Art Lemasters writes:
> /usr/sbin/pppd: error in loading shared libraries libcrack.so.2 cannot
> open shared object file: no such file or directory
PAM is hosed. Downgrade ppp, if possible.
--
John HaslerThis posting is in the public domain.
[EMAIL PROTECTED] Do
I'm on a conservative disk space budget, and I want to know which packages I
have to get to get the base XFree86 system running (after a floppy
installation of Debian). Only the ones I have to get. I'll use the standard
SVGA server.
Adrian
How do I configure my sound card in linux? io=220 i=5
> > My relevant system specs are:
> >
> > Logitech FirstMouse 3buttons
>
> Logitech mice rule ;)
There is something else? =)
>
> > S3 ViRGE 325 PCI video card
> > Canopus Pure3D 3Dfx accelerator 3D card
> > Azura JEN0B00 monitor
> >
> > Here are my questions:
> >
> > 1) Running xf86config, How ca
Hi there... I stumbled on the same problem and I am now running it with the
scipt in /etc/rc.boot/ipmasq disabled,
and a startup file similar to what you are using.
It seems to be the simplest way to run IP masq.
I ahaven't tried deciphering the script that uses /etc/ipmasq.conf to see
what it d
Try using isapnptools to configure the sound chip. It's probably an ISA
PnP device.
Jeff
Hi,
How am I supposed to use the ipmasq package with ppp? Is it possible?
I tried using 0.0.0.0 as the external ip address, but I received a
few error messages when booting and I couldn't telnet to the machine
anymore. I couldn't find any documentation in /usr/doc/ipmasq and the
man pages just sai
On Thu, 8 Oct 1998, Leo Lincourt wrote:
> Hi all,
>
> I just received the Debian CD's from Linux-Central, in addition to the
> Linux-Central Archive Discs and must admit to being to confused by a few
> things. Any help for a Linu newbie would be greatly appreciated.
>
> Issues:
> 1) The installa
I just bought a new machine (at work) and it came with both video and
sound on the motherboard. I tried (briefly) to get XFree to work with
the on-board video controller, but to no avail (other than at standard
VGA resolutions). I used instead the video card from my 'old' machine.
I did not have
Hi all,
I just received the Debian CD's from Linux-Central, in addition to the
Linux-Central Archive Discs and must admit to being to confused by a few
things. Any help for a Linu newbie would be greatly appreciated.
Issues:
1) The installation goes well, up to the point where dselect attempts to
Last night, I did an upgrade download. Today, the power went
down while I was at work, so this box rebooted.
I tried "sudo pon," and no dialin. The following message
was displayed:
/usr/sbin/pppd: error in loading shared libraries
libcrack.so.2 cannot open shared object file: no suc
Thanks much.
libc6 (glibc2) is no problem, but I shall have to check the c++ libs.
These would be runtime and not dev? I'm sure I have these!
Thanks,
Jeremiah
---Ian Stuart <[EMAIL PROTECTED]> wrote:
>
> Jeremiah Cornelius wrote:
> > I understand that an Apt command-line and gui client are ava
Whenever I am trying to attach a file to a message using exmh, it says that
its default type is audio/basic.
When I used to do the same thing under bo, it used to show the correct type of
the file.
does anybody else exprienced it ?
Is it a matter of some settings that has to be changed ?
I tried
Paulo,
The following script works nicely to do many transformations on
filenames. In your case, invoke as:
rename 'tr/A-Z/a-z/' *
#! /usr/bin/perl
#
# rename perlexpr [files]
#
# from "Programming Perl" by Larry Wall and Randall Schwartz, p309.
#
# Examples:
# rename '\.bak$//' *.b
I have a IBM PS/2 486dx with a 200 mg hd Debian will not recognize that
the hd is there. Cfdisk gives me an error like this FATAL ERROR Can not
open hard disk. With fdisk it says it can not access the hard disk but
it knows that it is a scsi hard disk. This all happens at the third
step: Partition
>> "PO" == Paulo Henrique Baptista de Oliveira <[EMAIL PROTECTED]> writes:
PO> I need to translate 800 filenames from upcase to lowercase.
PO> I remember that I can do this with tr, but I don't know very well.
