I'm using an S3 Trio3D using the XFree86 3.3.5 FrameBuffer. I used
the frame buffer howto at:
http://www.uno.edu/~adamico/banshee/files/vesafb.txt
to set it. Key to remember is that you use the hex values for command
line booting, and decimal values in lilo.conf. I run at 1280 x 1024,
1
:: On Fri, 24 Mar 2000 00:19:08 +0200 (EET), Tolga KIlicli <[EMAIL PROTECTED]>
said:
I had that problem; you're probably running slink, right? So you
probaby have XFree86 version 3.3.2, or something like that. There's no
support for S3 Trio3D in that version of X, but you may up
Well XFree86 3.3.6 has support for the S3 Trio3D/2X under the SVGA server.
i have mine setup at an 800x600 display. you need to explicitly set the
video memory to 4096 or use the option SW_CURSOR to get a non white block
cursor..
james
On Fri, 24 Mar 2000, Tolga KIlicli wrote:
> I know it
> I know it is still the same problem for you but my card does not work even
> in 320x200 with 16 colors...
> I have tried framebuffer but it didnot work either...
>
> Do you know any driver or anything i could do with it?
I've helped someone on irc with this card recently. Basically, if you look
I know it is still the same problem for you but my card does not work even
in 320x200 with 16 colors...
I have tried framebuffer but it didnot work either...
Do you know any driver or anything i could do with it?
On 19 Jan 2000, David Z. Maze wrote:
> erasmo perez <[EMAIL PROTECTED]> writes:
> EP> more or less one week ago, i see in this lists the report of a S3
> EP> Trio3D video card that refuses to work in SVGA, just accepting VGA
> EP>
> EP> and now i face the same problem, is there some way to over
erasmo perez <[EMAIL PROTECTED]> writes:
EP> more or less one week ago, i see in this lists the report of a S3
EP> Trio3D video card that refuses to work in SVGA, just accepting VGA
EP>
EP> and now i face the same problem, is there some way to overcome this
EP> failure ?
I've had some luck using
hello
thanks for reading this email
more or less one week ago, i see in this lists the report of a S3
Trio3D video card that refuses to work in SVGA, just accepting VGA
and now i face the same problem, is there some way to overcome this
failure ?
the SuperProbe gives the following result
Leszek Gerwatowski wrote:
> And as always you have option of framebuffer device - wit this Xserver S3
> Trio3D works for sure but without full hardware acceleration. Just take a
> look at:
>
> http://www.debian.org/Lists-Archives/debian-user-9903/msg00324.html
>
> and answ
On Tue, Aug 03, 1999 at 10:54:08PM +0100, Nuno Emanuel F. Carvalho wrote:
> Leszek Gerwatowski wrote:
>
> > Just take a look at very new XFree86 3.3.4 - as I remember it has support
> > for S3 Trio3D. Just take server (SVGA or S3 or S3V?) from address:
> >
> > ftp
Leszek Gerwatowski wrote:
> Just take a look at very new XFree86 3.3.4 - as I remember it has support
> for S3 Trio3D. Just take server (SVGA or S3 or S3V?) from address:
>
> ftp://ftp.xfree86.org/pub/XFree86/3.3.4/binaries/Linux-ix86-glibc/Servers/
>
> and give it a chance.
S
A16 .
>
> As you could imagine I'm using that. Using 640x480 resolution with 16
> colors makes me remember the old days of my 386sx at 16MHz. :-)
>
Just take a look at very new XFree86 3.3.4 - as I remember it has support
for S3 Trio3D. Just take server (SVGA or S3 or S3V?) fr
Wim Kerkhoff wrote:
> I think that at one time (6 weeks ago?) I tried to get this card working for a
> friend, but I read the docs for the current (at the time) X versions, and that
> card was not supported. We swapped it with a Banshee 16MB, which worked fine.
Well I'll need to wait till have
Check this for info on supported cards for X 3.3.3:
http://www.xfree86.org/3.3.3/README3.html
or for 3.3.4:
http://www.xfree86.org/3.3.4/README3.html
I think that at one time (6 weeks ago?) I tried to get this card working for a
friend, but I read the docs for the current (at the time) X version
Hi,
I bougth recently a new computer with an S3Trio3D/2x graphic card:
Chip Type: S3LC2X
DAC Type: S3SDAC
Memory: 4MB
Unfortunally I only can get it to work with XF86_SVGA on 300x200
resolution! ;(
It doesn't work with the XF86_S3 accelerator server.
At XFree86 official site they say t
On Thu, Mar 04, 1999 at 10:57:34AM +1100, Corey Ralph wrote:
> Thanks for your help, I am going to set that up. I have the 2.2 kernel
> compiled and about to go, and I have downloaded the XF_FBDev. Next thing is
> how do I configure it? XF86Setup doesn't seem to have the FB listed in the
> drive
Corey Ralph wrote:
>
> Thanks for your help, I am going to set that up. I have the 2.2 kernel
> compiled and about to go, and I have downloaded the XF_FBDev. Next thing is
> how do I configure it? XF86Setup doesn't seem to have the FB listed in the
> drivers. Do I need to edit XF86Config manua
me an
example?
Cheers.
Corey
> -Original Message-
> From: Bernhard Dobbels [mailto:[EMAIL PROTECTED]
> Sent: Thursday, March 04, 1999 3:28 AM
> To: Corey Ralph
> Cc: debian-user@lists.debian.org
> Subject: Re: XFree with S3 Trio3D AGP?
>
>
> On Wed, 3 Mar 1999, Cor
On Wed, 3 Mar 1999, Corey Ralph wrote:
|I have been trying to get XFree86 to work with a Trio3d AGP card, and it
|doesn't seem to be supported.
indeed, it isn't
|Somebody sent me a link to an update for red hat to support it, but I would
|prefer to stick with Debian.
no, redhat doesn't support.
I have been trying to get XFree86 to work with a Trio3d AGP card, and it
doesn't seem to be supported.
Somebody sent me a link to an update for red hat to support it, but I would
prefer to stick with Debian.
I am using Debian 2.0 I have upgraded to the XFree86 from slink, and have
download the S3
20 matches
Mail list logo
