Thanks to Rafal I did find the Tapo line (from TP-Link) that uses WiFi
and can be scheduled through the Tapo app which will do for now. I
bought some of the P125M and P400M models. The P125M is an indoor unit
and the P400M is for outdoor use and features two NEMA 5-15R outlets.
Both models
On Mon, 13 Jan 2025 11:43:04 -0600
Nate Bargmann wrote:
> As part of the scripting I plan is to monitor the local temperature
> from my weather station and adjust accordingly in ways such as the
> time to power the heater or even whether to turn it off should a
> temperature rise occur through th
* On 2025 13 Jan 04:07 -0600, Rafał Lichwała wrote:
> If I understood you correctly, the key problem here is "being exposed to
> outdoor".
>
> I think you may search for "outdoor wifi plug":
>
> https://www.amazon.com/outdoor-smart-plug/s?k=outdoor+smar
If I understood you correctly, the key problem here is "being exposed to
outdoor".
I think you may search for "outdoor wifi plug":
https://www.amazon.com/outdoor-smart-plug/s?k=outdoor+smart+plug
Also, I think there is nothing wrong with that the given solution is
p
On 13/1/25 05:49, Nate Bargmann wrote:
As the knowledge base on this list is wide and deep, I am asking to cut
through the commercial clutter. Ideally, what I would like to find is a
WiFi (802.11a/b/g) capable device that would plug into the end of an
extension cord (common US NEMA 5-15
On Sun, Jan 12, 2025 at 4:50 PM Nate Bargmann wrote:
>
> As the knowledge base on this list is wide and deep, I am asking to cut
> through the commercial clutter. Ideally, what I would like to find is a
> WiFi (802.11a/b/g) capable device that would plug into the end of an
>
Hi All.
As the knowledge base on this list is wide and deep, I am asking to cut
through the commercial clutter. Ideally, what I would like to find is a
WiFi (802.11a/b/g) capable device that would plug into the end of an
extension cord (common US NEMA 5-15 receptacle/plug) and allow me to
tualBox (VB) and Windows on Debian
On 19/07/2024 11:11, George at Clug wrote:
And I gave up on setting up Bridges on Wireless network interfaces as I
think each wireless connection is treated as a new network interface.
NAT allows to create a network for virtual machines in the case of
outgoing WiFi connection.
I have had some luck with problem WiFi on laptops by setting the acpi_osi
type to one of various windows types on the kernel command line.
You can add it in /etc/default/grub
Remember to run update-grub after editing it.
Hello, I have a HP Compaq Presario CQ 60 notebook from 2009, I have this
WiFi problem with any GNU/Linux distro: I have to leave the WiFi always
active, if I turn it off it doesn't turn on anymore, to restart it I have
to restart the notebook.
I currently use Debian Bookworm 12 but in my op
hardware refresh, and supplied ~50 employees with new Dell
laptops. I don't recall the model, but they had integrated Intel wifi.
The laptops would connect via wifi, and disconnect after about 10
minutes. Dell support told us we needed to update the BiOS or UEFI. It
fixed the problem.
So the
Install the latest UEFI firmware for the machine, and then re-run
> > the tests.
> >
> > I do not mind that it is a useful suggestion in general and should be
> > followed, but I am curious if it has ever helped you in specific
> cases
> > of i
ld be
followed, but I am curious if it has ever helped you in specific cases
of intel wifi cards.
My bad. I was talking about the manufacturer's UEFI firmware; not a
linux-firmware package.
I am not trying to dispute your suggestion, I had a hope to get a data
point with a success
rious if it has ever helped you in specific cases
> of intel wifi cards.
>
My bad. I was talking about the manufacturer's UEFI firmware; not a
linux-firmware package.
Jeff
latest UEFI firmware for the machine, and then re-run the tests.
I do not mind that it is a useful suggestion in general and should be
followed, but I am curious if it has ever helped you in specific cases
of intel wifi cards.
My experience with it is far from being positive. Some days firmware
On Thu, May 9, 2024 at 5:44 PM Unni wrote:
> Hello,
>
> Wifi is getting disconnected randomly on debian. dmesg shows
>
>
> --
>
> [ 278.360346] iwlwifi :09:00.0: Queue 5 is stuck 8 21
> [ 278.360447] iwlwifi :09:00.0: Microcode SW error detected.
