitude as frontend. This makes it
simpler to follow dependencies.
2. In aptitude, I select Options > Dependency Handling and change
"Install suggested/recommended packa
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
I faced a problem when I tried to do:
apt-file search kernel-package
Can't locate object method "host" via package "URI::_foreign" (perhaps you
forgot to load "URI::_foreign"?) at /usr/bin/apt-file line 225.
I did not mess with my Perl inst
Hello,
I installed debian trough the network with a kernel 2.4.18 (bf2.4). Then I
installed X windows and xawtv with apt-get (OK for so far). Then I unpacked
the qce-ga driver and started compiling. At that moment the output was:
**
gandalf:/usr
大连鹏展公司最新研制远距离手机电话监听器，方圆5公里内的手机电话都可监听，国内外都可。
只要输入所监听的手机或电话的号码即可。但同时只能监听一部手机电话.每台680元。
公司网站www.188ok.com
联系人:王海，24小时热线； 13940974515 0411-7032201邮箱地址:[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Nitebirdz <[EMAIL PROTECTED]> said on Sat, 24 Jan 2004 15:19:55 -0600:
> On Fri, Jan 23, 2004 at 08:34:30PM +1100, Tim Connors wrote:
> >
> > Is there a browser that is acceptable for slow computers? My AMD K6II
> > 500MHz box takes forever to render a page, or even to switch tabs.
> I know this d
[EMAIL PROTECTED] (Niels L. Ellegaard) said on 24 Jan 2004 13:14:06 +0100:
> My only grudge is that if a Galeon window only has one tab, then the
> drag handle disappears. This means that I cannot drag the last
> remaining tab into another window. In other words I cannot empty a
> window for all ta
On Sat, Jan 24, 2004 at 07:30:31PM -0500, Rajesh Menon wrote:
>[...] not sure where to add these
> lines.
Either among the /etc/rc?.d/* scripts, or as a post-install in
/etc/modules.conf (man update-modules).
HTH
--
Jan Minar "Please do
On Sun, Jan 25, 2004 at 04:58:20AM -0800, Nano Nano wrote:
> The radical libertarian in me enjoys the concept of an O/S where user
> apps can trash the system. Protection faults just seem anti-democratic.
> I'd love to see a modern "equal-opportunity" O/S :-)
AFAIK, Linux 2.6 port for an MMU-les
On Sat, Jan 24, 2004 at 02:26:49PM +0100, Matthias Hentges wrote:
> There's no need for a script. Just use wget -> man wget.
Or ncftp.
HTH.
--
Jan Minar "Please don't CC me, I'm subscribed." x 9
pgp0.pgp
Description: PGP signature
On Sun, Jan 25, 2004 at 05:41:40PM -0500, David Clymer wrote:
> On Sat, 2004-01-24 at 09:54, Haines Brown wrote:
> I'm guessing that you've got your kernel compiled with usb mass storage
> verbose debug, and most likely, you'll see this kind of output any time
> you access your usb mass storage dev
On Sat, Jan 24, 2004 at 06:53:42AM -0500, Paul Morgan wrote:
> That will install a new kernel. I don't know your setup, but if you are
> using the standard setup, then IIRC the post install script will ask you
> questions and link your new kernel to /vmlinuz and your old (current) one
> to /vmlinu
On Sat, Jan 24, 2004 at 08:51:29AM -0600, matt zagrabelny wrote:
Is nameif(8) what you want?
> filename:/lib/modules/2.4.21/pcmcia/pcmf502r.o
Oops: Don't you have your kernel patched? At least 2 local root
exploits were reported since 2.4.21 that I _know_ about.
--
Jan Minar
On Sat, Jan 24, 2004 at 07:03:05PM +0100, Jan Ulrich Hasecke wrote:
> I encountered a strange problem today. Suddenly my notebook stops
> booting after starting klogd.
>
> I am running 2.6.1 and unstable.