This is a job for Superman. If he is not available, create the
Bat-Symbol in the sky
How do I get diald to ignore a non-routable lan address like 192.168.x.x ? I
had a situation were I was pinging the nodes in my 192.168.x.x lan and one
machine was off-line. Diald started dialing when IMHO, it should have ignored
the packet. So, I must have something not correctly configured. The m
I had the same problem - ordering from them was like ordering into an empty
void...
Try LSL - I've had pretty good luck with them, even though they sometimes are a
little behind in updating the latest binaries and source on thier CDs (but
unfortunately, I've not found anyone else to be much better
On 8 Oct 1998, Ruud de Bruin wrote:
> I have bought the latest version of ApplixWare and I would like to add
> ApplixWare to WindowMaker so I can start it from there.
>
> I've created an entry in /etc/menu like:
>
> ?package(applix):needs="x11" section="Apps/Editors" icon="none"
> title="APPLIX"
Debian user community:
If anyone is missing product or has any other problems with Greenbush
Technologies Corporation, please email me immediately at
[EMAIL PROTECTED] so we can resolve it.
I will do everything I can to speedily resolve any customer
dissatisfaction and all I ask is that you give
Leon Breedt wrote:
>
> hi
>
> am getting weird error messages with dselect under hamm:
>
> --PASTE---
>
> internal error - no filename at -e line 12, chunk 13.
>
> installation script returned error exit status 1.
> Press RETURN to continue.
>
> --END PASTE--
>
> erm, anyone know wot i'm do
On Thu, Oct 08, 1998 at 06:51:33PM +, Ruud de Bruin wrote:
> I have bought the latest version of ApplixWare and I would like to add
> ApplixWare to WindowMaker so I can start it from there.
>
> I've created an entry in /etc/menu like:
>
> ?package(applix):needs="x11" section="Apps/Editors" ic
On Thu, Oct 08, 1998 at 03:49:00PM -0200, Paulo Henrique Baptista de Oliveira
wrote:
> Hi debian users,
> I need to translate 800 filenames from upcase to lowercase. I remember
> that I can do this with tr, but I don't know very well.
> Any hints?
> Have a nice day,
Andy Spiegl wrote:
> Hi Martin,
s/Martin/Joey/
> > Thaks Ray.
> Ray?
Ray knows why. :-)
> > Please contact [EMAIL PROTECTED] with a forward including
> > *all* header of such a mail so we can track it down.
> Oh, okay, good to know. I suppose it's "[EMAIL PROTECTED]"
> not "listmastere", right
On Thu, Oct 08, 1998 at 02:13:24PM -0400, joseph evan porter wrote:
> > > Anyway, is there a replacement for xdm. I know about kdm but I want to
> > > use windowmaker so I don't want to take up all the space with kdebase
> > > and libs and support...
> > >
> > > Can I use kdm without all that or
Hi Martin,
> Thaks Ray.
Ray?
> Please contact [EMAIL PROTECTED] with a forward including
> *all* header of such a mail so we can track it down.
Oh, okay, good to know. I suppose it's "[EMAIL PROTECTED]"
not "listmastere", right?
> The only stupid question is the unasked one.
Thanks for the enco
I just set up my system to use Amanda only to discover that it cannot
append to tapes, thus wasting a ton of space on every run (imagine
putting a 90MB incremental backup on a tape that can store 24GB and
then using a brand new tape the next night). Is there another package
with a similar level of
Paulo Henrique Baptista de Oliveira wrote:
> Hi debian users,
> I need to translate 800 filenames from upcase to lowercase. I remember
> that I can do this with tr, but I don't know very well.
In tcsh:
$ foreach F (*)
foreach? mv $F `echo $F | tr '[A-Z]' '[a-z]'`
foreach? end
In b
Ruud de Bruin wrote:
> I have bought the latest version of ApplixWare and I would like to add
> ApplixWare to WindowMaker so I can start it from there.
>
> I've created an entry in /etc/menu like:
>
> ?package(applix):needs="x11" section="Apps/Editors" icon="none"
> title="APPLIX" command="..."
