On Fri, Nov 14, 1997 at 09:55:07AM -0200, Otavio Exel wrote:
> I see all dselect stuff live in /var/lib/dpkg; I'd say /var is not a
> safe place to keep such important stuff; any opinions?
Well then, where would you want it to be? The latest version of FHS
(Filesystem Hierarchy Standard) tells us
> Can I somehow use this card and assign irq 5 to the new com port and move
> the sound card to say 7?
Edit /etc/rc.boot/0setserial . That will get the serial card going.
You might have to re-build the kernel to move the sound card IRQ.
Bruce
--
Can you get your operating system fixed w
On 14-Nov-97 [EMAIL PROTECTED] wrote:
>
>Hi--
>
>I need to know the path for the tcl.h file and I have been unable to
>locate it myself. Any direction is greatly appreciated.
Try this:
find / -type f -name tcl.h -print
>
>Thanks in advance!
>
>Ian
>
>
>--
>TO UNSUBSCRIBE FROM THIS MAILING LIS
On Fri, Nov 14, 1997 at 01:17:10PM +0100, Alfredo Todini wrote:
> I have two disks: a 1Gb disk, with Windows 95, and a 2GB disk, with
> Linux. Now I need to replace Windows 95 with Windows NT. I read the
> Linux+NT mini-HOWTO, and it suggests to install Linux after NT. However
> I absolutely cannot
On 14-Nov-97 Alfredo Todini wrote:
>I have two disks: a 1Gb disk, with Windows 95, and a 2GB disk, with
>Linux. Now I need to replace Windows 95 with Windows NT. I read the
>Linux+NT mini-HOWTO, and it suggests to install Linux after NT. However
>I absolutely cannot destroy or damage my Linux part
Thanks for the suggestions so far; running the install without
floppy=thinkpad does get me further into the install, but then I get
more strange stuff. The system prints out a set of instructions for
continuing the low-memory install, then follows that with a list of
fdisk choices. At this point
The following message is a courtesy copy of an article
that has been posted to gnu.misc.discuss,comp.os.linux.advocacy as well.
Hi,
This is a long post, so I've divided it into sections---Preface,
Request for Feedback, Consideration, Conclusion, Appendix---to help
you figure out whether it's wort
Hi,
I use this as root:
# xauth -f ~srivasta/.Xauthority -i extract - $DISPLAY | xauth merge -
manoj
--
"Therefore, one should never admit a garrison larger than one's own
forces, especially when composed of barbarians." Polybios, writing in
the mid-2nd century BC (paraphr
If your modem is not plug & play and you have luck, you probably don't have to
configure the modem at all, since it is done at boot.
You can try
setserial -g /dev/ttyS1
to see if it seems like your modem.
For my modem, also on COM 2, this gives:
/dev/ttyS1, UART: 16550A, Port: 0x0
Hi, everyone --
I have a problem that goes way beyond my knowledge of linux:
while downloading a gnuplot example page in Netscape3.04 running on
machine from debian1.3 tree sources) whole server crashed - completely
closed down and threw me back to the command line on a virtual console
(X is star
[bitgate]udjat ~ $> w
1:22pm up 17:11h, 2 users, load average: 0.11, 0.06, 0.07
USER TTYLOGIN@ IDLE JCPU PCPU WHAT
tigger ttyp0 3:10am 8:54h 0.00s ?-
udjatttyp1 8:06am 0.00s 0.00s ?-
The PCPU & WHAT entrys no longer work. PLEASE HELP!!!
Thanks!
-Eri
Sorry if this is a rerun, I think the list rejected it the first time
because my email address was bad, which is sort of the point of this
thread.
On Thu, 13 Nov 1997, Paul Miller wrote:
> it was set to (none) ... changing it to 3dillusion.com also had no
> effect.. I don't think I have the NIS
Hi!
If anybody sent replies to my reply about the re:, please send
them again. I accidentally deleted them.
Thanks.
Salutacions, Pere __o mailto:[EMAIL PROTECTED]
2:343/108.91 - _`\<;_ http://casal.upc.es/~pere/
PGP key available --- (_
Hi!
I just bought a NCR53c8xx based card and a CD-RW drive, and it
seems that linux can't recognize the drive.
When I boot up, I get:
scsi host: 0 detected total
And /proc/pci doesn't say anything about the SCSI card.