> R
Hello,
Wifi is getting disconnected randomly on debian. dmesg shows
--
[ 278.360346] iwlwifi :09:00.0: Queue 5 is stuck 8 21
[ 278.360447] iwlwifi :09:00.0: Microcode SW error detected.
Restarting 0x0.
[ 278.360566] iwlwifi :09:00.0: Start IWL Error Log Dump:
[ 278.360568
Jeffrey Walton writes:
> On Mon, Mar 4, 2024 at 4:58 PM Greg wrote:
>>
>> On 2/26/24 18:52, Kamil Jońca wrote:
>> [...]
>> >
>> > What if:
>> > network = {
>> > ssid="ssid"
>> > key_mgmt=WPA-EAP
>> > eap=PEAP
>> > identity="uid"
>> > phase2="auth=MSCHAPV2"
>> >
On Mon, Mar 4, 2024 at 4:58 PM Greg wrote:
>
> On 2/26/24 18:52, Kamil Jońca wrote:
> [...]
> >
> > What if:
> > network = {
> > ssid="ssid"
> > key_mgmt=WPA-EAP
> > eap=PEAP
> > identity="uid"
> > phase2="auth=MSCHAPV2"
> > mesh_fwding=1
> > password="pas
On 2/26/24 18:52, Kamil Jońca wrote:
[...]
What if:
network = {
ssid="ssid"
key_mgmt=WPA-EAP
eap=PEAP
identity="uid"
phase2="auth=MSCHAPV2"
mesh_fwding=1
password="pas"
}
Bingo! Dzięki wielkie, ułatwiłeś mi życie.
Regards
Greg
Grzesiek Sójka writes:
[...]
> According to the instruction the settings should be:
> WPA2 Enterprise,
> PEAP,
> MSCHAPv2,
> no certificate.
>
> And my wpa config is:
> network={
> ssid="ssid"
> proto=RSN
> key_mgmt=WPA-EAP
> pairwise=CCMP
> auth_alg=OPEN
> eap=MSCHAPV2
>
On Mon, Feb 26, 2024 at 12:03 PM Grzesiek Sójka wrote:
>
> Hi there,
>
> I'm trying to connect to wifi at work, unfortunately I get the following:
>
> wlan0: SME: Trying to authenticate with 24:81:3b:2a:0f:e1 (SSID='ssid'
> freq=2412 MHz)
> wlan0: Trying to
Hi there,
I'm trying to connect to wifi at work, unfortunately I get the following:
wlan0: SME: Trying to authenticate with 24:81:3b:2a:0f:e1 (SSID='ssid'
freq=2412 MHz)
wlan0: Trying to associate with 24:81:3b:2a:0f:e1 (SSID='ssid' freq=2412
MHz)
wlan0: Associat
On Sat, Feb 10, 2024 at 02:41:42PM -0600, Exeonz wrote:
> Results on ubuntu are
>
> /03:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM4360
> 802.11ac Wireless Network Adapter [14e4:43a0] (rev 03)
> Subsystem: Apple Inc. BCM4360 802.11ac Wireless Network Adapter
> [106b:0117
On Sun, Feb 11, 2024 at 12:08:08AM -0600, Exeonz wrote:
> I just tried using Trixie and it's the same issues. Seems that the installer
> isn't even recognizing wifi card at all so no matter what drives I give it
> refuses to use them. *No Ethernet card was found on the system.
Am 10.02.2024 um 14:41:42 Uhr schrieb Exeonz:
> /03:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries
> BCM4360 802.11ac Wireless Network Adapter [14e4:43a0] (rev 03)
> Subsystem: Apple Inc. BCM4360 802.11ac Wireless Network Adapter
> [106b:0117]
> Kernel driver in use: wl
I just tried using Trixie and it's the same issues. Seems that the
installer isn't even recognizing wifi card at all so no matter what
drives I give it refuses to use them. *No Ethernet card was found on the
system.* I think my only option is using wifi usb adapter that works, I
alr
On Sat, Feb 10, 2024 at 1:07 PM Exeonz wrote:
> Hey thanks for your time in advance. I'm trying to install debian bookworm
> 12.4 on MacbookAir7,2 that doesn't have an ethernet port and the installer
> doesn't recognize it's wifi card and what drivers it needs
Results on ubuntu are
/03:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries
BCM4360 802.11ac Wireless Network Adapter [14e4:43a0] (rev 03)
Subsystem: Apple Inc. BCM4360 802.11ac Wireless Network Adapter
[106b:0117]
Kernel driver in use: wl
Kernel modules: bcma, wl/
D
tinst installer at least through the relevant
> installation phase. Then please capture the logs, probably under
> /var/log. Searching syslog on the word "firmware" should turn up some
> interesting messages.