>
Andy Spiegl wrote:
> Hi,
>
> everytime I send a mail to the list I get a mail back from
> [EMAIL PROTECTED]
> with the subject:
> SMTP import error #-5
finlandia!joey(tty6):~> telnet genesis.ispace.com smtp
Trying 208.143.216.13...
Connected to genesis.ispace.com.
Escape character is '^]'.
220
Thaks Ray.
Andy Spiegl wrote:
> Hi,
>
> everytime I send a mail to the list I get a mail back from
> [EMAIL PROTECTED]
> with the subject:
> SMTP import error #-5
Please contact [EMAIL PROTECTED] with a forward including
*all* header of such a mail so we can track it down.
> Yesterday I even
Pere Camps <[EMAIL PROTECTED]> writes:
> Whenever I return from a subshell of 'mc' I get the following
> error:
>
> TIOCLINUX (0/8/9) ioctl is gone - use /dev/vcs
>
> And then mc hangs.
>
I've the same problem, but only in single user mode. Then not only mc
hangs, but the whole mach
I have bought the latest version of ApplixWare and I would like to add
ApplixWare to WindowMaker so I can start it from there.
I've created an entry in /etc/menu like:
?package(applix):needs="x11" section="Apps/Editors" icon="none"
title="APPLIX" command="..."
However, after running update-menus
Hi debian users,
I need to translate 800 filenames from upcase to lowercase. I remember
that I can do this with tr, but I don't know very well.
Any hints?
Have a nice day,Paulo Henrique
joseph evan porter <[EMAIL PROTECTED]> writes:
>
> The easiest way to restart it from there is to (heavens, no!) reboot. I
> don't keep my machine on all the time, so this is easiest for me. Others
> might have a safer solution.
>
Try '/etc/init.d/wdm start' (if xdm is running, you should do
'
"M.C. Vernon" <[EMAIL PROTECTED]> writes:
| I did all of that, and now it says no more unread newsgroups, even though
| if I then read trn there's quite a lot of unread news :((
This isn't the same as the previous email where you said it wouldn't
connect.
Have you subscribed to any groups within
Once again, I must be the bearer of bad tidings...
The SupraMax PCI (and all of the Supra series PCI modems) will not work
with Linux. Please search the mailing list archives for my more detailed
explanations. Several people have had trouble with these modems
(including myself). You'll either n
> > Anyway, is there a replacement for xdm. I know about kdm but I want to
> > use windowmaker so I don't want to take up all the space with kdebase
> > and libs and support...
> >
> > Can I use kdm without all that or is there something else I can
> > use instead of xdm?
>
> Perhaps you shou
Hi,
everytime I send a mail to the list I get a mail back from
[EMAIL PROTECTED]
with the subject:
SMTP import error #-5
Yesterday I even got a mail from
[EMAIL PROTECTED]
notifying me that my fax hasn't been sent!
I didn't even mention faxaway anywhere. What's going on here?
When I post a
On Thu, 8 Oct 1998, Nico De Ranter wrote:
:
: Howdy,
:
: I'm trying to install Debian on a Toshiba 490XCDT. unfortunately
: the machine keeps rebooting after "Linux..". I tried creating
: a Tecra rescue disk (resc1440tecra.bin) but that doesn't help.
:
: Any other ideas?
Hi,
I
> "M.C. Vernon" <[EMAIL PROTECTED]> writes:
> | > What's the value of your NNTPSERVER environment variable? What about
> | > the value of gnus-default-nntp-server in Emacs after you start gnus?
> | > You can add the following to your ~/.gnus file:
> |
> | Hmm...NNTPSERVER isn't set :(. Where do I
Bruno Boettcher wrote:
> i recently installed a debian system, and since then have a completely strange
> system time: my clock reports:
> 09:13:43 yoda:~$ date
> Thu Oct 8 09:14:23 MST 1998
> and a correctly working host:
> 16:17:21 erm6:~$ date
> Thu Oct 8 16:17:29 CEST 1998
>
> that's a bit
Person, Rod wrote:
> Anyway, is there a replacement for xdm. I know about kdm but I want to
> use windowmaker so I don't want to take up all the space with kdebase
> and libs and support...
>
> Can I use kdm without all that or is there something else I can
> use instead of xdm?
