Micha Feigin on Thu 29 Jul:
> How can i set an environment variable under an x11 session
If you set environment variables in your .xsession file they should be
inherited by the session and thence by any program it executes.
If you want environment variables to persist only for a specific
program,
Hi all,
Having just downloaded a user profile, dselect seems to hang just
when it
should be ready to install. Going through the options the install shows
a
quick message I think is: cksum 5md. It flashes so fast and goes right
back to
the choice menu's so I'm not sure. TM for dselec
1) Ease of upgrade was a big decider for me (I switched over 2-1/2 years
ago--I can't speak for recent Red Hat releases). With Debian you can
upgrade a running system. Red Hat required booting with the equivalent
of a rescue disk in order to upgrade.
2) In spite of all the complaints it gets, I
On Wed, 28 Jul 1999, Min Xu wrote:
> Hi,
>
> You maybe able to remove it by reinstalling it first and then try.
>
> :-)
I tried that, but when it tries to remove the old version to replace it
with the new version it runs into the same error and gives up.
-Levi
On 29 Jul, virtanen wrote:
| Which kind of device driver module should I install to get that beast
| working? Or what should I do?
|
| It makes no effect at all with any of the possible protocols available
| with XF86Setup.
Perhaps you're not using the correct device (not driver)
On Tue, Jul 27, 1999 at 09:02:28PM +0200, J Horacio MG wrote:
>
> > Why does the following not work? If I don't get any reply from
> > debian-user, I will post to debian-devel, as I am reasonably certain I
> > got these packages from potato.
>
> I reported a bug a while ago about gpg-rsa2 and gpg
I have been trying for weeks now to get my Microsoft Inport Mouse to work
without success.
I have been back through the last four months archives hoping to find an
answer and have read all the documentation on Mice I can find.
Is there someone using a Microsoft Inport Mouse who can tell me their s
On Fri, 30 Jul 1999, Brian May wrote:
> > You need libc6 2.1.x - or you can grab the sources and recompile using
> > libc6 2.0.
>
> Thats what I did. However, the same problem also occurs on non-Debian
> archictures that don't have glibc. signing works fine - it is just
> encryption that I have
On Thu, Jul 29, 1999 at 06:37:10PM -0500, Oleg Krivosheev wrote:
> just installed gnomeicu and while trying to
> run it i got
>
>
> reboot ~ $ gnomeicu
> type = 0 exid = (null)
>
> ** CRITICAL **: file applet-widget.c: line 655
> (gnome_panel_applet_corba_init): assert
Hi,
When running apt-get upgrade, I get this error:
E: MD5Sum mismatch for package menu
Running Debian potato.
regards,
= = Andre M. Varon Lasaltech Incorporated
= = == Technical Head Fax-Tel: (034)435-0836
= == =
= = = E-mail : [EMAIL PROTECTED]
= WebPage : http://andre.lasalt
On Fri, 30 Jul 1999, A. M. Varon wrote:
> Hi,
>
> When running apt-get upgrade, I get this error:
>
> E: MD5Sum mismatch for package menu
>
> Running Debian potato.
Assuming you have 0.3.11, just run it again and/or switch mirrors. It
should automatically erase the downloaded file when it sho
I've been unsuccessful in getting my 3Com 3c529 MCA Ethernet card to
communicate with the network using the AUI port, although the 10baseT
(twisted pair) connection with the card works fine. The 3c529 is the MCA
(IBM's proprietary microchannel architecture for the PS/2 and other
machines) version
My reason for moving from RedHat (5.2) to Debian was configurability.
I have a cable modem, and connect to the internet via a DHCP client.
Redhat uses "dhcpcd" for this, as does most of the rest of the linux world.
Hoverver, after going to 2.2.x kernels, dhcpcd 0.70 croaks. I couldn't get
On Thu, Jul 29, 1999 at 08:29:30PM -0600, Jason Gunthorpe wrote:
> > > You need libc6 2.1.x - or you can grab the sources and recompile using
> > > libc6 2.0.