As I wrote in the other reply, I was mainly concerned about Wifi not
working after installation (I wanted to understand it). I can install
from LAN.
Many Thanks for the reply,
Felix
--
Felix Natter
ded and I can
>> connect to a WIFI network. However, if I use the same stick
>> (or one with debian 12.4.0 netinst) with the installation option,
>> the LAN is recognized, but WLAN is not.
>
> Hope I'm wrong, but I've heard that D-I has trouble with USB devices ot
Am Sat, 10 Feb 2024 05:55:17 -0600
schrieb Exeonz :
> I'm trying to install debian bookworm 12.4 on MacbookAir7,2 that
> doesn't have an ethernet port and the installer doesn't recognize
> it's wifi card and what drivers it needs for the card to work. From
> search
Hey thanks for your time in advance. I'm trying to install debian bookworm
12.4 on MacbookAir7,2 that doesn't have an ethernet port and the installer
doesn't recognize it's wifi card and what drivers it needs for the card to
work. From searching the web I found that it us
Hey thanks for your time in advance. I'm trying to install debian bookworm
12.4 on MacbookAir7,2 that doesn't have an ethernet port and the installer
doesn't recognize it's wifi card and what drivers it needs for the card to
work. From searching the web I found that it us
On 08/02/24 at 19:24, Felix Natter wrote:
Dear debian-users,
I put this on a stick and booted it:
debian-live-12.4.0-amd64-gnome.iso
When I boot the live option, the network is immediately loaded and I can
connect to a WIFI network. However, if I use the same stick
(or one with debian 12.4.0
On Thu, 08 Feb 2024 19:24:35 +0100
Felix Natter wrote:
> If I start a shell from the installer, I can see that the necessary
> module rtl8xxxu is loaded (the same one that is loaded in live
> option). So I guess it is a firmware issue. How can I get an
> installer with non-free firmware (if that
Dear debian-users,
I put this on a stick and booted it:
debian-live-12.4.0-amd64-gnome.iso
When I boot the live option, the network is immediately loaded and I can
connect to a WIFI network. However, if I use the same stick
(or one with debian 12.4.0 netinst) with the installation option,
the
On 24/01/2024 04:18, Geert Stappers wrote:
|root@nero:~# nmcli device | grep -e wifi -e gsm
|ttyACM1 gsm unavailable --
|wlp2s0wifi unavailable --
If the devices are hard-blocked then you may need to enable them in
firmware (BIOS) setup. Old
On Mon, Jan 22, 2024 at 06:36:57AM +0200, Anssi Saari wrote:
> Geert Stappers writes:
> >
> > Here on a laptop does `ip link` see a WIFI device,
> > but `nmcli device` does not.
>
> And you're sure wwx028037ec0200 is a WIFI device? My WWAN device
> sometim
David Wright writes:
> On Mon 22 Jan 2024 at 06:36:57 (+0200), Anssi Saari wrote:
>> And you're sure wwx028037ec0200 is a WIFI device? My WWAN device
>> sometimes comes up with a wwx ID like that, sometimes wwan0. I even
>> explicitly rename it to wwan0 if that h
On Mon 22 Jan 2024 at 06:36:57 (+0200), Anssi Saari wrote:
> Geert Stappers writes:
> >
> > Here on a laptop does `ip link` see a WIFI device,
> > but `nmcli device` does not.
>
> And you're sure wwx028037ec0200 is a WIFI device? My WWAN device
> sometim
Geert Stappers writes:
> Hello,
>
>
>
> Here on a laptop does `ip link` see a WIFI device,
> but `nmcli device` does not.
And you're sure wwx028037ec0200 is a WIFI device? My WWAN device
sometimes comes up with a wwx ID like that, sometimes wwan0. I even
explicitly ren
On Sun 21 Jan 2024 at 18:24:53 (+0100), Geert Stappers wrote:
> On Sun, Jan 21, 2024 at 05:34:53PM +0100, Marco Moock wrote:
> > Am 21.01.2024 um 17:21:13 Uhr schrieb Geert Stappers privat:
> >
> > > It was a firmware thing.
