apshot in EC2 that I need to make it as volume and
>> mount it to copy some files from it. Unfortunately it is based on Debian
>> Jessie AMI (https://aws.amazon.com/marketplace/pp/prodview-5pgbnftzmrgec)
>> that cannot be subscribed to anymore thus making it impossible to mount the
>
ake it as volume and
> mount it to copy some files from it. Unfortunately it is based on Debian
> Jessie AMI (https://aws.amazon.com/marketplace/pp/prodview-5pgbnftzmrgec)
> that cannot be subscribed to anymore thus making it impossible to mount the
> volume. Are the some known workaroun
Hi!
I have a really old snapshot in EC2 that I need to make it as volume and
mount it to copy some files from it. Unfortunately it is based on Debian
Jessie AMI (https://aws.amazon.com/marketplace/pp/prodview-5pgbnftzmrgec)
that cannot be subscribed to anymore thus making it impossible to mount
On Thu, Jan 21, 2021 at 06:23:56PM -0600, David Wright wrote:
> Yes, that documents what we normally observe as a %eth0 or %1 suffix
> for IPv6 addresses which selects the interface to use. "Requires"
> (unemphasised in the original) mean that it is necessary to identify a
> particular zone, but IM
On Thu 21 Jan 2021 at 08:16:23 (+0100), Marc SCHAEFER wrote:
> On Thu, Jan 21, 2021 at 08:04:05AM +0100, Marc SCHAEFER wrote:
> > fe80::1 is specifically a link-local scope, a bit like if you try to
> > access a class variable without telling in what class it is.
>
> Reading RFC-4291 [1], 2.5.6 (l
On Thu, Jan 21, 2021 at 08:04:05AM +0100, Marc SCHAEFER wrote:
> fe80::1 is specifically a link-local scope, a bit like if you try to
> access a class variable without telling in what class it is.
Reading RFC-4291 [1], 2.5.6 (link-local addresses) and RFC-4007 [2] 6,
Zones Indices:
Because the
On Wed, Jan 20, 2021 at 11:59:46PM -0600, David Wright wrote:
> As far as the address is concerned, fe80::1 is perfectly formed,
> but ambiguous. Is that what your jessie error message used to say?
The error was one of the usual kernel errors (-EINVALID probably), see
below.
Actually, stretch doe
On Wed 20 Jan 2021 at 14:46:31 (+0100), Marc SCHAEFER wrote:
>
> I experiment [experienced] a change of behaviour between the kernel of Debian
> jessie
> and Debian buster.
>
> Namely, before, ping6 fe80::1 would fail, since it is ambiguous (fe80::1
> is a link scope,
Hello,
I experiment a change of behaviour between the kernel of Debian jessie
and Debian buster.
Namely, before, ping6 fe80::1 would fail, since it is ambiguous (fe80::1
is a link scope, thus a zone/interface scope ID is required).
With buster, it tries the first Ethernet interface, no error
Hi,
On Tue, 28 May 2019 19:51:06 +
Frederic Robert wrote:
(...)
> if i reboot to the kernel 3.16.0-8 the system is working. With 3.16.0-9
> the display is broken and the computer often freezes
maybe there is a newly introduced bug with your video driver?
I think the best thing to do is to
On 5/28/19 7:39 PM, Frederic Robert wrote:
Hello,
How are you? today i installed security fixes and the kernel 3.16.0-9
was installed. When i reboot my computer, the system was broken. Is
there a problem with this kernel?
Greetings,
if i reboot to the kernel 3.16.0-8 the system is working
Hello,
How are you? today i installed security fixes and the kernel 3.16.0-9
was installed. When i reboot my computer, the system was broken. Is
there a problem with this kernel?
Greetings,
--
Frédéric Robert
On 15/01/19 12:24 PM, Dan Ritter wrote:
> USB for backups: the hard drive is dead. Get a new one. Test it.
I had one that appeared to die (WD 1TB IIRC) - I cut it open, and the
sata drive inside works fine, it was just the usb interface that had died.
Richard
signature.asc
Description: OpenPG
James H. H. Lampert wrote:
> Ladies and Gentlemen:
>
> We've got a Debian 8 box (an old Dell 400SC) that won't launch X (it boots
> to a command line) or Tomcat, nor mount a USB hard drive that we use for
> backups.
>
> It will, however, accept ssh connections.