Perhaps you
On Thu, 8 Oct 1998, Ulisses Alonso Camaro wrote:
: -BEGIN PGP SIGNED MESSAGE-
:
: Hi again Matthew
:
: On Thu, 8 Oct 1998, M.C. Vernon wrote:
:
: >
: >
: > Hmmm...as a crude hack, I edited /etc/modules:
: >
: > ne io=0x300
: >
: > Is this OK (it seems to have worked), o
Hi!
Whenever I return from a subshell of 'mc' I get the following
error:
TIOCLINUX (0/8/9) ioctl is gone - use /dev/vcs
And then mc hangs.
I'm using Debian 2.0 with the latests packages installed. Any help
will be greatly appreciated.
Salutacions, Pere __o
At 10:01 AM 10/8/1998 -0400, Brent McMillan wrote:
>I have the exact thing happen, but I think my message gets through any
>way.
Ditto.
>
>On Thu, 8 Oct 1998, Andy Spiegl wrote:
>
>> Hi,
>>
>> everytime I send a mail to the list I get a mail back from
>> [EMAIL PROTECTED]
>> with the subject:
According to <[EMAIL PROTECTED]>:
>>
>> I am using a program called safedelete that you alias to rm.
>> It is not a Debian package but is found on Sunsite. It saves
>> the files in a directory in your home directory for a
>> configurable amount of days.
It sounds good, but I don't think alias i
I have installed xforms (libforms0.88, the debian2.0 stable package) and
I cannot find fdesign.
When I type fdesign
bash: fdesign: command not found
fd (TAB) does not show fdesign.
Is fdesign separate package ?
I cannot find it in ftp site /debian/dists/stable/..
Thanks in advance for help
I have just tried to install lynx 2.7.1-3. My system is 1.1 which I am trying
to upgrade to 1.3 . The postinst fails because it needs awk and I don't have
awk installed. Is there any workaround short of installing awk?
Chuck Kaufman
Hi, folks
I would like to know where I must define the runlevel
to enter directly in X after boot.
Thanks.
Vasili Goutas Kernel Hacker wrote:
>
> I´m running debian Linux 2.0 and try to start Netscape, but I get the
> message
> ´can´t load library libXpm.so.4´. I have added the path to this lib in
> the environment variable LIBRARY_PATH but its still the same.
> I can´t find any readme or howtos w
"M.C. Vernon" <[EMAIL PROTECTED]> writes:
| > What's the value of your NNTPSERVER environment variable? What about
| > the value of gnus-default-nntp-server in Emacs after you start gnus?
| > You can add the following to your ~/.gnus file:
|
| Hmm...NNTPSERVER isn't set :(. Where do I set it (I gu
Try This
edit the Makefile and uncomment the SMP lines
make mrproper
make menuconfig (select Sound Support with a 'Y')
-Select the correct drivers
-(If sound blaster set io, irq etc.)
-in the 2.0.34 kernel there is a setting to "Use the old sound
configuration script--U
please take note that netscape requires a lot of lib's , specially the ones
from section /oldlibs/ ... go to the debian homepage > packages and try to see
what those packages are ok ? ... and when u install netscape use the
netscape???.deb installer, put the 9mb something netscape package in /tm
I want to set up a lab of machines here at college. I would like these machines
to not know their own IP address when they're booting, but have it assigned to
them by another machine based on their ethernet addresses. bootp and dhcp are
two systems I've heard of that apparently can be used for this
> What's the value of your NNTPSERVER environment variable? What about
> the value of gnus-default-nntp-server in Emacs after you start gnus?
> You can add the following to your ~/.gnus file:
Hmm...NNTPSERVER isn't set :(. Where do I set it (I guess .bash_profile
isn't much good, and won't help t
I´m running debian Linux 2.0 and try to start Netscape, but I get the
message
´can´t load library libXpm.so.4´. I have added the path to this lib in
the environment variable LIBRARY_PATH but its still the same.
I can´t find any readme or howtos which describes what env. variab.
Netscape needs
I installed gimp 1.0.1 from slink and can't make it print directly to
the printer (through lpr). In the "Print" dialog, I can only choose to
print to a file--no printers are accessible. I suppose I need to tell
gimp which printer(s) I have but I can't find anything in the docs.