>
> After booting into single user mode I tried to manually start
> everything in rc2.d via
On Sat, Jan 24, 2004 at 05:01:17PM -0800, Nano Nano wrote:
> Here's another view of that data:
What about this one?:
| Country Aid(Billions) People(Millions) Dollars/Person
| Australia 1 19.750.76
| Austria 0.5 8.1 61.73
| Belgium 1.1 10.2107.84
| Canada
On Sun, Jan 25, 2004 at 09:11:39AM +0200, Johannes Lehtinen wrote:
> So I need to disable the DMA right at boot. Usually this has been done
> by giving the kernel "ide=nodma" parameter but now with the modular
> kernel this does not appear to work.
The module should accept a similar parameter then
On Sun, Jan 25, 2004 at 07:44:07PM -0800, Nano Nano wrote:
> I use elinks -dump to get websites into text files.
> However, if the website contains tables, the output isn't well-formatted
> for a text editor -- all the tables become split lines.
Hi, Nano.
links is an awful botch. Designwise, it'
On Sun, Jan 25, 2004 at 08:07:34PM -0800, j smith wrote:
> i have been using Debian 3.0. today i install cable
> modem. however, during Debian installation, i say no
> to ethernet configuration, because at the time, i
> don't have ethernet card. now how to config my Linux
> box?
man interfaces
HT
On Sat, Jan 24, 2004 at 11:40:49AM +0100, Joris Huizer wrote:
> Now, when I'm on one of the tty' terminals, I get this message each time:
>
> INPUT packet died: IN=eth0 OUT= MAC= SRC=10.0.0.150 DST=10.0.0.255
> LEN=131 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=111
>
> it lo
On Sun, Jan 25, 2004 at 02:40:08PM +, raoul duke wrote:
> mplayer: /lib/libc.so.6: version `GLIBC_2.3' not found (required by
> /usr/lib/libvorbis.so.0)
Seems like libvorbis requires a feature not present in Woody's glibc
(v2.2), and is careful enough to check the versions--quick look at
the
On Sun, Jan 25, 2004 at 08:48:34PM -0700, Paul E Condon wrote:
> Also, he says that it runs on the PDP-11 and the Interdata 8/32, which
> contradicts my memory that it was developed on an earlier model DEC
> computer. But he does say that work on UNIX started in 1971. so maybe
> my memory is OK.
On Sun, Jan 25, 2004 at 11:17:13PM -0700, Matt Miller wrote:
> and /etc/syslog.conf says:
>
> cron.*/var/log/cron.log
Is it really not commented (i.e. no hash at the very beginning of that
line)? -- It seems like Woody r2 default syslog.conf reads:
| *.*;auth,authpriv.none
On Sun, Jan 25, 2004 at 09:42:10PM -0800, Nano Nano wrote:
> I asked an earlier question about e-links, let me ask it another way:
It seems like my reply didn't get through?
> linear text flows. I want to do the opposite of par or fmt.
Not quite: what You want is the opposite of paste(1) ;-
Is there a way of configuring konqueror so that mp3's can be ripped like ogg
files currently can via audiocd:/ -- the mp3 player in my car can't handle
ogg. (I am using sid - if that matters)
Thanks in advance,
R.J.P.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubsc
On Mon, Jan 26, 2004 at 04:26:55AM +0100, Jan Minar wrote:
> On Sun, Jan 25, 2004 at 02:40:08PM +, raoul duke wrote:
> > mplayer: /lib/libc.so.6: version `GLIBC_2.3' not found (required by
> > /usr/lib/libvorbis.so.0)
>
> Seems like libvorbis requires a feature not present in Woody's glibc
> (
On Mon, Jan 26, 2004 at 05:11:59AM +0100, Jan Minar wrote:
> links is an awful botch. Designwise, it's to browsers what MS-DOS is to
> OS's.
>
> > I don't much care for lynx output either. Is there a good way to get
> > table-oriented html pages into a text editor properly?
>
> w3m(1). It eve
Hi,
I use Galeon 1.3.11a with mozilla 1.5-3 underneath (testing?)
