is so uncommon.
(Anonymous)
On 8/19/24 10:36, Philippe Clérié wrote:
I just had a similar issue yesterday with an HP Office Pro 7740. I ended
up installing using the socket (port 9100) interface.
...
Philippe
--
The trouble with common sense is that it is so uncommon.
(Anonymous)
On 8/1
I just had a similar issue yesterday with an HP Office Pro 7740. I ended
up installing using the socket (port 9100) interface.
...
Philippe
--
The trouble with common sense is that it is so uncommon.
(Anonymous)
On 8/18/24 12:44, sentini...@virgilio.it wrote:
New installation of Debian, on
On 06/29/2018 04:04 PM, Joe wrote:
I've just spent half an afternoon trying first roundcube then prayer.
You probably skipped a couple of steps there. Before prayer, I usually
go through head banging, hair pulling, troubleshooting, not to mention
copious swearing, then maybe some sleep. The s
On 02/17/2017 02:05 PM, Per Qvindesland wrote:
Hi All
Is there is an official way of installing freeipa-client on 7.11? judging from
https://packages.qa.debian.org/f/freeipa.html then it looks like there is
packages available, but I must admit I have no idea how to add that into
/etc/apt/sour
On 04/14/2016 08:38 PM, John Hasler wrote:
Philippe Clérié wrtes:
I thought it somewhat strange since I believe IPv6 essentially removes
the need for VPN.
How?
Well, it's just the way IPv6 works.
By now, I suspect most IPv4 networks use private addresses, i.e.
10.0.0.0/8, 172.16.0
This morning, on my Planet Debian feed, I saw a post from someone using
OpenVPN on IPv6. I thought it somewhat strange since I believe IPv6
essentially removes the need for VPN. So what might be a use case for
VPN over IPv6?
--
Philippe
--
The trouble with common sense it that it is so u
On 11/11/15 16:00, Michael Biebl wrote:
Am 10.11.2015 um 02:37 schrieb Philippe Clérié:
I just caught the YouTube video of Michael Biebl's presentation at
systemd.conf. It was good and informative and reminded me of the hard
and many faceted work Debian developers and maintainers put in.
I just caught the YouTube video of Michael Biebl's presentation at
systemd.conf. It was good and informative and reminded me of the hard
and many faceted work Debian developers and maintainers put in. Work for
which I don't often enough show my appreciation. It's very comforting to
know that th
On 10/26/2015 01:09 PM, Michael Biebl wrote:
Am 26.10.2015 um 17:13 schrieb Philippe Clérié:
On 10/25/2015 01:52 PM, Michael Biebl wrote:
Am 25.10.2015 um 12:59 schrieb Philippe Clérié:
On 10/23/2015 05:33 PM, Philippe Clérié wrote:
I'm running raspbian jessy on a rpi2 with an Adafrui
On 10/25/2015 01:52 PM, Michael Biebl wrote:
Am 25.10.2015 um 12:59 schrieb Philippe Clérié:
On 10/23/2015 05:33 PM, Philippe Clérié wrote:
I'm running raspbian jessy on a rpi2 with an Adafruit GPS board. Gpsd
refuses to load on boot, but works just fine on manual start.
I am not yet fam
On 10/23/2015 05:33 PM, Philippe Clérié wrote:
I'm running raspbian jessy on a rpi2 with an Adafruit GPS board. Gpsd
refuses to load on boot, but works just fine on manual start.
I am not yet familiar with systemd. Even if I've had to dig a bit to try
to understand how it works
I'm running raspbian jessy on a rpi2 with an Adafruit GPS board. Gpsd
refuses to load on boot, but works just fine on manual start.
I am not yet familiar with systemd. Even if I've had to dig a bit to try
to understand how it works I'm still stumped at the moment, so I don't
know if there's a
.
On May 27, 2015 3:21 PM, Bob Proulx wrote:
>
> Philippe Clérié wrote:
> > So far I have not seen any trace of an attempt by the DHCPv6 server to
> > update the DNS.
> >
> > Thanks in advance for any suggestion...
>
> Does the dhcp *server* update d
Hello,
For the past couple of days I've been trying to set up isc-dhcp-server
on jessie for IPv6. I am at a point where the server is providing
addresses but I cannot get it to update the DNS server.
Both servers are on the same machine. The DNS server is bind9 and is
working correctly for b
On 07/05/15 12:27, Philippe Clérié wrote:
Just being cautious. I was just beginning a dist-upgrade and aptitude
update gave me this:
Hit http://spritelink.github.io stable Release.gpg
Hit http://spritelink.github.io stable Release
Hit http://spritelink.github.io stable/main armel Packages
Hit
Just being cautious. I was just beginning a dist-upgrade and aptitude
update gave me this:
Hit http://spritelink.github.io stable Release.gpg
Hit http://spritelink.github.io stable Release
Hit http://spritelink.github.io stable/main armel Packages
Hit http://spritelink.github.io stable/extra arm
On 02/28/2015 03:50 PM, Brian wrote:
On Sat 28 Feb 2015 at 15:11:31 -0500, Philippe Clérié wrote:
What is the rationale for the /etc/hosts entry for 127.0.1.1?