>
> In the boot sequence, I see "
Ladies and Gentlemen:
We've got a Debian 8 box (an old Dell 400SC) that won't launch X (it
boots to a command line) or Tomcat, nor mount a USB hard drive that we
use for backups.
It will, however, accept ssh connections.
In the boot sequence, I see "Failed" where it tries to mount the USB
d
On Tue, Dec 18, 2018 at 11:12:00PM +0100, deloptes wrote:
> James H. H. Lampert wrote:
>
> >> The following packages have unmet dependencies:
> >> openjdk-8-jdk : Depends: openjdk-8-jre (= 8u171-b11-1~bpo8+1) but it is
> >> not going to be installed Depends: openjdk-8-jdk-headless (=
> >> 8u171-b1
James H. H. Lampert wrote:
>> The following packages have unmet dependencies:
>> openjdk-8-jdk : Depends: openjdk-8-jre (= 8u171-b11-1~bpo8+1) but it is
>> not going to be installed Depends: openjdk-8-jdk-headless (=
>> 8u171-b11-1~bpo8+1) but it is not going to be installed E: Unable to
>> correc
On Tue, Dec 18, 2018 at 10:16:25AM -0800, James H. H. Lampert wrote:
> I'm endeavoring to get Java 8 onto our development instance, so that the
> Tomcat environment there matches that of our cluster nodes, and apg-get is
> not cooperating.
>
> This particular instance is a Bitnami SVN/Trac server,
I'm endeavoring to get Java 8 onto our development instance, so that the
Tomcat environment there matches that of our cluster nodes, and apg-get
is not cooperating.
This particular instance is a Bitnami SVN/Trac server, with Tomcat 8
added to it, and running independently of the Apache server
BASSAGET Cédric wrote:
> Can not install 2.23.08-3 because it needs libpng16-16
This refers to Buster https://packages.debian.org/testing/web/webalizer
either look for backport or recompile source on jessie
Hello,
Referring to : https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=858602
I'm looking for the 2.23.08-2 version of webalizer, which is referred in
this bug. Can't find it...
Can not install 2.23.08-3 because it needs libpng16-16 which is not
available in debian jessie reposito
Hello there,
debian is the best - when it works :-) Maybe someone of you will have an
idea. I've run into an issue with time synchronisation on windows 7
clients in a samba 4 ad domain. Setup is as follows:
Server is running debian jessie with samba 4 as PDC and NTPd. I followed
the tut
On 11/29/2017 08:42 AM, Frederic Robert wrote:
> Hello,
>
> How are you? i don't find libapache2-mod-speedycgi in jessie. Only for
> Wheezy. What is this name in Jessie?
>
> Thank you for your help,
>
It was removed after wheezy, it seems. See:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug
Hello,
How are you? i don't find libapache2-mod-speedycgi in jessie. Only for Wheezy.
What is this name in Jessie?
Thank you for your help,
--
Frederic Robert
Hi, Alex.
On 29/09/17 07:19, Alex ARNAUD wrote:
In the last DSA for the chromium-browser package (DSA-3985-1) I noticed
that the updates were released for stable, testing and unstable but not
for oldstable. I think the same thing happened with the previous
update.
Ma
Le 28/09/2017 à 19:39, Daniel Bareiro a écrit :
Hi, Sven.
On 28/09/17 14:13, Sven Joachim wrote:
In the last DSA for the chromium-browser package (DSA-3985-1) I noticed
that the updates were released for stable, testing and unstable but not
for oldstable. I think the same thing happened with t
Hi, Sven.
On 28/09/17 14:13, Sven Joachim wrote:
>> In the last DSA for the chromium-browser package (DSA-3985-1) I noticed
>> that the updates were released for stable, testing and unstable but not
>> for oldstable. I think the same thing happened with the previous update.
>>
>> Maybe I'm missin
On 2017-09-28 11:08 -0300, Daniel Bareiro wrote:
> In the last DSA for the chromium-browser package (DSA-3985-1) I noticed
> that the updates were released for stable, testing and unstable but not
> for oldstable. I think the same thing happened with the previous update.
>
> Maybe I'm missing some
Hi all!
In the last DSA for the chromium-browser package (DSA-3985-1) I noticed
that the updates were released for stable, testing and unstable but not
for oldstable. I think the same thing happened with the previous update.