> >
> > Thats what I did. However, the same problem also occurs on non-Debian
> > archictures that don't have glibc. signing works fine - i
Just curious if anyone has succesfully installed Debian using the CD
that comes with the recent New Riders "Debian/GNU Linux" book? Booting
from the CD, my install fails at the "Install Operating System Kernel
and Modules" point. The install program seems to want to load a laptop
kernel, which app
Account for Debian group mail writes:
> Anyone using the Potato release on a machine that needs to be up. How
> stable is it at this point?
>
> Thanks,
>
> Ken Rea
There are a few *big* changes happening in potato right now. Changes
to key parts of just about every Linux system. I'd hold
Hi, I'm just enquiring about whether there is any streaming
video and audio software for Debian, or Linux in general.
Email me back at [EMAIL PROTECTED]
Thank you.
It started working.
Thank you.
(I just had to install the whole system again because it crashed for some
reason, which I still don't understand. Suddently the power goes off
sometimes while booting. It breaks the whole system, if it decides to do
that...)
I installed psaux driver and while in
Hello,
Bob Bernstein wrote:
> Is there a command that will do (so to speak) the inverse of chmod, i.e.
> if given the name of a file return its current permissions in octal?
kpsestat = FILE
You can also get `hypothetical' permissions by replacing the `=' with a
mode modification a la chm
Somebody might know how to configure xserver for this:
Matrox Productiva G100
Accelerator MGA G100
Memory 8M
Board mapping 0800
Ramdac speed 230 MHz
VGA Bios 1.1
The monitor it a Hyundai 17" (in that mO$ it is 1024x768)
I managed to get Xserver working in a way, but most of the
information
John Hasler wrote:
>
> Paul writes:
> > The pon command works much better but seems to disconnect if left alone
> > too long, though it`s fine as long as information is being transferred
> > constantly.
>
> Either your ISP is dropping your connection when it is idle too long, or
> you have someho
Hello.
In v3.3.3.1 of XFree86 there is support for the Productiva G100 AGP and
it works well.
You should use the SVGA-server for this card.
Just select the card (341 if I remember right) and the only thing you
should enter, besides manufacturer and model, is the amount of memory
which in your cas
Hello.
I had a similar problem, but solved it in another quick & dirty way.
Instead if meddling with the module-parameters I simply took the 3Com
Utility-disk, which was delivered with the card, booted it and used
their setup-program to switch to the Coax-port and not go by autodetect.
It might b
I'm going to use slink, but I need X 3.3.3 (I have a Matrox G200), so I'm
getting the 3.3.3.1 svga server right now... What more do I need? Can there
be problems with mixing different versions?
> reboot or anything. then I switched to debain and tried to run the
> install script again to re-install the sound drivers (after compiling
> the proper kernel of course). the script thought everything went
> allright, but xmms (and mtv and anything else that wanted to use sound)
> thought othe
> Also noticed that the standard Debian install package comes on 2 CD's,
> while the New Riders book has only a single CD. Is anything missing?
I'd say so, unless it is an older version, 2.1 has 2 discs.
Walter
__
Walter Logeman
I've put some information about using Linux on a Toshiba 4000CDT
on my website:
http://www.achc.demon.co.uk/linux/
Anthony
--
Anthony Campbell - running Linux Debian 2.1 (Windows-free zone)
Book Reviews: http://www.achc.demon.co.uk/bookreviews/
"The Moving Finger writes; and, having writ,
Mo
__
Get Your Private, Free Email at http://www.hotmail.com
Marcus Johansson wrote:
> I've not tested the sb-live driver yet, havent bought a card yet, so this is
> just what i've read in the driver archive.
Some companies will never learn ..
I do not like companies that don't suplly information to developers!
