Re: NETDEV WATCHDOG: eth0: transmit timed out (was Re: Getting d-link DFE-530TX NIC working)

2004-01-29 Thread Emanoil Kotsev
I had recently the same problem I have a very old system and I had a find & grep over / so I forgot to exclude /dev as I did with /var/log and got some grep: /dev/kmem: Bad address grep: memory exhausted grep: memory exhausted after this I looked over the log files and found the message from the

Re: NETDEV WATCHDOG: eth0: transmit timed out (was Re: Getting d-link DFE-530TX NIC working)

2003-10-28 Thread kmark+debian
On Tue, 28 Oct 2003, ScruLoose wrote: > On Mon, Oct 27, 2003 at 10:06:18PM -0500, ScruLoose wrote: > > Hi all, > > Still pluggin' away at this problem with my D-Link DFE-530TX NIC. > > NETDEV WATCHDOG: eth0: transmit timed out > eth0: Transmit timed out, status , PHY status 786d, reset

NETDEV WATCHDOG: eth0: transmit timed out (was Re: Getting d-link DFE-530TX NIC working)

2003-10-28 Thread ScruLoose
On Mon, Oct 27, 2003 at 10:06:18PM -0500, ScruLoose wrote: > Hi all, Still pluggin' away at this problem with my D-Link DFE-530TX NIC. > But when I stick knoppix in, it happily accesses the network, and lsmod > shows via-rhine and mii modules (one shows as "used by" the other, but I > don't remem

Getting d-link DFE-530TX NIC working

2003-10-27 Thread ScruLoose
Hi all, I've got this machine with a D-Link DFE-530TX NIC in it, and a clean install of woody. (not much beyond the base system at this point). The thing is, Debian doesn't seem happy with the NIC. Under the standard installation process I chose the bf24 kernel, and it refused to configure the n