Maybe I'm missing something and Chromium on Jessie is no longer getting
(there was a problem with my subscription to the list, I am not sure
that my previous mail went through, copy/pasting it again just in case -
sorry for the spam if you received it twice)
Hello,
On 2017-06-07 06:11, Andy Smith wrote:
> On Wed, May 10, 2017 at 11:41:30PM +, commentsab...@riseup
Hello,
On Wed, May 10, 2017 at 11:41:30PM +, commentsab...@riseup.net wrote:
> I'm a complete noob when it comes to this kind of operations, so, sorry for
> the dumb question : following tv.debian@'s advises, I purchased a cheap SSD
> and installed my system on it (the SSD, and one pair of HDD
Hello,
Giving this thread a UP, would anyone be able to help me?
On 2017-05-10 23:41, commentsab...@riseup.net wrote:
> I'm a complete noob when it comes to this kind of operations, so,
> sorry for the dumb question : following tv.debian@'s advises, I
> purchased a cheap SSD and installed my syst
Hello,
On 2017-04-19 09:11, tv.deb...@googlemail.com wrote:
System on usb flash disks always caused me troubles, I use it only if
the system can be loaded in ram at boot time and the drive isn't used
for write operation. A low-end small SSD would be a far better option
in my opinion.
Thanks fo
On 04/18/2017 07:06 PM, commentsab...@riseup.net wrote:
Is there an easy way to attach several pair of RAID1 disks (with full
disk encryption) to a Debian Jessie system?
Here is a picture of what I'm trying to achieve: http://imgur.com/vF7IqX2
I am building a home backup system, I
v.deb...@googlemail.com <
tv.deb...@googlemail.com> wrote:
> On 19/04/2017 05:06, commentsab...@riseup.net wrote:
>
>> Hello,
>>
>> Is there an easy way to attach several pair of RAID1 disks (with full
>> disk encryption) to a Debian Jessie system?
>>
>
On 19/04/2017 05:06, commentsab...@riseup.net wrote:
Hello,
Is there an easy way to attach several pair of RAID1 disks (with full
disk encryption) to a Debian Jessie system?
Here is a picture of what I'm trying to achieve: http://imgur.com/vF7IqX2
I am building a home backup system, I
Hello,
Is there an easy way to attach several pair of RAID1 disks (with full
disk encryption) to a Debian Jessie system?
Here is a picture of what I'm trying to achieve:
http://imgur.com/vF7IqX2
I am building a home backup system, I have different type of data to
backup (work, f
On Wed, Mar 01, 2017 at 01:42:52PM +0800, s0lid wrote:
> Hi list,
>
> I recently installed asterisk by doing apt-get. I noticed that the
> app_meetme.so is not part of this package. Is there a way to install
> asterisk with app_meetme without compiling from source?
MeetMe has been replaced by Con
Hi list,
I recently installed asterisk by doing apt-get. I noticed that the
app_meetme.so is not part of this package. Is there a way to install
asterisk with app_meetme without compiling from source?
On 02/06/2017 09:25 PM, Unman wrote:
On Mon, Feb 06, 2017 at 01:19:00PM +, Patrick Schleizer wrote:
The unattended-upgrades was not installed on my Debian jessie system.
After upgrading to Debian stretch, the package unattended-upgrades got
installed. 'reverse-depends unattended-upg
17 at 13:19:00 +, Patrick Schleizer wrote:
> >> >> > The unattended-upgrades was not installed on my Debian jessie
> >> >> > system. After upgrading to Debian stretch, the package
> >> >> > unattended-upgrades got installed. 'reverse-d
Lisi Reisz writes:
> On Monday 06 February 2017 18:24:38 Mart van de Wege wrote:
>> Lisi Reisz writes:
>> > On Monday 06 February 2017 13:54:11 Brian wrote:
>> >> On Mon 06 Feb 2017 at 13:19:00 +, Patrick Schleizer wrote:
>> >> > The unattended-u
On Tue, Feb 07, 2017 at 02:25:12AM +, Unman wrote:
> On Mon, Feb 06, 2017 at 01:19:00PM +, Patrick Schleizer wrote:
> > The unattended-upgrades was not installed on my Debian jessie system.