I've read in the SCSI howto that linu
Stephen Zander <[EMAIL PROTECTED]> writes:
> Mine has
>
> ./include
> ./include/X11
> ./lib
> ./lib/X11
> ./lib/X11/XErrorDB
> ./lib/X11/XKeysymDB
> ./lib/X11/app-defaults -> ../../../X11R6/lib/X11/app-defaults
> ./lib/X11/locale -> /usr/X11R6/lib/X11/locale
>
> The XErrorDB & XKe
Dale Martin wrote:
> No problem. You did disprove my theory of mine however. Normally, when I
> post to this list, if I don't get a response within 15 minutes one never
> comes. :-)
There's a link to Heilsenberg's (sp?) Uncertainty Principle there
somewhere :)
> Well, I'm running 3.3.1-1, I and
Miquel van Smoorenburg wrote:
>
> Neither can I, that's why I'd like you to try the latest version so that
> _if_ something is wrong I can base the fix also on that latest version..
Drat. Same problem using squid version 1.1.17-1. This is what I found
on the console after rebooting.
-
I just got PPP working a couple days ago at home, so this is
still fresh in my mind. For some reason, the /dev/cu
devices didn't exist (using minicom clued me into this), so
I had to do `cd /dev ; ./MAKEDEV serial-cu` to get started.
After I got the /dev/cu devices, things went very smooth.
--
[EMAIL PROTECTED] wrote -
> I have compiled a 2.0.31 kernel. One of the reasons for doing so was to
> use autofs. However when I did make menuconfig I didn't see an option for
> autofs support. I thought it was in the kernel anyway and instaled he
> package. However the package does not find autofs
According to Behan Webster:
> > Really strange, I cannot reproduce this. Hmm. I just compiled squid_1.1.17
> > for libc5 and put it on
> > ftp://ftp.cistron.nl/pub/people/miquels/debian/libc5-compiled/
>
> I'll give it a shot.
>
> Just a thought, I'm wondering whether it has to do with the order
Hello all:
Is there something wrong with the list servers or is it me ?
Peter
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
On Fri, 14 Nov 1997, Jan Echternach wrote:
>On 14 November 1997, Sten Anderson <[EMAIL PROTECTED]> wrote:
>> Another workaround is:
>>
>> cp /home/USER/.Xauthority /root/
>
>Or to set XAUTHORITY to point to the user's .Xauthority. I've done this
>with my "xterm -e root", and it works pretty
Miquel van Smoorenburg wrote:
>
> According to Behan Webster:
> > > > Sun Nov 9 14:01:48 EST 1997: Running: squid -D -s -f /etc/squid.conf
> > > > >> /var/log/squid/squid.out 2>&1
> > > > /usr/lib/squid/RunCache: line 38: 337 IOT
> > > > trap/Abort
> > > > squid -D
"Oliver Elphick" wrote:
> Will Lowe wrote:
>> I'd like my system to come up running xdm or kdm. What is the proper
>> place to do this? Right now I'm just logging in and doing "sudo kdm",
>> but I've a feeling that there's probably a correct runlevel or something
>> to do this in.
> In /
Well, you could install NT onto of Win95. Meaning that you install in the
same partition of Winp5 but it gets confusing later on as you might have to
install software for both NT and 95. If you want trully NT and Linux. Kill
the 95 partion and install NT first on the first partition and Linux next.
Daniel Martin wrote:
>
> On Wed, 12 Nov 1997, Andrew Akins wrote:
>
> > Checking for languages ... de_DECan't locate Getopt/Long.pm in
> > @INC at /usr/sbin/chmanconfig line 38.
> > BEGIN failed--compilation aborted at /usr/sbin/chmanconfig line 38.
> >
> > Any idea what this means? Any suggest
Dear Users,
I ask you to help me to solve problems with using the "cdrecord-1.6"
with "HP-CDWriter 7100" device.
The situation is the folowing:
I use the kernel-2.0.31 and I have my CD-writer as IDE/ATAPI.
So I have received last version of cdrecord and xcdroast interface for it,
install
On Fri, 14 Nov 1997, Paul Miller wrote:
: On Fri, 14 Nov 1997, Nathan E Norman wrote:
:
: > On 14 Nov 1997, Carey Evans wrote:
[ snip ]
: >
: > Notice the absence of "ns.3dillusion.com!
:
: Is this a problem w/ my name server, InterNIC, or tcimet.net and what
: needs to be done?
It's a problem
On Thu, 13 Nov 1997, Paul Miller wrote:
> it was set to (none) ... changing it to 3dillusion.com also had no
> effect.. I don't think I have the NIS package installed, what is it?
I have a similar problem; when I run pine I get the message
incomplete maildomain "annette"
Return address i
Hi All,
Don't know what made this occur but any help would be great.
The last few days anytime I type a
z or a
Z may machine sends the
z plus a line feed. Any Ideas on how to correct this?
Is an .inputrc file needed?
Thanks,
Mike
Mike NachlingerApres Ski Club, Inc.