I have noticed, h
Hi, David,
Thanks for the advice. I am doing a fresh install. My CD is on the way to
my place, so I only download the 1440resc.bin, 1440driv.bin and those
base*.bins. When I was asked to configure the module, I could not find
anything with NIC or "Vortex/Boomerang" among the choice list. I am usin
> Person, Rod wrote:
> > Hey all,
> >
> > I was attempting to install siag, and the installition call for me to do
> > the following...
> >
> > vi mktop.dr
> >
> > now this is the second thing I tried to install that called for me to
> > use vi and everytime I do it print the file t
-BEGIN PGP SIGNED MESSAGE-
On Thu, 8 Oct 1998, Person, Rod wrote:
> Anyway, is there a replacement for xdm. I know about kdm but I want to
> use windowmaker so I don't want to take up all the space with kdebase
> and libs and support...
Aside from kdm, I don't know of a real replacement
-BEGIN PGP SIGNED MESSAGE-
On Thu, 8 Oct 1998, E.L. Meijer (Eric) wrote:
> Excuse my ignorance, but isn't xdm that program you need during the
> twenty seconds it takes to log in? What does kdm do that would make a
> person so much happier during that event?
>
Well, kdm actually does o
Howdy,
I'm trying to install Debian on a Toshiba 490XCDT. unfortunately
the machine keeps rebooting after "Linux..". I tried creating
a Tecra rescue disk (resc1440tecra.bin) but that doesn't help.
Any other ideas?
Nico
--
--
Nico De Ranter
Sony Service Center (PSDC-B/DNSE-B)
Sint Stev
DeJay wrote,
> > Did you have a coprocessor, and did you have xfs running?
> yes, I had a coprocessor.
> I believe you are referring to 'xdm', not xfs. i had xdm running as
> well. xfs (dos-based nfs client) was running on my 286, while pcnfsd
> nfsd and mountd were running on my 386.
Nope, I
Hi,
I'm having trouble getting Debian 2.0 to install from a hard disk
partition (the PC in question doesn't have a CD drive :-()
I downloaded all the stuff I needed (according to install.html) from
ftp.debian.org, and put it on my HD (DOS drive D:, subdirectory \debian)
Then I started the install
On Thu, Oct 08, 1998 at 09:47:35AM -0400, Christian Lavoie wrote:
> I've just started initiating myself to Linux, and I have a few questions
> installing the XWindows system.
>
> My relevant system specs are:
>
> Logitech FirstMouse 3buttons
Logitech mice rule ;)
> S3 ViRGE 325 PCI video card
>
On: Tue, 06 Oct 1998 18:01:16 -0500 Kent West writes:
>
> If I go into the Method option of dselect and change my ftp source
> from stable to unstable, in order for me to download one package
> (gnome), will dselect try to download everything that's got a newer
> version to what I've got installed
On: Wed, 7 Oct 1998 13:44:45 +0200 Remo Badii writes:
>
> Dear Debs,
> 1) is PPP support needed for ISDN (which uses, as the documentation says,
>syncPPP instead)? At the moment, I have PPP as a module in the
>kernel and I am about to try an ISDN connection.
You don't need PPP for ISDN.
On: Wed, 07 Oct 1998 14:01:03 -0700 Aldinga Library writes:
[...]
> The system clock is about two hours incorrect.
> Logged in as root, I have tried setting the system clock with the date
> command but the system clock goes back to the old time when I reboot.
> How do I set the system clock and
On Thu, 8 Oct 1998, Mans Joling wrote:
> Dear Sir,
> How do I install my HP Deskjet500 under linux
> Kind Regards
> Mans Joling
>
Install the magicfilter package, run magicfilterconfig (I think this runs
automatically when you install the package) and select "dj500". I would
suggest that you g
Wilson Tuma wrote:
>
> Hi
>
> Plase could you give the the files I have to download to be able to install
> linux man pages so I can get help by typing say
>
> man rm
> man cp
Install the man-db package.