> > After upgrading to Debian stretch, the package unattended-upgrades got
> >
On Mon, Feb 06, 2017 at 01:19:00PM +, Patrick Schleizer wrote:
> The unattended-upgrades was not installed on my Debian jessie system.
> After upgrading to Debian stretch, the package unattended-upgrades got
> installed. 'reverse-depends unattended-upgrades' [1] did not
On Monday 06 February 2017 18:24:38 Mart van de Wege wrote:
> Lisi Reisz writes:
> > On Monday 06 February 2017 13:54:11 Brian wrote:
> >> On Mon 06 Feb 2017 at 13:19:00 +, Patrick Schleizer wrote:
> >> > The unattended-upgrades was not installed on my Debi
On Mon, Feb 06, 2017 at 07:24:38PM +0100, Mart van de Wege wrote:
>
> I agree with the developers' sentiment that automatic upgrades are a
> good thing, but I really think Debian could have cooked up a better
> script than !@#$% 'unattended-upgrades'.
>
Standard open source software response app
Lisi Reisz writes:
> On Monday 06 February 2017 13:54:11 Brian wrote:
>> On Mon 06 Feb 2017 at 13:19:00 +, Patrick Schleizer wrote:
>> > The unattended-upgrades was not installed on my Debian jessie system.
>> > After upgrading to Debian stretch, the pack
at 13:19:00 +, Patrick Schleizer wrote:
> > > > > The unattended-upgrades was not installed on my Debian jessie
> > > > > system. After upgrading to Debian stretch, the package
> > > > > unattended-upgrades got installed. 'reverse-depends
>
On Monday 06 February 2017 16:55:25 Joe wrote:
> On Mon, 6 Feb 2017 16:30:36 +
>
> Lisi Reisz wrote:
> > On Monday 06 February 2017 13:54:11 Brian wrote:
> > > On Mon 06 Feb 2017 at 13:19:00 +, Patrick Schleizer wrote:
> > > > The unattended-upgrades w
On Mon, 6 Feb 2017 16:30:36 +
Lisi Reisz wrote:
> On Monday 06 February 2017 13:54:11 Brian wrote:
> > On Mon 06 Feb 2017 at 13:19:00 +, Patrick Schleizer wrote:
> > > The unattended-upgrades was not installed on my Debian jessie
> > > system. After upgra
On Monday 06 February 2017 13:54:11 Brian wrote:
> On Mon 06 Feb 2017 at 13:19:00 +, Patrick Schleizer wrote:
> > The unattended-upgrades was not installed on my Debian jessie system.
> > After upgrading to Debian stretch, the package unattended-upgrades got
> > instal
On Mon 06 Feb 2017 at 13:19:00 +, Patrick Schleizer wrote:
> The unattended-upgrades was not installed on my Debian jessie system.
> After upgrading to Debian stretch, the package unattended-upgrades got
> installed. 'reverse-depends unattended-upgrades' [1] did not make me
The unattended-upgrades was not installed on my Debian jessie system.
After upgrading to Debian stretch, the package unattended-upgrades got
installed. 'reverse-depends unattended-upgrades' [1] did not make me any
wiser. There must be a gap of my apt knowledge. Can anyone shed light on
t
its possible.
>
If your trouble has to do with i386/Jessie/wifi, I can assure you that it
does work. It's on my GoBook laptop (i686 with the i386 Debian Jessie
release) running XFCE4 with the WICD net manager. It switches happily
between Ethernet and wifi.
Sorta -- I need to fix up the ro
On Thu, Feb 02, 2017 at 09:15:32PM -0700, Billy O wrote:
> So i have been looking around and reading for while now as far as
> connecting to a wifi network what might i be missing in this area i am on a
> dell i386 also what would i need to know about drag and drop to desktop
> options if its possi
So i have been looking around and reading for while now as far as
connecting to a wifi network what might i be missing in this area i am on a
dell i386 also what would i need to know about drag and drop to desktop
options if its possible.
Thanks for the time reading this email
Hi,
On Mon, 05 Dec 2016 09:16:23 +0100
"Thomas Schmitt" wrote:
> Hi,
>
> terryc wrote:
> > Unfortuantely, all that both machines have is Xfburn, which it gives
> > you an option of creating an ISO, it only does so if the burner is in
> > that machine. Major bummer.
>
(...)
> Did you already tr
On Mon, Dec 05, 2016 at 09:46:55AM +, Brian wrote:
> genisoimage -o out.iso file1 file2 .