> >
> > How did you solve it?
> >
>
> In the private[1] message was, b
On Mon 22 Jan 2024 at 00:05:08 (+0700), Max Nikulin wrote:
> On 21/01/2024 23:33, Geert Stappers wrote:
> > The repair:
> >
> > wget
> > http://deb.debian.org/debian/pool/non-free/f/firmware-nonfree/firmware-iwlwifi_20210315-3_all.deb
> >
> > sudo dpkg -i firmware-iwlwifi_20210315-3_all.deb
>
>
On Sun, Jan 21, 2024 at 05:34:53PM +0100, Marco Moock wrote:
> Am 21.01.2024 um 17:21:13 Uhr schrieb Geert Stappers privat:
>
> > It was a firmware thing.
>
> How did you solve it?
>
In the private[1] message was, besides 'Hello Marco':
} } Will reporting also to the ML
That report became ht
On 21/01/2024 23:33, Geert Stappers wrote:
The repair:
wget
http://deb.debian.org/debian/pool/non-free/f/firmware-nonfree/firmware-iwlwifi_20210315-3_all.deb
sudo dpkg -i firmware-iwlwifi_20210315-3_all.deb
https://www.debian.org/releases/bookworm/amd64/release-notes/ch-information.en.html#n
On Sun 21 Jan 2024 at 17:33:57 (+0100), Geert Stappers wrote:
> [7.854942] iwlwifi :02:00.0: reporting RF_KILL (radio disabled)
> [7.860452] iwlwifi :02:00.0: RF_KILL bit toggled to disable radio.
> [8.356275] iwlwifi :02:00.0 wlp2s0: renamed from wlan0
Run rfkill and, if i
Am 21.01.2024 um 17:21:13 Uhr schrieb Geert Stappers:
> It was a firmware thing.
How did you solve it?
On Sun, Jan 21, 2024 at 03:58:18PM +0100, Geert Stappers wrote:
>
> Hello,
>
>
>
> Here on a laptop does `ip link` see a WIFI device,
> but `nmcli device` does not.
>
> How to make NetworkManager aware of a WIFI device?
>
Have the firmware for WIFI card ins
Am 21.01.2024 um 16:36:09 Uhr schrieb Geert Stappers:
> Even better :-)
>
> It doesn't exist in /etc/network
Is system-networkd being used?
How did you configure it in the past?
On Sun, Jan 21, 2024 at 04:26:46PM +0100, Marco Moock wrote:
> Am 21.01.2024 um 15:58:18 Uhr schrieb Geert Stappers:
>
> > How to make NetworkManager aware of a WIFI device?
>
> Is the device commented out in /etc/network?
>
Even better :-)
It doesn't exist in /et
Am 21.01.2024 um 15:58:18 Uhr schrieb Geert Stappers:
> How to make NetworkManager aware of a WIFI device?
Is the device commented out in /etc/network?
Hello,
Here on a laptop does `ip link` see a WIFI device,
but `nmcli device` does not.
How to make NetworkManager aware of a WIFI device?
root@nero:~# ip --brief link show
lo UNKNOWN00:00:00:00:00:00
enp8s0 UP 04:7d:7b:d4:3d:68
Dear all,
I am having issues with my laptop wifi (Debian Bullseye). The connection comes
and goes making using internet impossible.I assumed a firmware problem, so I
tried several versions of the firmware-iwlwifi.deb package without
improvements.Specifically I tried the versions 20190114
Dear all,
I am having issues with my laptop wifi (Debian Bullseye). The connection comes
and goes making using internet impossible.I assumed a firmware problem, so I
tried several versions of the firmware-iwlwifi.deb package without
improvements.Specifically I tried the versions 20190114
On Mon, 27 Nov 2023, Hans wrote:
Hi folks,
just before I am trying forever:
Is it possible, to connect two hosts directly over wlan without using a
router?
Yes. It's called adhoc networking. No AP, no router, just two wifi cards
acting as a ptp link.
But I doubt you can do it other
> With an ethernet cable, this is easy (using a crossover ethernet cable), but
> how do this with wireless? Is this technically possible at all???
I think you want an ad-hoc wifi network. It is a peer to peer network
using Independent Basic Service Set (IBSS). See
<https://wiki.archli
Hans writes:
> Hi folks,
>
> hmm, looks like the only way is using a hotspot, either one as a vitual one
> using hostapd (or some similar software).