Noel
hello,
i recently installed a debian system, and since then have a completely strange
system time: my clock reports:
09:13:43 yoda:~$ date
Thu Oct 8 09:14:23 MST 1998
and a correctly working host:
16:17:21 erm6:~$ date
Thu Oct 8 16:17:29 CEST 1998
that's a bit strange how do i get it corre
Shaleh wrote:
>
> Hi, I just installed the postgreSQL packages. However I can not add users
> because
>
> foo# createuser
> Connection to database 'template1' failed.
> FATAL 1: SetUserId: user "root" is not in "pg_shadow"
>
> createuser: database access failed.
> foo#
>
> The docs are not he
I'm trying to load 2.0 via NFS, so I have to install and configure the
network card driver etc., and I can get all the way down the install list;
however, when I try to install the NIC driver into the kernel, I get an
error message:
(yadda yadda) init_module: Device or resource busy
I've tried us
I have the exact thing happen, but I think my message gets through any
way.
On Thu, 8 Oct 1998, Andy Spiegl wrote:
> Hi,
>
> everytime I send a mail to the list I get a mail back from
> [EMAIL PROTECTED]
> with the subject:
> SMTP import error #-5
>
> Yesterday I even got a mail from
> [EMA
Maybe you have himem.sys installed (and loadhigh) in DOS.
If yes, disable them.
Remo
| Dr. Remo Badii | Paul Scherrer Institute |
| Nonlinear Dynamics and | 5232 Villigen PSI |
| Stochastic Processes Group | Switzer
Hi,
everytime I send a mail to the list I get a mail back from
[EMAIL PROTECTED]
with the subject:
SMTP import error #-5
Yesterday I even got a mail from
[EMAIL PROTECTED]
notifying me that my fax hasn't been sent!
I didn't even mention faxaway anywhere. What's going on?
Really confused,
A
Hi!
> I've also had problems dealing with this package:
>
> dpkg: error processing dhcpcd (--configure):
> subprocess post-installation script returned error exit status 1
> Errors were encountered while processing:
> dhcpcd
>
> Anyone have any ideas?
Try to run the post-installation script b
On Wed, 7 Oct 1998, Richard E. Hawkins Esq. wrote:
> De Jay wrote
> > FYI, when I tried running Netscape on my 386 with 8M RAM (30M swap),
> > it locked up my machine every time. you've been warned.
>
> Did you have a coprocessor, and did you have xfs running?
yes, I had a coprocessor.
I believ
I've just started initiating myself to Linux, and I have a few questions
installing the XWindows system.
My relevant system specs are:
Logitech FirstMouse 3buttons
S3 ViRGE 325 PCI video card
Canopus Pure3D 3Dfx accelerator 3D card
Azura JEN0B00 monitor
Here are my questions:
1) Running xf86con
On Thu, Oct 08, 1998 at 02:04:20PM +0100, M.C. Vernon wrote:
> On Thu, 8 Oct 1998, M.C. Vernon wrote:
>
> > Dear all,
> >
> > When I try and ytalk someone on my machine, I get:
> >
> > # No talk daemon on pick.sel.cam.ac.uk #
> > #No such file or di
Howdy,
I'm trying to install Debian on a Toshiba 490XCDT. unfortunately
the machine keeps rebooting after "Linux..". I tried creating
a Tecra rescue disk (resc1440tecra.bin) but that doesn't help.
Any other ideas?
Nico
--
--
Nico De Ranter
Sony Service Center (PSDC-B/DNSE-B)
Sint Stev
That was in April...
And I'm still waiting for ...11 PAID editions of Debian :-((
--- Start of forwarded message ---
message: inbox_19980501 8
date: Mon Apr 6 14:38:00 1998
to:Linh (L.) Dang :6X21 (BNR)
from: [EMAIL PROTECTED]
This email explains the problems I had with
my deleted root partition
George
---
George Kapetanios
Churchill College
Cambridge, CB3 0DSE-Mail: [EMAIL PROTECTED]
U.K. WWW: http://garfield.chu.cam.ac.
According to Person, Rod <[EMAIL PROTECTED]>:
> As a newbie, I guess I have reached the level of comfort with Debian
> that now I want better, fast etc...
>
> Anyway, is there a replacement for xdm. I know about kdm but I want to
> use windowmaker so I don't want to take up all the space with kdeb
Hi!