Arnt Karlsen wrote:
> On 24 Jan 2004 13:14:06 +0100,
> [EMAIL PROTECTED] (Niels L. Ellegaard) wrote in message
> <[EMAIL PROTECTED]>:
> > Arnt Karlsen <[EMAIL PROTECTED]> writes:
> >
> > > ..how about cookies? I generally wa
Had an S3 X problem (non-Mandrake) where the generic s3 selection
(detected by a Lindows live CD even ;-)) worked, but the actual specific
one did not, you could give that a shot
On Mon, 2004-01-26 at 09:17, mohammad assaf wrote:
> I tried to setup X for S3 trio 3D in debian, but falled. I alread
On 26 Jan 2004, Matt Price <[EMAIL PROTECTED]> wrote:
> So I asusme the script is running, but it's not receiving the data it
> needs, or at least not understanding it.
>
> Here's the script, which as ou see is very primitive:
> --
> cat /usr/local/scripts/movi
Em SÃb, 2004-01-24 Ãs 08:40, Joris Huizer escreveu:
> I recently set up iptables (that is, I replaced /etc/init.d/iptables
> with the script I got).
>
> Now, when I'm on one of the tty' terminals, I get this message each time:
>
> INPUT packet died: IN=eth0 OUT= MAC= SRC=10.0.0.150 DST=10.0.0.2
Em SÃb, 2004-01-24 Ãs 04:44, tripolar escreveu:
> I would like to download all files from an ftp site. probably 250 files
> some between 25-50 Megs.I am wondering about using wget with shell (
> bash) script to login, download all files, if one is found on harddrive
> ignore and goto next one. one
Hi guys,
I thinking about buying some form of portable hardware for my linux
system. It is for backing up my system and moving data from one system
to another.
I have load on infomation of several computers. Some of these computers
have no internet conection.
So i thinking about getting a Zip d
Em Seg, 2004-01-26 Ãs 04:17, Matt Miller escreveu:
> cron is logging to the active console and I don't know how to turn it
> off. Every couple minutes I get something like:
>
> cron(pam_unix)[15457]: session opened for user mail (uid=0)
> cron(pam_unix)[15457]: session closed for user mail
>
>
Em Seg, 2004-01-26 Ãs 09:46, Stephen Turner escreveu:
> So i thinking about getting a Zip drive or a jazz drive. Or something
> along these lines. It has to be able to work though the USB.
>
> But i have heard, that there are problems with drivers a such like
> things. For some hardware like this
On Mon, Jan 26, 2004 at 10:36:13AM -0200, Leandro Guimarães Faria Corcete Dutra wrote:
> Em Sáb, 2004-01-24 às 04:44, tripolar escreveu:
> > I would like to download all files from an ftp site. probably 250 files
> > some between 25-50 Megs.I am wondering about using wget with shell (
> > bash) scr
Hello
To do similar thing I recently bought a mobile harddrive
(USB 2.0 or firewire) [at freecom www.freecom.com ]:
the capacity of such mobile hard drives can be quite large (20/40/60 GB)
the unity of storage is cheap,
the size is smaller than my former ZiP (100) drive.
My box is a Debian testi
I followed instructions from:
http://www.linuxorbit.com/modules.php?op=modload&name=Sections&file=index&req=viewarticle&artid=541&page=1
to build alsa modules for my kernel 2.4.21-5-k7. I also edited the
config files as instructed. But when i /etc/init.d/alsa start the
following error message is
On Mon, Jan 26, 2004 at 11:31:07AM +, Colin Watson wrote:
ah, sorted it! /etc/libvorbis.so.0 was pointing to /etc/libvorbis.so.3,
there was also a /etc/libvorbis.so.0.1, so i removed /etc/libvorbis.so.0
and then pointed it at /etc/libvorbis.so.0.1, it works fine now. thanks all
the same 8)
-
>>and /etc/syslog.conf says:
>>
>> cron.* /var/log/cron.log
>Is it really not commented
No hash marks that I can see.
>It seems like Woody r2 default syslog.conf reads
>...
I'm running sarge.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
I'm trying to set up a proper firewall, and have a decent one set up so
far..
A few things I'm missing though are the ability to allow/deny ipranges,
so I have been looking around a bit, and saw that there was a module
called iprange.
How do I install this with debian? Doesn't seem like there is
Have you try the `firehol' pacakge available in testing ?
hth,
Jerome
Brian Schmidt wrote:
I'm trying to set up a proper firewall, and have a decent one set up so
far..