1-888-APRESGO
In article <[EMAIL PROTECTED]>, you wrote:
> I upgraded some packages to unstable yesterday, and now xdm
> dies, restarts, dies, restarts, dies, ... so I can't log on
> to fix it (I probably removed the old libX, while xdm is still
> linked to it!). Is it possible to disable xdm from lilo, or boot
I have a machine that is connected to the net and want to set up a slip or
ppp server only so that I can dial into the machine via a connected modem
with a PDA (palm pilot) that can establish either a slip or ppp
connection. Setting this up must be covered in a FAQ, can I assign some
kind of local
On Fri, 14 Nov 1997, Nathan E Norman wrote:
> On 14 Nov 1997, Carey Evans wrote:
>
> Hang on here.
>
> If I do "whois 3dillusion.com", I get (among other things)
>
>Domain servers in listed order:
>
>NS.3DILLUSION.COM198.109.162.43
>METS.TCI.EAST-LANSING.MI.US 198.109.
I have recently acquired the need for another com port and am already
using com1 (mouse) and com2(UPS) and found the following paragraph in a
FAQ for the palm pilot (the palm pilot is a PDA that has a syncronization
cradle that connects to a com port):
What to do if you do not
Hi--
I need to know the path for the tcl.h file and I have been unable to
locate it myself. Any direction is greatly appreciated.
Thanks in advance!
Ian
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
On 14 Nov 1997, Carey Evans wrote:
Hang on here.
If I do "whois 3dillusion.com", I get (among other things)
Domain servers in listed order:
NS.3DILLUSION.COM198.109.162.43
METS.TCI.EAST-LANSING.MI.US 198.109.160.2
SERV1.CL.MSU.EDU 35.8.2.41
However ...
bra
Hello all!
Just tried taking an external SCSI disk from one of our SparcStations
running Solaris 2.5.1 and connecting it up to my x86 Linux box. The
SCSI chain recognizes that a drive is there, but, I can't seem to mount
any of the partitions on the drive. It was suggested to me to use the
ufs f
On Fri, 14 Nov 1997, Paul Miller wrote:
: On 13 Nov 1997, Ben Pfaff wrote:
[ snip ]
:
: > BTW, why don't you add a Reply-To: header? There is no host
: > 3dillusion.3dillusion.com.
:
: damn.. I've had this problem since I installed BIND. My email address
: used to only include my domain by def
Thank you to everyone who has helped with this problem...
I got my laptop (with a cirrus logic GD7543 video chip and 800x600 TFT
LCD screen) to work in 800x600 mode using the VGA16 server. Works like a
charm, but of course it's only 16 colors.
When I switch the server to SVGA, the screen is shift
On Thu, 13 Nov 1997, clif smith wrote:
> OK I know this question will generate subjective answers but
>
Well, if you are looking for a book to help with installing and
understanding the Debian distribution, you could try my new book. (that is
about as subjective as I can get ;-)
Check out www.l
On Fri, 14 Nov 1997, Bill Moran wrote:
> Hi
>
> I am (still) trying to get olvwm to work under debian. When I run
> /usr/bin/X11/olvwm, I receive the message
>
> Cannot connect to (NULL DISPLAY)
>
>
> I have a .DISPLAY file in my home directory with
>
> :0.0
>
>
> in it. When I type "e
Dale Martin wrote:
>
> Daniel Mashao <[EMAIL PROTECTED]> writes:
> > why not put /var and /tmp in the same root partition?
>
> When you run out of space on your root partition while compiling, it's a
> real pain. I've had it happen. I've never run out of space on /var, or on
> / if I don't have
According to Behan Webster:
> > > Sun Nov 9 14:01:48 EST 1997: Running: squid -D -s -f /etc/squid.conf >>
> > > /var/log/squid/squid.out 2>&1
> > > /usr/lib/squid/RunCache: line 38: 337 IOT
> > > trap/Abort
> > > squid -D -s $conf 1>&3 2>&3
> >
> I was running the
Daniel Mashao wrote:
>
> On 14 Nov 1997, Dale Martin wrote:
>
> > Philippe Troin <[EMAIL PROTECTED]> writes:
> >
> > > This is a lot of space wasted unless you have large spool directories
> > > (news/mail). For a reasonable single-user station, 64MB should be
> > > largely enough on /var. /tmp i
Daniel Mashao <[EMAIL PROTECTED]> writes:
> why not put /var and /tmp in the same root partition?
When you run out of space on your root partition while compiling, it's a
real pain. I've had it happen. I've never run out of space on /var, or on
/ if I don't have /tmp on it. So, I have /tmp soft
IIRC there is a TeTeX HOWTO that says it is meant to fill in some of the
information thats supposed to be in the often non-existent local guide.