Has ANYONE got a faint IDEA where to get
A IBM RS6000 Microchannel - RISC linux ??
It is mentioned in the introduction to
MCA linux in www.linux.org -
I didnt find more .. ;-(
Thanks
Anton
--
+-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+
:Anton J. Ga
On Thu, Oct 08, 1998 at 09:08:49AM -0400, Person, Rod wrote:
> As a newbie, I guess I have reached the level of comfort with Debian
> that now I want better, fast etc...
>
> Anyway, is there a replacement for xdm. I know about kdm but I want to
> use windowmaker so I don't want to take up all the
>
> As a newbie, I guess I have reached the level of comfort with Debian
> that now I want better, fast etc...
>
> Anyway, is there a replacement for xdm. I know about kdm but I want to
> use windowmaker so I don't want to take up all the space with kdebase
> and libs and support...
>
> Ca
I don't know how much you want to spend, so I can't give you an exact
idea but...
I was just doing some looking for my father who wanted to buy a new
computer for about $1500. You can get more computer for less money in
this ball park from the K6-2 processors. The K6-2-350 benchmarks
about the s
Hi,
I upgrade some packages yesterday and found a problem with the
above module. Some *.postint script tried to include it from
/usr/lib/perl5/i386-linux/5.005 but it's installed at /usr/lib/perl5. This
broke my upgrade and was solved only with a ln -s to the right location.
Is th
Hello Jens:
Yes -- see xntp3
Peter
-Original Message-
From: Jens Lisner <[EMAIL PROTECTED]>
To: Debian-User-List
Date: Thursday, October 08, 1998 7:48 AM
Subject: Timeserver?
>
>Hi all!
>
>My provider gave me a timeserver adress. What can I do with it under
>Linux?
>
>Jens
>
>
>
>--
>
Dear all,
I'm trying to get this setup properly, with only limited success
ATM. Here is the devices section:
Section "Device"
Identifier "Primary Card"
VendorName "Unknown"
BoardName "ATI Pro Turbo+PC2TV, 3D Rage II+DVD"
VideoRam8192
Is this right for
-BEGIN PGP SIGNED MESSAGE-
Hi again Matthew
On Thu, 8 Oct 1998, M.C. Vernon wrote:
>
>
> Hmmm...as a crude hack, I edited /etc/modules:
>
> ne io=0x300
>
> Is this OK (it seems to have worked), or have I planted a timebomb?
This trick may work now, but as it is not documented in the
On Thu, Oct 08, 1998 at 04:36:11PM -0700, Aldinga Library wrote:
> I have an NEC powermate 486 sx-25i , 4mb ram, 120mb hd and floppy drive
> only.
> I use the internet at the local public library.
> I have done a bare minimum install of 8 floppies by internet ftp.
>
> What commands do you use to v
As a newbie, I guess I have reached the level of comfort with Debian
that now I want better, fast etc...
Anyway, is there a replacement for xdm. I know about kdm but I want to
use windowmaker so I don't want to take up all the space with kdebase
and libs and support...
Can I use kdm witho
On Thu, 8 Oct 1998, M.C. Vernon wrote:
> Dear all,
>
> When I try and ytalk someone on my machine, I get:
>
> # No talk daemon on pick.sel.cam.ac.uk #
> #No such file or directory#
>
> Where do I get the talk daemon from?
Hmm - talk an
Dear all,
When I try and ytalk someone on my machine, I get:
# No talk daemon on pick.sel.cam.ac.uk #
#No such file or directory#
Where do I get the talk daemon from?
a grep of contents-i386.gz doesn't seem to help either.
Sorry,
Hi Jens,
you could use the time server to set your PC clock. Look in the man
pages for xntpd (I don't know how to do it...)
Ciao
Michael
Hmmm...as a crude hack, I edited /etc/modules:
ne io=0x300
Is this OK (it seems to have worked), or have I planted a timebomb?
Matthew
--
Elen sila lumenn' omentielvo
Steward of the Cambridge Tolkien Society
Selwyn College Computer Support
http://www.geocities.com/Area51/Chamber/8841/
http:
Hi all!
My provider gave me a timeserver adress. What can I do with it under
Linux?
Jens
1 - 100 of 146 matches
Mail list logo