A few things I'm missing though are the ability to allow/deny ipranges,
so I have been looking around a bit, and saw that there
On Monday 26 January 2004 05:02 am, Steven Van Dorsselaer wrote:
> Then I unpacked the qce-ga driver and started compiling. At that
> moment the output was:
> cpp0: /lib/modules/2.4.18-bf2.4/build/include/linux/config.h: No such
> file or directory
> make: *** [quickcam.o] Error 1
Have you insta
On Monday 26 January 2004 10:11 am, Brian Schmidt wrote:
> Another thing with iptables I have been thinking of letting my firewall
> do, is to give a proper reply to connections on closed ports, rather
> than just dropping the connection.
Iptables comes with a REJECT target, used like this:
iptab
>>Every couple minutes I get something like:
>>
>>cron(pam_unix)[15457]: session opened for user mail (uid=0)
>Somehow syslog is not running.
'ps -A' shows that klogd is running, but no syslogd. When I try to
install the inetutils-syslog package I get conflicts with sysklogd,
which dselect is say
Ryan Mackay wrote:
Sometime near Sat, Jan 24, 2004 at 11:40:49AM +0100, Joris Huizer wrote:
Hello,
I recently set up iptables (that is, I replaced /etc/init.d/iptables
with the script I got).
Now, when I'm on one of the tty' terminals, I get this message each time:
INPUT packet died: IN=eth0 O
Hi all. Perhaps someone can help with a problem I've been having.
Been in the process of getting a new box configged (Debian stable), and
everything had been going fine. Had been using Firestarter to config the
box's firewall, but wasn't completely pleased with it. So I decided to give
gnome-lo
While trying to configure the source for gens (a sega genesis emulator)
I got the following error.
configure: error: cannot run /bin/sh ./config.sub
Does anyone know why I would get this error? I ran /bin/sh and it worked
fine. Is there not a package of gens for debian? Thanks in advanced for
any
brfg3 at yahoo <[EMAIL PROTECTED]> writes:
> 1. (*) text/plain ( ) text/html
(Please post to the mailing list in plain text only, and set your
mailer to wrap lines at 72 columns.)
> One of the authors in this thread seems to suggest that Debian 3
> already comes with 2.4.20
Paul Morgan <[EMAIL PROTECTED]> writes:
> On Sat, 24 Jan 2004 03:56:13 +0100, knoppix wrote:
>
> Kernels work differently than other debian packages. Each kernel revision
> is a *different* package. So, do:
>
> apt-get update
> apt-cache search kernel-image
> apt-get install kernel-image-whateve
On 24. January 2004 at 6:30PM -0500,
Rajesh Menon <[EMAIL PROTECTED]> wrote:
> Hi, again. I have the 4496 nVidia drivers installed on my
> debian sid running XF86 version 4.2.1.1 After startx, all the
> console terms from F1..6 are just blank (well, a nice glow is
> there at the bottom, but blank
John Foster([EMAIL PROTECTED]) is reported to have said:
> I have a Kodak DX6440 Camera. I have determined so far that I have to
> use it as root...& that ain't gonna happen. I also have determined that
> it has to be plugged in directly ...NOT through the docking port (at
> leasdt for now) So
On Mon, Jan 26, 2004 at 08:25:37AM -0700, Matt Miller wrote:
> >>Every couple minutes I get something like:
> >>
> >>cron(pam_unix)[15457]: session opened for user mail (uid=0)
>
> >Somehow syslog is not running.
>
> 'ps -A' shows that klogd is running, but no syslogd. When I try to
> install th
I noticed that Sarge has 12 iso's. Do I need to download them all or is
it like the stable version where you download just what you need?
Walt
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
hi
i recompiled 2.4.23 kernel and made kernel image
dpkg -i kernel-image...2.4.23200401261.deb .
in /boot/ dir there was kernel-2.4.23200401261 and
initrd-img-2.4.232004261 i updated my lilo.conf , made lilo boot disk
lilo -C /mnt/floppy/etc/lilo.conf . ok everything worked. wheen i
tried to boot m
On Mon, Jan 26, 2004 at 12:05:24PM -0500, walt frampus wrote:
> I noticed that Sarge has 12 iso's. Do I need to download them all or is
> it like the stable version where you download just what you need?