The only think the users can do is NOT TO
excuse me,
i don't get mail from list, so testing
Hi,
I have Debian 2.1 (dual boot with another OS...) sitting on a network here
at work. Under win95, dhcpcd always gives me the same IP address, but when
I boot under Debian, it always gives me a different IP which is annoying as
it makes it hard to find by others and myself on the network.
Hi,
I have a IBM PS/2 77-OUA 486SX with a 212 MB HD (I accept condolences).
It appears that cfdisk only detects 200 MB of the 212 MB.
Is this normal?
Thanks,
Brian
I have already sent this message to the list but I don't know
if it has arrived because of problems with my subscription
address, so I resend it:
I have a debian machine with an epson 900 printer;
I use samba to print from another machine with windows98;
here is the problem: when printing a lar
Respected Sir,
I have installed Debian Linux 2.0 on a Pentium 90 Mhz machine.
I am trying to configure so many things as I can . The major problem
I am facing is about the network. After configuring the network,
machine can connect to other machines on the network but
Hello:
What I find amazing about M$95/98 is that if you turn off
the screen saver, many problems disappear.
Peter
[EMAIL PROTECTED] wrote:
> I have already sent this message to the list but I don't know
> if it has arrived because of problems with my subscription
> address, so I resend it:
>
Hello:
edit /etc/hosts.deny and comment out the PARANOID line.
Bounce your portmap deamon or reboot your system and it should work.
Peter
"Mahendra D. Khandkar SBO" wrote:
> Respected Sir,
>
> I have installed Debian Linux 2.0 on a Pentium 90 Mhz machine.
> I am trying
hi mahendra ...
congrats on getting ur debian system up and going !!!
> I am facing is about the network. After configuring the network,
> machine can connect to other machines on the network but it is not allowing
ok..so ur networking is working fine..
> other machines to connect to itself.
Peter Iannarelli <[EMAIL PROTECTED]> writes:
> Hello:
>
> What I find amazing about M$95/98 is that if you turn off
> the screen saver, many problems disappear.
thanks for your answer, Peter, but I had already tried that;
the screen saver is disabled;
Hubert
Since no one has responded will add a few more comments. I now see the
message
is md5sum. I was new installing using apt I downloaded a user profile.
It looked
like apt drew all files from stable main. Just got to the end of all the
downloading when dselect now shows the message md5sum. Have cke
On Sun, Jul 25, 1999 at 03:11:40PM -0500, Brad wrote:
> Now, the only question is "Which package did this?"...
Back in the 1.1 or 1.2 days there was this magic bug where the
permissions on /tmp would get screwed up -- they would become
-rwxr-xr-x or something like that. A lot of apps don't handle
Hi,
have a look at the package psputils. You will need a ppd-file for your
printer but that should be on the CDROM shipped with the printer.
-Peter
Subject: HP LaserJet 2100TN question
Newsgroups: linux.debian.user
Date: 26 Jul 99 04:02:41 GMT
From: [EMAIL PROTECTED] (Dan Hugo)
I have this pr
On Mon, Jul 26, 1999 at 08:06:51PM +0100, [EMAIL PROTECTED] wrote:
> On Mon, Jul 26, 1999 at 12:27:57PM -0500, Stephen Pitts wrote:
> > It still needs an MTA to send mail :-)
> Not necessarily on the same machine. Imho no mua should bepend on amta,
> just recommend. Dselect will make you install re
On Thu, Jul 29, 1999 at 11:42:44AM -0400, Carl Mummert wrote:
> Get 'tom's unix on a floppy' or any other linux boot disk. The debian
> rescue disk may work, but I never use ti so I don't know.
>
> Boot that floppy in your machine, and mount the partition of your
> hard disk that contains /etc on
Hamish Moffatt <[EMAIL PROTECTED]> writes:
> Instead of loading init, bash is loaded, giving you a root shell.
> Mount the root file system read/write, run passwd, then reboot.
Couldn't this break the filesystem?
Isn't a sync or remount as read-only needed?