I don't know much about drones but even a cursory look seemed to
indicate some drones can act as wifi hotspots themselves?
On Mon, 2023-11-27 at 17:48 +0100, Hans wrote:
> Hi folks,
>
> hmm, looks like the only way is using a hotspot, either one as a vitual one
> using hostapd (or some similar software).
>
> But this is just what I wanted to avoid, as every software between
> streaming device and receiving device w
Hi folks,
hmm, looks like the only way is using a hotspot, either one as a vitual one
using hostapd (or some similar software).
But this is just what I wanted to avoid, as every software between streaming
device and receiving device will cause delays (which I also get when using a
router i.e.
Hans wrote:
> Is it possible, to connect two hosts directly over wlan without using a
> router?
Sometimes. The capability is called Ad-Hoc mode.
If you have two Linux machines with wifi NICs that support it,
you can do it.
If one of the hosts is a drone, it might not be capable o
t; You don't need a router for it; you can do it via an access point.
...and as others have said, you might set your laptop up as an access
point, so you possibly don't need extra hardware. Hostapd is the program
to do the magic [0]. As people have said here, you need your WiFi
adapter
the help of some priciples.
>
> With an ethernet cable, this is easy (using a crossover ethernet cable), but
> how do this with wireless? Is this technically possible at all???
>
> Thanks for any help.
>
> Best regards
>
> Hans
Probably there are a lot more knowledgea
iciples.
>
> With an ethernet cable, this is easy (using a crossover ethernet
> cable), but how do this with wireless? Is this technically possible
> at all???
>
>
Have a look at this: (your wifi adaptor must be capable of access point
mode, or you need to buy a dongle that is).
https://owlhowto.com/how-to-create-a-wifi-hotspot-on-debian-12/
Note: I've never done this.
--
Joe
On Mon, 2023-11-27 at 14:54 +0100, Hans wrote:
> Hi folks,
>
> just before I am trying forever:
>
> Is it possible, to connect two hosts directly over wlan without using a
> router?
You don't need a router for it; you can do it via an access point.
Something like a HP MSM430 or something from A
Hi folks,
just before I am trying forever:
Is it possible, to connect two hosts directly over wlan without using a
router?
The background: I want to stream video from my drone using RTMP to my
notebook.
This is already possible, when i am using a router. But in the fields, I got no
router a
On 08/11/2023 20:39, Martin wrote:
Here is output from phone connected to WiFi setup program:
Default gateway: 192.168.231.3
It seems dnsmasq is able to serve reasonable settings with minimal
configuration.
chain postrouting {
type nat hook postrouting priority
Martin writes:
> I just enabled it (again) now:
> root@redmoon:~# systemctl enable nftables.service
> Created symlink /etc/systemd/system/sysinit.target.wants/nftables.service →
> /lib/systemd/system/nftables.service.
> root@redmoon:~# systemctl status nftables.service
> ○ nftables.service - nft
Am 08.11.2023 um 11:04:54 Uhr schrieb William Torrez Corea:
> 06:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless
|A highly integrated, all CMOS combo-chip for 2.4 GHz 802.11n wireless
|local area networks (WLANs) and Bluetooth 4 solution for PC
|applications.
https://www.qual
cked), I
> guess, gateway is not explicitly configured, so the router tries to send
> packets to 192.168.231.1. Either change the interface IP or configure
> dnsmasq to send 192.168.231.3.
I think WiFi is configured properly (with automatic setup it does have same
settings as I did with
On Tue, Nov 7, 2023 at 10:16 PM William Torrez Corea
wrote:
>
> I have WiFi b/g/n (email, browser, streaming, social network) apparently but
> the device acts like WiFi 1 (email).
>
> Interface: 802.11 WiFi
> Driver: ath9k
> Speed: 60 Mb/s
> Security: WPA/WPA2
> RSSI
Am 07.11.2023 um 17:15:12 Uhr schrieb William Torrez Corea:
> I am using 2.4Ghz, but I can't use 5Ghz. My laptop is outdated
> (Inspiron 14R 5437).
Rund lspci and show the model name of the wireless NIC.
William Torrez Corea wrote:
> I have WiFi b/g/n (email, browser, streaming, social network) apparently
> but the device acts like WiFi 1 (email).
802.11b is a maximum of 12Mb/s.