You can start with
https://lists.debian.org/debian-devel/2013/07/msg00809.html
and then work backwards in time.
It tends to
What is the rationale for the /etc/hosts entry for 127.0.1.1?
It tends to be annoying when using dnsmasq as a server for static hosts.
--
Philippe
--
The trouble with common sense it that it is so uncommon.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject
On 10/08/2014 10:04 PM, Joey Hess wrote:
Philippe Clérié wrote:
I'm curious to know how fast obnam is for other users.
My home network is mostly Gigabit Ethernet. Measuring with iperf, the best
speed I get is around 600Mbps, maybe 700Mbps depending on the computers
involved.
With
I'm curious to know how fast obnam is for other users.
My home network is mostly Gigabit Ethernet. Measuring with iperf, the
best speed I get is around 600Mbps, maybe 700Mbps depending on the
computers involved.
With obnam, speeds are anywhere below 50Mbps. Even with no other traffic
on the
On 10/01/2014 04:55 AM, Andrei POPESCU wrote:
On Lu, 29 sep 14, 12:48:58, Philippe Clérié wrote:
It appears that the Debian installer _does not_ have a Keymap variant
selection dialog, even in expert mode. Even dpkg-reconfigure
keyboard-configuration does not seem to do anything, while in
On 09/27/2014 01:27 PM, Lisi Reisz wrote:
On Saturday 27 September 2014 17:57:06 Philippe Clérié wrote:
Thanks for the tips.
Bug filed as #763072.
--
Philippe
--
The trouble with common sense it that it is so uncommon.
I have looked at the bug report, and I would suggest that it may
Thanks for the tips.
Bug filed as #763072.
--
Philippe
--
The trouble with common sense it that it is so uncommon.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debia
On 09/27/2014 07:17 AM, lee wrote:
Hm, you don't use UPSs?
:-)
It's a long story. I'll make it short: I'm in Haiti. Grid power is an
iffy proposition.
:-)
So we have to have heavy backups. That means generators and large
inverters. There is always a slight delay when switching to batterie
Hello,
I have been using Debian for years and one of the most annoying thing
about it is that at installation I can't select the US International
keymap. I have a couple of "é" in my name and I am, sadly, sensitive
about them.
I would like to file a bug/feature request against Debian Install
On 09/26/2014 06:31 PM, lee wrote:
Hi,
is there an easy way to force chronyd to get into/remain in its online
mode rather than going into offline mode?
So far, the documentation I found says it'll go and remain offline when
it can't reach a server. When that happens, it can only be put into
on
On 07/26/2014 03:11 PM, David Baron wrote:
Might be interesting if there were a utility/script to remove from
/lib/modules everything not used on the current system. Only a tiny minority
of the modules are actually needed.
There may be a downside to that: your disk is then bootable only on that
Hello,
I'm trying to install zabbix-server over lighttpd. I believe I have
zabbix-server and php5-fpm working correctly. The bottom of the log
files do not show any errors. But every time I hit the web server I get
a 403 Forbidden error. It's most likely a lighttpd configuration error
but I c
On 01/29/2014 06:10 AM, Mathias Bauer wrote:
* Darac Marjal wrote on 2014-01-29 at 10:22 (+):
On Wed, Jan 29, 2014 at 12:06:13AM -0800, Marc Shapiro wrote:
When my system boots up it starts chronyd. The problem is
that it seems to not have (or find) a network connection at
the time, so it
On 01/21/2014 03:38 AM, Andrei POPESCU wrote:
On Lu, 20 ian 14, 15:28:33, Henning Follmann wrote:
Yes,
in Wheezy bootlogd is active by default. In previous versions you had to
enable it by setting
BOOTLOGD_ENABLE=yes
in /etc/default/bootlogd
The boot messages will be logged to /var/log/boot
On 01/21/2014 03:38 AM, Andrei POPESCU wrote:
On Lu, 20 ian 14, 15:28:33, Henning Follmann wrote:
Yes,
in Wheezy bootlogd is active by default. In previous versions you had to
enable it by setting
BOOTLOGD_ENABLE=yes
in /etc/default/bootlogd
The boot messages will be logged to /var/log/boot
On 01/20/2014 01:20 PM, Henning Follmann wrote:
On Mon, Jan 20, 2014 at 12:44:35PM -0500, Philippe Clérié wrote:
I have a strange problem with Gunicorn on Debian Wheezy. Using
Debian init scripts, it does not start on a cold boot but works just
fine if started manually or on a warm reboot.
Any
I have a strange problem with Gunicorn on Debian Wheezy. Using Debian
init scripts, it does not start on a cold boot but works just fine if
started manually or on a warm reboot.
Any ideas what could cause that?