--
I congratulate you. Happy goldfis
Miquel van Smoorenburg <[EMAIL PROTECTED]> writes:
>
> People think that the NIS package does far more than it actually does;
> the only thing it does is keeping an eye on the current nis server (ypbind).
> All NIS access is actually handled by glibc
>
Okay, but which version of libc6 is supposed
Quoting Matthew Munsey ([EMAIL PROTECTED]):
> I've been unsuccessful in getting my 3Com 3c529 MCA Ethernet card to
> communicate with the network using the AUI port, although the 10baseT
> (twisted pair) connection with the card works fine. The 3c529 is the MCA
> (IBM's proprietary microchannel ar
Micha> How can i set an environment variable under an x11 session
Micha> (not a specific xterm under x) so that they work for
Micha> programs not opened through a terminal ( for example the
Micha> CVSROOT var for tkcvs)
> /etc/environment should do it.
How do you export varia
Quoting Dean ([EMAIL PROTECTED]):
> Since no one has responded will add a few more comments. I now see the
> message
> is md5sum. I was new installing using apt I downloaded a user profile.
> It looked
> like apt drew all files from stable main. Just got to the end of all the
> downloading when
Hi,
I would like to set up the latest version of GNOME on my debian 2.1 (slink)
box. However I do not know what is the best way to go about it. Can someone
please point me to the best way to install gnome without using apt. Would the
it be best for me to use apt (as described on the gnome pages
"Brian J. McHugh" wrote:
>
> Hi,
>
> I have a IBM PS/2 77-OUA 486SX with a 212 MB HD (I accept condolences).
>
> It appears that cfdisk only detects 200 MB of the 212 MB. Is this normal?
>
> Thanks,
> Brian
This may be your standard Manufacturer Calling 1,000,000 bytes a
MB when it's reall
Quoting Shao Zhang ([EMAIL PROTECTED]):
>
> while (1) {
> if ((NewHandle = accept(CGIHandle, (struct sockaddr
> *)&CGI_addr, \
> &sin_size)) == -1) {
> perror("cannot accept");
> continue;
> }
>
>
"Mahendra D. Khandkar SBO" wrote:
> I have installed Debian Linux 2.0 on a Pentium 90 Mhz machine.
> I am trying to configure so many things as I can . The major problem
> I am facing is about the network. After configuring the network,
> machine can connect to other machines on the n
->> who have administered both dists.
I have administered both boxes. As mentioned with redhat you can not use
both linuxconf and edit the scripts by hand. As far as the scripts with
redhat once you inderstand how they are put together you can edit them by
hand just as easy as another dist. My big
Quoting Michael Edward Christman ([EMAIL PROTECTED]):
> I'm trying to write between the application level and the kernel. I am
> using version 2.0.34 and am attempting to use memcpy_tofs and
> memcpy_fromfs, but am having some trouble. If I use these functions in
> the application level, what do
Michael,
Thank you for the follow up. I will make a note of your new address.
Michele A. Banza
Access Data Consulting
1-888-878-2322
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
Michael Merten
Sent: Thursday, July 29, 1999 8:49 PM
To: Michele Banza
Subje
On Fri, 30 Jul 1999, Ben Crocker wrote:
> Hi, I'm just enquiring about whether there is any streaming video and
> audio software for Debian, or Linux in general.
Realaudio 5.0 works pretty well. There is wrapper/installer for debian.
regards,
= = Andre M. Varon Lasaltech Incorporated
= =
On Thu, 29 Jul 1999, Jason Gunthorpe wrote:
> > When running apt-get upgrade, I get this error:
> >
> > E: MD5Sum mismatch for package menu
> >
> > Running Debian potato.
>
> Assuming you have 0.3.11, just run it again and/or switch mirrors. It
> should automatically erase the downloaded file w
Where? can I get this beast?
Freshmeat tell me to go to microsoft, but they don't have it..
--
Matthew McFarlane
-
> Where? can I get this beast?
Not likely. For over a year I think, Microsoft's site has said that
netshow for linux would be available "in a few weeks". Can we say
"vaporware"?