802.11g is a maximum of 54Mb/s.
It is clear from this:
> *Interface*: 802.11 WiFi
> *Driver*: ath9k
&
On Sun, Nov 05, 2023 at 06:48:47AM +, Tixy wrote:
> On Sat, 2023-11-04 at 20:08 +0100, Martin wrote:
> [...]
> > BTW putting above script into /etc/nftables.conf (at the bottom of file)
> > did not ever worked - I had always to run that file manualy as root.
> > Command 'nft list ruleset' only
On Sun, Nov 05, 2023 at 10:26:17AM +0200, Anssi Saari wrote:
> Anyways, a typical masquerade rule would specify the source network and
> an outgoing interface. For example, I have in my Linux router:
>
> ip saddr 10.0.2.0/24 oifname "enp1s0" masquerade
>
> so for you that would become
>
> ip sad
t configured network interfaces for DHCP in
dnsmasq then do it. Otherwise other computers connected to the upstream
WiFi link may receive DHCP leases emitted from wlxe8de27a5ab1c.
Martin writes:
> #!/usr/sbin/nft -f
>
> table ip masqrule {}
> flush table ip masqrule
> table ip masqrule {
> chain postrouting {
> type nat hook postrouting priority srcnat; policy accept;
> ip saddr 192.168.231.3/24 ip daddr != 192.168.231.3/24 masquerade
> }
> }
>
> When I execute
On Sat, 2023-11-04 at 20:08 +0100, Martin wrote:
[...]
> BTW putting above script into /etc/nftables.conf (at the bottom of file)
> did not ever worked - I had always to run that file manualy as root.
> Command 'nft list ruleset' only then showed this table.
> I have no idea why. To me it seemed as
k configuration to DHCP.
Sorry for long pause in reply (my hard disk was dieing so I replaced HD and
installed whole debian from scratch).
Now (after reinstall everything) I am the point where I want to make my
router to work. I set up dnsmasq to enable DHCP with line in config:
dhcp-range=192.168.23
re-ath9k-htc
> sid (unstable) (misc): firmware for AR7010 and AR9271 USB wireless
> adapters
> 1.4.0-108-gd856466+dfsg1-1.4: all
This driver is also included inside of cdrom immage I use to start installation.
So I do not understand why it does not initiaze my wifi USB automatica
en use them for installing the packages.
>
> I have one computer with wifi connection to internet.
> The problem is to let installer recognize this wifi adapter.
>
> > > My wifi adapter is TP-LINK TL-WN722N
> >
> > Relevant is the USB-ID/PCI-ID.
> > Use ls
On Wed, Nov 01, 2023 at 02:09:57PM +0100, Marco M. wrote:
> Am 01.11.2023 um 13:59:51 Uhr schrieb Martin:
>
> Do you have USB NICs?
> Does your computer has an Ethernet NIC (wired)?
>
> Then use them for installing the packages.
I have one computer with wifi connection to int
Am 01.11.2023 um 13:59:51 Uhr schrieb Martin:
> The problem is that my wifi receiver is not recognized by installer.
Do you have USB NICs?
Does your computer has an Ethernet NIC (wired)?
Then use them for installing the packages.
> My wifi adapter is TP-LINK TL-WN722N
Relevant is the
Hello,
I am currently using Sid version of Debian - in /etc/apt/sources.list i have:
deb http://httpredir.debian.org/debian/ sid main contrib non-free
non-free-firmware
non-free and non-free-firmware I have because of drivers I need for my machine
(most acute is wifi receiver, but i guess for
On Sun, Oct 29, 2023 at 03:24:00PM +0530, Susmita/Rajib wrote:
Rajib,
Please note the change of subject.
> I have had a conversation with the Team ThinkPenguin for the wireless
> N model model. Their USB WiFi dongle is only for WiFi connectivity.
> Not for Bluetooth.
>
> The tea
and may switch mi
router from static network configuration to DHCP.
As a final note, NetworkManager allows to create "shared" connections
(ipv4.method). It starts dnsmasq and adds necessary firewall nat rules.
I used it in both directions: with ethernet upstream connection to share
On Thu, Oct 26, 2023 at 09:54:22AM +0700, Max Nikulin wrote:
> On 26/10/2023 02:20, Martin wrote:
> > On Wed, Oct 25, 2023 at 07:33:52PM +0700, Max Nikulin wrote:
> > > should have something like
> > >
> > > table ip sharedconnection {
> > >chain postrouting {
> > > type nat hook postrout
ad by either "nft -f FILE.conf" or just
executing it.