I'd echo this, use genisoimage, but read the man page first, you will almost
certainly want to also use the -J and -r arguments too.
--
Jonathan Dowland
Please do not CC me, I am subscribed to the l
On Mon 05 Dec 2016 at 17:03:27 +1100, terryc wrote:
> I need a prog to create an ISO image of files to transfer to a second
> machine for burning, but I've suddenly found that my rich collection of
> tools is noew depreciated and D'd in Debian Jessie.
>
> Unfortuantel
Hi,
terryc wrote:
> Unfortuantely, all that both machines have is Xfburn, which it gives
> you an option of creating an ISO, it only does so if the burner is in
> that machine. Major bummer.
Sounds like an unfortunate design.
I have on my todo list to test CDEmu ( http://cdemu.sourceforge.net/ )
I need a prog to create an ISO image of files to transfer to a second
machine for burning, but I've suddenly found that my rich collection of
tools is noew depreciated and D'd in Debian Jessie.
Unfortuantely, all that both machines have is Xfburn, which it gives
you an option of creat
Yeah the card I was referring to was just a simple microSD card like what you
would put in your camera. I was running a normal install of debian without any
kind of "live" or ram disk setup. Not ideal for flash without wear leveling
On December 3, 2016 7:59:48 AM EST, Jochen Spieker
wrote:
>d
Richard Owlett:
> On 12/3/2016 7:05 AM, Jochen Spieker wrote:
>>
>> https://forums.lenovo.com/t5/ThinkPad-T61-and-prior-T-series/Boot-T61p-from-SD-card/m-p/261121/highlight/true#M41072
>> looks like you are out of luck.
>>
>
> Maybe. May be not. I suspect most of what I was thinking of by having
Pascal Hambourg:
> Le 03/12/2016 à 13:59, Jochen Spieker a écrit :
>>
>> CF cards were much more clever from the beginning compared to cheaper
>> alternatives (like SSD or MMC cards). I would expect them to have better
>> wear levelling than a common SD card.
>
> I would be surprised that a CF ca
On 12/02/16 10:07, Richard Owlett wrote:
I have a well used Lenovo R61 Thinkpad whose sole raison d'etre is to
serve as a test platform for experiments which may spectacularly fail.
To quote a product description, it has:
Card Reader
4 in 1 card reader
Supported Flash Memory
Memory
On 12/3/2016 7:05 AM, Jochen Spieker wrote:
Richard Owlett:
On 12/2/2016 4:21 PM, Jochen Spieker wrote:
Beware that this might slightly increase power usage / reduce battery
life. That's at least my observation from a couple of years ago.
Depenging on the hardware, an SD card can keep a bus al
Le 03/12/2016 à 13:59, Jochen Spieker a écrit :
deloptes:
Steven Mainor wrote:
I don't know if this helps answer #3 or not. I have ran Debian from a
microSD flash card before but the card reader was attached via USB.
It didn't last very long before the flash card degraded. I think running
an
Richard Owlett:
> On 12/2/2016 4:21 PM, Jochen Spieker wrote:
>>
>> Beware that this might slightly increase power usage / reduce battery
>> life. That's at least my observation from a couple of years ago.
>> Depenging on the hardware, an SD card can keep a bus alive that could be
>> put to sleep
deloptes:
> Steven Mainor wrote:
>
>> I don't know if this helps answer #3 or not. I have ran Debian from a
>> microSD flash card before but the card reader was attached via USB.
>>
>> It didn't last very long before the flash card degraded. I think running
>> an operating system on flash used up
On 12/3/2016 3:33 AM, Curt wrote:
On 2016-12-03, deloptes wrote:
Steven Mainor wrote:
I don't know if this helps answer #3 or not. I have ran Debian from a
microSD flash card before but the card reader was attached via USB.
It didn't last very long before the flash card degraded. I think run
On 2016-12-03, deloptes wrote:
> Steven Mainor wrote:
>
>> I don't know if this helps answer #3 or not. I have ran Debian from a
>> microSD flash card before but the card reader was attached via USB.
>>
>> It didn't last very long before the flash card degraded. I think running
>> an operating sy
Le 02/12/2016 à 23:48, Steven Mainor a écrit :
I don't know if this helps answer #3 or not. I have ran Debian from a
microSD flash card before but the card reader was attached via USB.