Paul writes:
> Here it is.
Looks normal, except for 'passive' being enabled (that doesn't account for
your problem).
> I still find it curious however that I if this is an ISP problem and I
> need to ping every so often that a week or so ago I had Wvdial working
> fine without doing so.
ISP's do
Hi,
>>"thomas" == thomas <[EMAIL PROTECTED]> writes:
thomas> Hi, not sure were this email should go but i give
thomas> [EMAIL PROTECTED] a try...
The most appropriate list, in this case, would have been
debian-user@lists.debian.org, where there is a greater chance of more
people list
LOL! how the heck did this get to the list? Must've been in the
wrong folder when I e-mailed her. Sorry for the wasted bandwidth
:/
On Fri, Jul 30, 1999 at 08:17:34AM -0600, Michele Banza wrote:
> Michael,
>
> Thank you for the follow up. I will make a note of your new address.
>
> Michele A
On 30 Jul, [EMAIL PROTECTED] wrote:
|
| I'm going to use slink, but I need X 3.3.3 (I have a Matrox G200), so I'm
| getting the 3.3.3.1 svga server right now... What more do I need? Can there
| be problems with mixing different versions?
|
|
I upgraded to potato for this very r
On Fri, 30 Jul 1999 egm2@jps.net wrote:
> On 30 Jul, [EMAIL PROTECTED] wrote:
> |
> | I'm going to use slink, but I need X 3.3.3 (I have a Matrox G200), so I'm
> | getting the 3.3.3.1 svga server right now... What more do I need? Can
> there
> | be problems with mixing different vers
On 30 Jul, Robert Rati wrote:
| I'm running Xfree 3.3.3.1 on my slink system without any problems at all.
| I just got the debs from ftp://ftp.netgod.net/x and they work fine.
|
Really, well when I last checked, there were no drivers for the Matrox
Millenium G200 8MB AGP card in XFree
Hi,
launching w3 en XEmacs version 20.4 from packages 20.4-13 gives the
followin error: Invalid regexp: "Invalid preceding regular expression"
That happens with M-x w3 and M-x w3-fetch as well.
Any Idea
Thanks.
--
__
Felipe Alvarez Ha
Hey,
(sorry if this isn't threaded right -- I am on the digested version of
debian-user)
I will have to check my 3c529 at home, but I think you have to boot off
the reference disk and select the transceiver before the driver will use
it.
Good luck,
-Jonathan
---
Pine can do quite well with the MTA on a remote machine as well (simply
set the smtp server in setup/config), so let's not throw this on Messenger
only, real MUAs have the capability to check POP/IMAP mail without a local
copy of a MTA as well. IIRC you could use elm to check POP mail without a
l
Hi
On Fri, Jul 30, 1999 at 10:09:51PM +1000, Hamish Moffatt wrote:
> On Mon, Jul 26, 1999 at 08:06:51PM +0100, [EMAIL PROTECTED] wrote:
> > On Mon, Jul 26, 1999 at 12:27:57PM -0500, Stephen Pitts wrote:
> > > It still needs an MTA to send mail :-)
> > Not necessarily on the same machine. Imho no m
Hi,
[cross posted to debian-user, since this has gone beyond the
charter of the -mentor list] ;-)
>>"Joseph" == Joseph Carter <[EMAIL PROTECTED]> writes:
>>"Brian" == Brian May <[EMAIL PROTECTED]> writes:
Brian> So we agree. You wouldn't sign the key without checking the
Brian> f
Where can i find help for the c++ functions?
exept for the info page on iostream i couldn't find any info on the other
libraries or functions of c++.
Thanx
[EMAIL PROTECTED]
On Fri, Jul 30, 1999 at 09:43:35AM -0400, Evan Van Dyke wrote:
> "Brian J. McHugh" wrote:
> > It appears that cfdisk only detects 200 MB of the 212 MB. Is this normal?