Rumor has it, the greater the number, the less likely you'll actually
need/want to install the
Hi,
I'm trying to install the flash plugin (6.0.79.0) but it isn't
working. When I try to acces some webpage which contains some flash,
the browser is closed. I'm using mozilla-firebird 0.6.1 but the same
problem happens when I'm using mozilla 1.4. I've tried to install the
plugin in 3 different p
On Mon, 2004-01-26 at 10:11, Brian Schmidt wrote:
> I'm trying to set up a proper firewall, and have a decent one set up so
> far..
> A few things I'm missing though are the ability to allow/deny ipranges,
> so I have been looking around a bit, and saw that there was a module
> called iprange.
>
Alan Chandler wrote:
I an trying to get my radeon 9200 based graphics to perform properly with 3D.
It worked with Gentoo, but now I've switched back to Debian, I can get it to
work, and I can't find out whats wrong.
I am using a standard "kernel-image-2.6.0-1-k7" debian package
"xserver-xfree
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
hello all,
i've got a problem with my video card. i'm running debian woody. i've installed
xawtv-3.90 from testing. scantv works fine scanning for all channels. but when i run
xawtv i get a black screen with audio from all channels. for xawtv my con
On Mon, Jan 26, 2004 at 01:05:08PM +0100, Philipp Weis wrote:
> On 26 Jan 2004, Matt Price <[EMAIL PROTECTED]> wrote:
> > So I asusme the script is running, but it's not receiving the data it
> > needs, or at least not understanding it.
> >
>
> Procmail sends the message via STDIN, so you would
On Monday 26 January 2004 12:59 pm, Daniel Ferreira wrote:
> I'm trying to install the flash plugin (6.0.79.0) but it isn't
> working. When I try to acces some webpage which contains some flash,
> the browser is closed. I'm using mozilla-firebird 0.6.1 but the same
> problem happens when I'm using
>>maybe /sbin/syslogd was somehow disappeared? Can I reinstall
>>this package without removing it (along with packages dependent on
>>it) and installing it again from scratch?
>``apt-get install --reinstall sysklogd'' should do.
This did the trick. cron is now quietly logging to
/var/log/cron.lo
On Tue, 13 Jan 2004 13:20:08 +0100, Julian Gilbey wrote:
Hi there,
> Anyone able to help on this one?
maybe me :)
>[...]
> 3c589_cs: RequestIRQ: Resource in use
Okay, I had the same problem with ne2k-cards: as soon as I inserted a card
into the second slot, the IRQ requested was in use..
I foun
>I'm trying to install the flash plugin (6.0.79.0) but it isn't
>working. When I try to access some webpage which contains some flash,
>the browser is closed. I'm using mozilla-firebird 0.6.1 but the same
>problem happens when I'm using mozilla 1.4.
Try Firebird 0.7/Mozilla 1.6 (or at least Mozilla
Hi.
/* Sorry if you get this more than once.
I was also struggling with email configuration,
and list subscription requests and confirmation
seem to have gotten a bit out of sync. */
I've installed Debian over the network from the default server
(Woody I think). It's my first time.
I cannot get
On Sun, Jan 25, 2004 at 01:34:32AM +0900, Bengt Thure'e wrote:
| Hej,
|
| I am wondering if Sarges Postfix works with SMTP Auth.
Yes.
| Have not managed to get it to work with PAM-SASLauthd
| If anyone have managed to get it working I would be delighted to receive
| some hints and tips...
Ins
On Thu, Jan 22, 2004 at 08:44:24PM -0500, Kevin Coyner wrote:
|
| On a box running Sid, I recently apt-get dist-upgrade'd Postfix. Prior
| to the upgrade I had Postfix running smoothly with a virtual setup based
| on MySQL tables. Additionally, I had Mailman integrated into
| everything.
|
| Af
Em Seg, 2004-01-26 Ãs 17:35, Marius Amado Alves escreveu:
> I've been configuring with xf86config and also hand editing.
> Is there another way?
Try dpkg-reconfigure xserver-xfree86.
> I don't know my monitor frequencies exactly.