It didn't last very long before the flash card degraded. I think running
an operating system on flash used up t
Steven Mainor wrote:
> I don't know if this helps answer #3 or not. I have ran Debian from a
> microSD flash card before but the card reader was attached via USB.
>
> It didn't last very long before the flash card degraded. I think running
> an operating system on flash used up the read/write cyc
On 12/2/2016 4:48 PM, Steven Mainor wrote:
I don't know if this helps answer #3 or not. I have ran Debian from a
microSD flash card before but the card reader was attached via USB.
It didn't last very long before the flash card degraded. I think running
an operating system on flash used up the r
On 12/2/2016 4:21 PM, Jochen Spieker wrote:
Richard Owlett:
I have a well used Lenovo R61 Thinkpad whose sole raison d'etre is to serve
as a test platform for experiments which may spectacularly fail.
To quote a product description, it has:
Card Reader
4 in 1 card reader
Supported
I don't know if this helps answer #3 or not. I have ran Debian from a
microSD flash card before but the card reader was attached via USB.
It didn't last very long before the flash card degraded. I think running
an operating system on flash used up the read/write cycles too quickly.
I eventually d
Richard Owlett:
> I have a well used Lenovo R61 Thinkpad whose sole raison d'etre is to serve
> as a test platform for experiments which may spectacularly fail.
>
> To quote a product description, it has:
> Card Reader
> 4 in 1 card reader
> Supported Flash Memory
> Memory Stick PRO,
I have a well used Lenovo R61 Thinkpad whose sole raison d'etre
is to serve as a test platform for experiments which may
spectacularly fail.
To quote a product description, it has:
Card Reader
4 in 1 card reader
Supported Flash Memory
Memory Stick PRO, MultiMediaCard, SD Memory Ca
Try pg_lsclusters to see which postgresql servers are running and listening
on which ports.
Regards
Johann
--
Because experiencing your loyal love is better than life itself,
my lips will praise you. (Psalm 63:3)
Hi all
I am trying to setup a postgresql 9.4 database on Debian Jessie. It
worked well on testing with postgresql 9.6 from the repos and then I
already could connect with
$ sudo -u postgres psql
I would like to use Jessie but when I try the same on stable with
postgresql 9.4, this is what I get
l
> 4.0.2
That version is the version in backports.
> Can You Please Help Us How To Install Kicad 4.0.4 In Debian Jessie 8.5 We
> Are Try To Build And We Try Using PPA But It Install Only Kicad 4.0.2
The term "PPA" is a Ubuntu-originated term, and is therefore not Debian.
On 16/11/16 17:10, Paul Wise wrote:
On Wed, Nov 16, 2016 at 11:24 AM, ARAVIND B KUMAR
wrote:
We Are Try To Install Kicad 4.0.4 In Debain Jessie 8.5 But It Only Install
4.0.2 Can You Please Help Us How To Install Kicad 4.0.4 In Debian Jessie 8.5
We Are Try To Build And We Try Using PPA But It
On Wed, Nov 16, 2016 at 11:24 AM, ARAVIND B KUMAR
wrote:
> We Are Try To Install Kicad 4.0.4 In Debain Jessie 8.5 But It Only Install
> 4.0.2 Can You Please Help Us How To Install Kicad 4.0.4 In Debian Jessie 8.5
> We Are Try To Build And We Try Using PPA But It Install Only Kicad 4.0.
Hello Sir
This Is Aravind From India
We Are Try To Install Kicad 4.0.4 In Debain Jessie 8.5 But It Only Install
4.0.2 Can You Please Help Us How To Install Kicad 4.0.4 In Debian Jessie
8.5 We Are Try To Build And We Try Using PPA But It Install Only Kicad 4.0.2
We Are Looking Forward From You
in my case 2 seconds were not enough - had to increase to 5 on one
machine and to 10 on another (slower) one.
is this issue fixed in stretch/sid?
Hello, I just added a "non-free" component to /etc/apt/sources.list, the
APT "deb http://http.us.debian.org/debian/ testing main non-free" and then
installed the "firmware-atheros" package.
Thank you,
Best
2016-10-07 13:29 GMT-06:00 deloptes :
> juan hernandez wrote:
>
> > Hello:
> > I'm using D
Hi Team,
For Debian Jessie 8.4 on XenServer having 10 or more CPUS crash while under
stress and VM’s will never boot having 4 interface combination of 10 CPUS or
more.