>
> This may be your standard Manufacturer Calling 1,000,000 bytes a
> MB when it's really 1048576 bytes so they can call their
>
On Fri, 30 Jul 1999 egm2@jps.net wrote:
> On 30 Jul, Robert Rati wrote:
>
> | I'm running Xfree 3.3.3.1 on my slink system without any problems at all.
> | I just got the debs from ftp://ftp.netgod.net/x and they work fine.
> |
>
> Really, well when I last checked, there were no driv
It's been a while since I've last installed Debian from scratch. Is ViM
the default vi clone installed? I thought it was another clone. Anyone
know?
Rob
===
[EMAI
Thanks David, worked great.
The dselect manual for beginners should definitely have this
information. For
some reason the manual assumes dselect will handle any and all
installing and
configuing. I'll leave David's response for manual maintainer. Dean
> Presumably you have a lot of .deb fil
On Tue, Jul 27, 1999 at 02:29:34PM -0400, Bryan Scaringe wrote:
> I never did get the dhcpcd client (the new one, with 2.2.x support) under
> either RedHat or Debian. But dhclient is a much cleaner program.
Its in the dhcpcd-sv package in potato. The init script is really
clever, it won't start dh
* Manoj Srivastava said:
> thomas> when opening.. If you please could let me know which package
> thomas> i shall downgrad or upgrade to get it work again i would be
> thomas> very glad since i use soffice everyday..
>
> I am not sure, but quite possibly the issue may be the libc
> upg
On Fri, Jul 30, 1999 at 07:50:52PM +0300, Micha Feigin wrote:
> Where can i find help for the c++ functions?
> exept for the info page on iostream i couldn't find any info on the other
> libraries or functions of c++.
>
C++ implementations vary greatly between platforms, and even
between differen
On Fri, Jul 30, 1999 at 11:59:39AM -0500, Robert Rati wrote:
> It's been a while since I've last installed Debian from scratch. Is ViM
> the default vi clone installed? I thought it was another clone. Anyone
> know?
Nope, nvi is, because it is bug-for-bug compatible with VI. Also,
I believe tha
On Wed, Jul 28, 1999 at 11:03:28AM +0300, Halis Osman Erkan wrote:
>
> I want to learn more about
>
> minimum delay
> maximum throughput
>
> in ftp and telnet
>
> there would be a way to make settings to provide them.
> iphains TOS bit can do this ; i know ;
>
> But HOW? and whats the logic?
>
Hi,
I'm trying to start postgres 6.5.1 just compiled in my slink
system and I'm getting the above error. What could be the problem? How to
fix it?
I'm using 2.2.10 kernel with the updated netbase and lsof (from
the Debian page).
Thanks,
Mario O.de Menezes"Many
Micha Feigin wrote:
>
> Where can i find help for the c++ functions?
> exept for the info page on iostream i couldn't find any info on the other
> libraries or functions of c++.
There is avery good STL documentation in
main/binary-i386/doc/stl-manual_.deb
I haven't found any really good documa
On Fri, Jul 30, 1999 at 11:41:37AM -0500, Manoj Srivastava wrote:
/*
* keeping -mentors for this message only, replies are likely to get even
* more off-charter for that group, so don't reply there. Note I'm not
* subscribed to -user, however...
*/
> Yes, though now that you point it
Hi,
I'm trying to share my Linux home directory so that i can maintain it from
my NT box. I've installed Samba 2.0 with encrypted passwords.
I can see the samba server from NT (nethood) but i can't get through NT's
login dialog box when i try to map that directory. No matter what login i
insert i
Subject: minimum delay & maximum throughout
Date: Wed, Jul 28, 1999 at 11:03:28AM +0300
In reply to:Halis Osman Erkan
Quoting Halis Osman Erkan([EMAIL PROTECTED]):
>
> I want to learn more about
>
> minimum delay
> maximum throughput
>
> in ftp and telnet
>
> there would be a
Your Smaba passwords and your user passwords do no necessisarily match.