#!/usr/sbin/nft -f
table inet sharedconnection {}
flush table inet sharedconnection
# table ip shared connection { ... } from above
---
Upstream WiFi router does not know that packets addressed to
192.168.231.5 (mi router) should
On Wed 25 Oct 2023 at 11:04:59 (+0300), Anssi Saari wrote:
> Martin writes:
> > With wifi antena I receive a (rather weak) signal that connect my
> > computer to internet. I have to use windsurfer antena booster
> > (http://members.multiweb.nl/schaaijw/windsurfer_wifi_en.p
On Wed, Oct 25, 2023 at 02:15:36PM +0200, Marco M. wrote:
> Am 25.10.2023 um 13:33:48 Uhr schrieb Martin:
>
> > On Wed, Oct 25, 2023 at 08:47:03AM +0200, Marco M. wrote:
> > >
> > > Why don't you use DHCP like your phone does?
> >
> > Because I
On Wed, Oct 25, 2023 at 07:33:52PM +0700, Max Nikulin wrote:
> On 25/10/2023 18:24, Martin wrote:
> > On Wed, Oct 25, 2023 at 03:17:09PM +0700, Max Nikulin wrote:
> > >
> > > So packet forwarding should be enabled on the computer.
>
> sysctl net.ipv4.ip_forward
>
> almost certainly enabled since
On 25/10/2023 18:24, Martin wrote:
On Wed, Oct 25, 2023 at 03:17:09PM +0700, Max Nikulin wrote:
So packet forwarding should be enabled on the computer.
sysctl net.ipv4.ip_forward
almost certainly enabled since you have the docker0 network interface
However I suspect an issue with IP addres
Am 25.10.2023 um 13:33:48 Uhr schrieb Martin:
> On Wed, Oct 25, 2023 at 08:47:03AM +0200, Marco M. wrote:
> >
> > Why don't you use DHCP like your phone does?
>
> Because I used this computer before I had WiFi and phone.
Why it is a problem to change it?
Do yo
On Wed, Oct 25, 2023 at 08:47:03AM +0200, Marco M. wrote:
>
> Why don't you use DHCP like your phone does?
Because I used this computer before I had WiFi and phone.
> Show
> ip a
I posted output of that command to Max Nikulin email.
(Do not want to to post same info twi
On Wed, Oct 25, 2023 at 03:17:09PM +0700, Max Nikulin wrote:
> On 25/10/2023 15:04, Anssi Saari wrote:
> > You have some kind of mysterious internet connection from something.
> > That needs to connect to the router's WAN port.
>
> My guess is the following:
>
>
On 25/10/2023 15:04, Anssi Saari wrote:
You have some kind of mysterious internet connection from something.
That needs to connect to the router's WAN port.
My guess is the following:
- Source of weak WiFi
- WiFi booster
- WiFi adapter in computer
- ethernet port in computer
- ethernet
Martin writes:
> Hello,
>
> With wifi antena I receive a (rather weak) signal that connect my
> computer to internet. I have to use windsurfer antena booster
> (http://members.multiweb.nl/schaaijw/windsurfer_wifi_en.pdf)
> to get usable signal. So my computer have internet
Am 25.10.2023 um 08:45:26 Uhr schrieb Martin:
> I am using /etc/network and here is whole /etc/network/interfaces
> file:
>
> auto lo
> iface lo inet loopback
>
> auto enp3s0
> iface enp3s0 inet static
> address 192.168.231.3
> netmask 255.255.255.0
Why don't you use DHCP like your
e are also 2 middle ethernet cable sockets which i do not use
my guess is they are for connecting other devices -like desktop- to
subnetwork that wifi router uses which is 192.168.31.X - my phone is
geting adress from this subnetwork when connected to wifi router)
> Please also tell us if you
On Wed, Oct 25, 2023 at 06:52:09AM +0200, Geert Stappers wrote:
> On Wed, Oct 25, 2023 at 06:15:00AM +0200, Martin wrote:
> > I tried lot of setup and none worked.
>
> And also missed https://lists.debian.org/debian-user/2023/10/msg00684.html
> and https://lists.debian.org/debian-user/2023/10/msg0
1 - 100 of 1259 matches
Mail list logo