This shouldn't be so relevant to your problem.
Stephen Turner myrealbox.com> writes:
> I thinking about buying some form of portable hardware for my linux
> system.
You might also consider a DVD+/-RW drive. Sony has both an internal and an
external model. Prices are very reasonable now; the internal (DRU-510A) can be
had for under $150US.
Incoming from Jan Minar:
> On Sat, Jan 24, 2004 at 05:01:17PM -0800, Nano Nano wrote:
> > Here's another view of that data:
>
> What about this one?:
>
> | Country Aid(Billions) People(Millions) Dollars/Person
> | Australia 1 19.750.76
> | Austria 0.5 8.1 61.73
> | Belgium
"Try dpkg-reconfigure xserver-xfree86."
Tried.
startx crashes with fatal errors
- AddScreen/ScreenInit failed for driver
- no screens found
for drivers
- vga
- s3virge (the only S3 item on the list)
respectively.
This is kinda what I had just after installation
and that made me start usin
Matt Price <[EMAIL PROTECTED]> writes:
> Now, if this information were stored in a file, it would be simple to
> manipulate with regex's:
>
> sed 's/@/ -at- /' addressfile
>
> But I don't see an obvious way to get sed or awwk to take variable values
> as input. I can do the following:
>
> FROM=`f
I downloaded and compiled kernel-source-2.6.0 but cannot connect to my
wireless LAN via the Netgear MA311 PCI Adapter.
Last February I downloaded linux-wlan-ng-0.1.16-pre10.tar.gz which I am
using with a compiled kernel-2.4.22. Make all with the kernel-2.6.0 fails.
Anyone have success setting
Marius Amado Alves <[EMAIL PROTECTED]> writes:
> I cannot get X to work properly.
>
> "startx" runs but shows in a 320x200 mode
> even though I select a higher mode in the configuration.
>
> Also, it shows only in the bottom half of the screen.
>
> The input devices seem to work. The problem is ju
On Mon, Jan 26, 2004 at 03:54:52PM -0500, David Z Maze wrote:
> Matt Price <[EMAIL PROTECTED]> writes:
>
> > Now, if this information were stored in a file, it would be simple to
> > manipulate with regex's:
> >
> > sed 's/@/ -at- /' addressfile
> >
> > But I don't see an obvious way to get sed or
Thanks to help, I now have my bash script (for copying mail to a web
page) working. Ideally I would do something slightly more complex:
copy mails to a web page, then forward those same mails on to a list
of addresses. So my originjal procmail recipe was:
:0:
* ? $FORMAIL -x"From:" -x"Sender
On Mon, Jan 26, 2004 at 01:19:38PM -0700, s. keeling wrote:
> Incoming from Jan Minar:
> > On Sat, Jan 24, 2004 at 05:01:17PM -0800, Nano Nano wrote:
> > > Here's another view of that data:
> >
> > What about this one?:
> >
> > | Country Aid(Billions) People(Millions) Dollars/Person
> > | Austral
agpgart IS being loaded on bootup. Two references.
r128 is being done as well, says with a 64m portal.
Results?
gl117 flight game kicks me off the machine. I get a new login screen !!
flightgear is still too slow to control or configure
foobilliards is the same, both still with a 1-sec frame rate
On Mon, Jan 26, 2004 at 01:19:38PM -0700, s. keeling wrote:
> I think the world's needy are going to be far happier with the US 12.9
> billion than they are going to be with Canada's paltry 2.0 billion.
> Or would you prefer they had Norway's _massive_ (per Capita)
> contribution of only 1.7 billio
On Mon, 26 Jan 2004 15:52:14 -0500
David Z Maze <[EMAIL PROTECTED]> wrote:
> > My card is a S3 TrioV64+, but I don't know the memory size. I've tried
> >>From 256k to 2M.
>
> I think S3 cards in general lost support between XFree86 3.3 and 4.0;
> you might try using the older X servers in woody,
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Mon, Jan 26, 2004 at 01:51:20PM -0800, Nano Nano wrote:
> [...], but anything which
> reduces the rhetorical strength of the terrorists and eurosnobs is
> probably useful.
YMMD.