Check out the "smbpasswd" command...
On Fri, 30 Jul 1999, Carlos Santos wrote:
> Hi,
>
> I'm trying to share my Linux home directory so that i can maintain it from
> my NT box. I've installed Samba 2.0 with encrypted pass
I am interested in contacting anyone using CUPS Common Unix Printing
System on a Debian Linux Slink box. I want to know how it stacks up
against other print managment systems such as apsfilter, or magicfilter
(my current one). I am trying to find some way to get my Canon LBP430
and old ExecJet IIc
Can someone save me some time and send me an example of a ProFTPd configuration
file that works correctly for both anonymous and local users. Currently mine
lets anonymous FTP, but not me :-)
Thanks
Bruce
I'm using a Creative Nvidia TNT-1 display card in one of my servers. It
consistentently goes dark on reboot - I have to power-clear to see the display
again. Does anyone know why?
Thanks
Bruce
I'm trying to install package man.
When I `apt-get install man` I get a message that states "E: package man
has no installation candidate." What does this mean?
--
Paul Nesbit
Algonquin College
Computing Science / Computer Technology
On Fri, Jul 30, 1999 at 20:24:52 +0200, Bernhard Rieder wrote:
> I haven't found any really good documantation about the rest of the C++
> library.
If you have a good net connection,
http://www.dinkumware.com/htm_cpl/
is nice.
HTH,
Ray
--
Cyberspace, a final frontier. These are the voya
Carlos Santos wrote:
> I'm trying to share my Linux home directory so that i can maintain it from
> my NT box. I've installed Samba 2.0 with encrypted passwords.
>
> I can see the samba server from NT (nethood) but i can't get through NT's
> login dialog box when i try to map that directory. No ma
On Fri, Jul 30, 1999 at 12:25:15 -0500, Stephen Pitts wrote:
> A word of warning: In my (albeit limited) experience, C++ and
> the STL has been more of a pain than a blessing. I wrote several
> programs that used the STL for linked lists and sorting, and
> found out that FreeBSD is not up to par wi
Carlos Santos wrote:
> I can see the samba server from NT (nethood) but i can't get through NT's
> login dialog box when i try to map that directory. No matter what login i
> insert it keeps refusing to connect.
Another tip:
You can also turn on the debug and look into smb.log on /var...
--
Fern
On Fri, 30 Jul 1999, Wayne Topa wrote:
> > there would be a way to make settings to provide them.
> > iphains TOS bit can do this ; i know ;
> >
> > But HOW? and whats the logic?
Don't get too excited; the delay/throughput options don't do anything
(anywhere on the Internet. It's not a Linux is
*- On 30 Jul, Paul Nesbit wrote about "apt-get"
> I'm trying to install package man.
>
> When I `apt-get install man` I get a message that states "E: package man
> has no installation candidate." What does this mean?
>
It means there is not package called man. You want man-db.
--
Brian
---
Greetings,
I hope this is not to far off topic :-]
I have to learn to use a database for a CS assignment. I have the choice
of either postgres or MySQL. My question is this, are there any reasons
that I should pick one over the other? I would like to learn something
that I can eventually turn to g
> I'm trying to install package man.
I assume you mean you want the package that gives you the man command.
This package is actually man-db, not man.
> When I `apt-get install man` I get a message that states "E: package man
> has no installation candidate." What does this mean?
There is no De
On Fri, Jul 30, 1999 at 10:57:11AM -0600, Nathan Duehr wrote:
> No, security.debian.org is a relatively new thing and probably isn't as
> documented as it should be. It's not the same as proposed-updates.
Oh. OK.
> I don't understand the question about sources.list -- if you mean is there
> a l
i had 1.0.9 gtk and i wanted to upgrade (for gaim) that required a new
version of glib, i installed 1.2.3 but gtk+ during ./configure still
says i have an old version, anyone know how i can make it recognize?
thanks
1 - 100 of 122 matches
Mail list logo