--
Philippe
--
The trouble with common sense it that it is so uncommon.
--
On 12/06/2013 04:13 PM, André Nunes Batista wrote:
On Fri, 2013-11-22 at 00:01 -0500, Long Wind wrote:
another question: how to find out if my PC support USB keyboard?
does grub support USB keyboard?
if it support USB KB, does that mean it support wireless keyboard?
I am considering logitech wir
On Monday 10 September 2001 12:51, Daniel de los Reyes wrote:
> Today I installed kylix open edition under Woody, but fonts on the gui
> look tiny. MAybe something wrong with my font server? Anybody else?
I have a similar problem. But only the popup and dropdown menus are affected.
The editor and
I have it installed on Woody. Went without a hitch. Just follow the
instructions.
The only problem I had was linked to the locale environment variables. On
startup Kylix says something about creating fonts and then quits. It seems
that it does not like the "C" locale. Set the appropriate LC? varia
>
> Subject: OT: can't access slashdot.org and freshmeat.net
> Date: Fri, Jul 06, 2001 at 07:40:26AM -0500
>
> In reply to:Philippe Clérié
>
> Quoting Philippe Clérié([EMAIL PROTECTED]):
> > This is probably off-topic and I apologize, but I am hoping that
the
> > collective wisdom on this list
Errors are 0. Remember, I did mention that this problem occurs for
several sites, all connected to the same ISP. Whatever the problem
is, it is unlikely to be just with my computer.
Best regards,
Philippe Clérié (philippe[at]gcal.net)
- Original Message -
From: Christian Jaeger <[EMAI
This is probably off-topic and I apologize, but I am hoping that the
collective wisdom on this list might shed some light on my problem.
For several weeks now I have been unable to access slashdot.org and
freshmeat.net. The connection either times out or ends up with HTTP
error 500: unknown host.
No problems at all. I've been using this package for quite a while.
http://master.debian.org/~tille/interbase
Best regards,
Philippe Clérié (philippe[a]gcal.net)
- Original Message -
From: Juan <[EMAIL PROTECTED]>
To:
Sent: Saturday, 23 June, 2001 18:21
Subject: Interbase
> Hi,
>
Never mind. I found the error. I followed the instructions in
README.phplib and added an auto_prepend_file to php.ini. So prepend
did get included twice, hence my problem.
Best regards,
Philippe Clérié (philippe[a]gcal.net)
- Original Message -
From: Philippe Clérié <[EMAIL PROTECTE
I am having some problems installing horde and imp from testing.
When trying to load horde I get:
Fatal error: Cannot redeclare class db_sql in
/etc/horde/db_mysql.inc on line 12
Which seems to imply that said class is declared twice in different
modules, which does not seem to be the case. Or th
>
> Samba will then hand it to lprng, which hands it to magicfilter,
which
> should notice that the file is in the printer's native language
(usually
> some form of PCL) and just send it straight back to lprng, which
finally
Then you don't need magicfilter, right! If all that's being done
is
I am trying to setup libpam-smbpass to synchronize Linux and Samba
passwords on a server. The intent is to have a single password for
several services, but mainly Samba itself and mail. However, I am
not having any real success.
In smb.conf I uncommented the following:
unix password sync = yes
pa
Got it! Thanks. Now if only I could figure out how I ended up
without termwrap.
> >- Original Message -
> >From: John Galt <[EMAIL PROTECTED]>
> >To: Philippe Clérié <[EMAIL PROTECTED]>
> >Cc: Debian User List
> >Sent: Saturday, 9 June, 2001 16:18
> >Subject: Re: Installation problems
Best regards,
Philippe Clérié ([EMAIL PROTECTED])
- Original Message -
From: John Galt <[EMAIL PROTECTED]>
To: Philippe Clérié <[EMAIL PROTECTED]>
Cc: Debian User List
Sent: Saturday, 9 June, 2001 16:18
Subject: Re: Installation problems
>
> I ran across this problem a while ago. W
Thanks all. I switched the CDROM set and I'm back to normal. But
this has been a very strange experience. I really wonder what caused
it. There must be something I did that caused it. Right I can't
think of it. :-)
Best regards,
Philippe Clérié (philippe[a]gcal.net)
I should have mentionned that I am doing this install from a CDROM
set of Potato, r0. I have been using that CD set for several months
now and this has never cropped up. Weird!!
I can't find a termwrap on any of the systems I have access to right
now (3) all with updated potato installation. A sea
I have done several Debian installations before and this is the
first time I've seen this one.
After installing the base system and rebooting from the hard disk
everything looks fine until inetd has started. Then I get the
following lines:
/bin/sh: /sbin/termwrap: cannot execute: no such file or
I have fetchmail installed correctly, as it runs quite nicely when I
start it manually. However, on startup, the /etc/init.d/fetchmail
script produces the following:
no mail servers have been specified.
fetchmail is already running.
It's as if the script is ran as some user other than root.
Any
51 matches
Mail list logo