--
Rico -mc- Gloeckner | 1024D/61F05B8C | jabber:[EMAIL PROTECTED]
ht
On Sun, Jan 25, 2004 at 09:19:50AM -0600, John Foster wrote:
> I have a Kodak DX6440 Camera. I have determined so far that I have to
> use it as root...& that ain't gonna happen.
I think you need to add an entry to /etc/fstab like:
#
/dev/sda1 /mnt/camera vfat
On 1/26/04 3:51 PM, "Nano Nano" wrote:
> Naively I would say the US "should" be giving about $55/person
Yeah Right! With world opinion of the US, many are lucky that the 12.9 is
even given.
Charity starts at home.
--
Thanks!!
David Thurman
List Only at Web Presence Group Net
--
To UNSUBSCR
Jerome R. Acks wrote:
> On Sat, Jan 24, 2004 at 03:49:40AM +0100, knoppix wrote:
>> Hi
>>
>> I got that problem if anyone could help
>>
>> I am trying to install a software on my debian
>>
>> When I run the ./configure it says :
>>
>> configure: error: Could not find libxslt anywhere, please c
Marius Amado Alves wrote:
> My card is a S3 TrioV64+, but I don't know the memory size. I've tried
> from 256k to 2M.
You mite try 4096 and 8192k as well. I have one of these cards.
I have also read other problem posts about it. It is commonly buggy.
--
To UNSUBSCRIBE, email to [EMAIL PROTECT
On Mon, 2004-01-26 at 14:35, Marius Amado Alves wrote:
>
>
> My card is a S3 TrioV64+, but I don't know the memory size. I've tried
> from 256k to 2M.
>
> I've tried S3 TrioV64+ as well as "generic" entries in sf86config.
>
That chipset is generally un/under supported by xfree86. I've tried an
Hi.
(Sorry if you get this more than once.
I'm also struggling with email configuration.)
I've installed Debian over the network from the default server
(Woody I think). It's my first time.
I cannot get X to work properly.
"startx" runs but shows in a 320x200 mode
even though I select a higher
Thanks for all the suggestions on firewalls, I will be looking at them,
and that was exactly what I was looking for, thanks Adam :)
Sincerely
Brian Schmidt
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Mon, Jan 26, 2004 at 05:11:59AM +0100, Jan Minar wrote:
> On Sun, Jan 25, 2004 at 07:44:07PM -0800, Nano Nano wrote:
> > I use elinks -dump to get websites into text files.
> > However, if the website contains tables, the output isn't well-formatted
> > for a text editor -- all the tables becom
On Mon, 2004-01-26 at 12:29, Rolando Abarca wrote:
> I just one to upgrade a few packages fron woody to testing, not all of
> them, for instance, mysqlserver, apache and X...
> What's the easiest way to do this without having to upgrade my entire
> system to testing?
>
> salud! (cheers!)
> funkast
Micha Feigin wrote:
> Dos people haven't figured out how to get more then one program running
> at a time and windows haven't figured out how to get a program running
> for more then five minutes without going into the infamous blue screen
> of death.
I dont do windoz, never have. But you are not
Al Davis wrote:
> At the time, I believed like the majority, that Henderson was just
> jealous of his competition, because he couldn't keep up. In hindsight,
> now I see it Henderson's way.
>
> How is this case different from GPL violations today?
>
> http://www.esva.net/~thom/philkatz.html
>
Do you know if your program will work with Mac OSX 10.3.2?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
On Mon, Jan 26, 2004 at 04:49:26AM +0100, Jan Minar wrote:
> On Sat, Jan 24, 2004 at 05:01:17PM -0800, Nano Nano wrote:
> > Here's another view of that data:
>
> What about this one?:
>
> | Country Aid(Billions) People(Millions) Dollars/Person
> | Australia 1 19.750.76
> | Austria
i have Debian 3.0, with default kernel, my ethernet
connection works, but with my customized kernel, the
connection fails.
below is message of default kernel:
Jan 27 07:47:11 a kernel: 3c59x.c 18Feb01 Donald
Becker and others
http://www.scyld.com/network/vortex.html
Jan 27 07:47:11 a kernel: pcne
1 - 100 of 158 matches
Mail list logo