I suspect crash thing has been fixed in 8.6 (which I am still testing) any
workaround || cause
Thoughts for the same will
juan hernandez wrote:
> Hello:
> I'm using Debian in a Lenovo but I'm unable to using with bluetooth. Any
> advice?
> Thank you in advance
>
> best.
What does it mean you are unable of using bluetooth?
What have you tried? do you have some logs?
Have you tried bluetoothctl and rfkill?
Is your bl
Hello:
I'm using Debian in a Lenovo but I'm unable to using with bluetooth. Any
advice?
Thank you in advance
best.
rhkra...@gmail.com composed on 2016-09-15 07:28 (UTC-0400):
... my only reason for writing is to suggest (to the OP) that he consider
using a fairly inexpensive digital flat screen tv as his monitor. I currently
use a 1080P 32" T that I bought for under $200 (on sale, somewhere, sometime,
prob
Good Morning.
I work to daily with linux debian jessie 8.1
Two days ago i updated my computer and suddenly the access to share folders
with cifs has stopped working.
I have installed and uninstalled samba and packages associated and I havent
been able to connect to remote server by to share
On Thu 15 Sep 2016 at 07:28:16 (-0400), rhkra...@gmail.com wrote:
> TL;DR (Too Long, Didn't Read)--I didn't anticipate ever using that little
> abbreviation.
>
> Anyway, my only reason for writing is to suggest (to the OP) that he consider
> using a fairly inexpensive digital flat screen tv as h
On Thu 15 Sep 2016 at 05:11:26 (-0400), Felix Miata wrote:
> David Wright composed on 2016-09-14 22:59 (UTC-0500):
>
> >On Wed 14 Sep 2016 at 05:43:24 (-0400), Felix Miata wrote:
>
> >>David Wright composed on 2016-09-13 13:36 (UTC-0500):
>
> >The person to complain to about not being able to *r
TL;DR (Too Long, Didn't Read)--I didn't anticipate ever using that little
abbreviation.
Anyway, my only reason for writing is to suggest (to the OP) that he consider
using a fairly inexpensive digital flat screen tv as his monitor. I currently
use a 1080P 32" T that I bought for under $200 (on
David Wright composed on 2016-09-14 22:59 (UTC-0500):
On Wed 14 Sep 2016 at 05:43:24 (-0400), Felix Miata wrote:
David Wright composed on 2016-09-13 13:36 (UTC-0500):
The person to complain to about not being able to *read* small fonts is
your optician.
Thats presumptuous. There's only s
On Wed 14 Sep 2016 at 11:09:47 (-0400), Ric Moore wrote:
> On 09/13/2016 02:36 PM, David Wright wrote:
>
> >When I want to change resolution, which keys should I press to do that?
>
> Back in the day, when xorg.conf roamed free, you could have multiple
> screen resolutions noted within it and a c
On Wed 14 Sep 2016 at 05:43:24 (-0400), Felix Miata wrote:
> David Wright composed on 2016-09-13 13:36 (UTC-0500):
>
> Rather curious to see a regular participant here with a .co.uk
> mailing address apparently in a university environment in a UTC-0500
> time zone. Curiosity makes it for me a recu
On 09/13/2016 02:36 PM, David Wright wrote:
When I want to change resolution, which keys should I press to do that?
Back in the day, when xorg.conf roamed free, you could have multiple
screen resolutions noted within it and a ctrl-alt-+ would switch
resolutions on the fly. That worked on CRT
David Wright composed on 2016-09-13 13:36 (UTC-0500):
Rather curious to see a regular participant here with a .co.uk mailing
address apparently in a university environment in a UTC-0500 time zone.
Curiosity makes it for me a recurring distraction, wondering just what part
of the world this mig
On Thu 08 Sep 2016 at 12:53:49 (-0400), Felix Miata wrote:
> David Wright composed on 2016-09-08 09:08 (UTC-0500):
>
> >On Thu 08 Sep 2016 at 04:36:42 (-0400), Felix Miata wrote:
>
> >>Nicolas George composed on 2016-09-08 10:07 (UTC+0200):
>
> >>>Felix Miata composed:
>
> The simplest way
1 - 100 of 446 matches
Mail list logo