Of course it can't supply info on where all the files are stashed on your
local system, but I, like Dale, am about to set off down the Latex path
and
On 14 Nov 1997, Dale Martin wrote:
> Philippe Troin <[EMAIL PROTECTED]> writes:
>
> > This is a lot of space wasted unless you have large spool directories
> > (news/mail). For a reasonable single-user station, 64MB should be
> > largely enough on /var. /tmp is left to your choice (16 is a good
On 14 November 1997, Sten Anderson <[EMAIL PROTECTED]> wrote:
> Another workaround is:
>
> cp /home/USER/.Xauthority /root/
Or to set XAUTHORITY to point to the user's .Xauthority. I've done this
with my "xterm -e root", and it works pretty well (unfortunately I
can't tell you how exactly I
Right after I installed postgres 6.2.1 and played with is a little I
can't log into my LINUX anymore. Everything goes on as usual until it
reaches:
INIT: entering runlevel: 2
Then it differs from what it used to do, which is start the various
daemons
Now it says: Debian Linux 1.3 (none) tty1
(none)
>
> Have you ran badblocks on /dev/hda4 ?
Thats what was reporting the error
>
> Salutacions, Pere __o mailto:[EMAIL PROTECTED]
> 2:343/108.91 - _`\<;_ http://casal.upc.es/~pere/
> PGP key available --- (_)/ (_)"Lo importante es el conce
Paul Miller <[EMAIL PROTECTED]> writes:
>
> On 13 Nov 1997, Ben Pfaff wrote:
>
> > You can turn off this security by typing `xhost +localhost' at an
> > xterm prompt; thenceforth during that X session any user on the local
> > computer will be able to run clients.
>
> hmm.. I'll try that, maybe t
Philippe Troin <[EMAIL PROTECTED]> writes:
> This is a lot of space wasted unless you have large spool directories
> (news/mail). For a reasonable single-user station, 64MB should be
> largely enough on /var. /tmp is left to your choice (16 is a good
> number).
I would find 16M for /tmp WAY to
Alfredo Todini <[EMAIL PROTECTED]> writes:
> I have two disks: a 1Gb disk, with Windows 95, and a 2GB disk, with
> Linux. Now I need to replace Windows 95 with Windows NT. I read the
> Linux+NT mini-HOWTO, and it suggests to install Linux after NT. However
> I absolutely cannot destroy or damage my
Stephen Zander <[EMAIL PROTECTED]> writes:
> Sorry for being so slow.
No problem. You did disprove my theory of mine however. Normally, when I
post to this list, if I don't get a response within 15 minutes one never
comes. :-)
> Did either of you add the /usr/i486-linuxlibc1 fix? There was a b
On "Fri, 14 Nov 1997 13:00:07 +0100." Santiago Vila Doncel wove together:
[snip]
[> It may be worth to know that magicfilter supports .dvi format, so if you
[> have magicfilter installed, you can even do:
[>
[> cat whatever.dvi | lpr
Or even more simply: 'lpr whatever.dvi'
--
The AtticKeeper: Rev
On Fri, 14 Nov 1997 10:24:10 -0200 Otavio Exel ([EMAIL PROTECTED]
br) wrote:
> - are symlinks really fast?
Quite, except on NFS. You really should worry about it unless you're
a performance freak.
> - I read somewhere that "500mb for /var and /tmp" is fine;
> what exactly does that mean? two
I have two disks: a 1Gb disk, with Windows 95, and a 2GB disk, with
Linux. Now I need to replace Windows 95 with Windows NT. I read the
Linux+NT mini-HOWTO, and it suggests to install Linux after NT. However
I absolutely cannot destroy or damage my Linux partition; is it possible
to install NT with
On 14 Nov 1997 11:46:46 +0100 Ole =?iso-8859-1?Q?J=F8rgen?= Tetlie
([EMAIL PROTECTED]) wrote:
> I upgraded some packages to unstable yesterday, and now xdm
> dies, restarts, dies, restarts, dies, ... so I can't log on
> to fix it (I probably removed the old libX, while xdm is still
> linked to i
hi everybody,
I'm re-thinking my HD partitioning and would apreciate some advice!
- are symlinks really fast?
- I read somewhere that "500mb for /var and /tmp" is fine;
what exactly does that mean? two partitions summing up 500mb?
one 500mb partition and symlinks from /var and /tmp?
- why i
-BEGIN PGP SIGNED MESSAGE-
On Thu, 13 Nov 1997, joost witteveen wrote:
> First LaTeX it, to create the .dvi. Then for a postscript printer:
> dvips file
> to print it directly to the printer, or
> dvips file -o
> to create the .ps file.
It may be worth to know that magicfilter suppor
hi everybody,
I see all dselect stuff live in /var/lib/dpkg; I'd say /var is not a
safe place to keep such important stuff; any opinions?
now some questions:
- what files should I backup from /var/lib/dpkg to be able to resume
using dselect in case of crash in /var?
- is there a program that
[Please CC any replies to me]
Hi,
I upgraded some packages to unstable yesterday, and now xdm
dies, restarts, dies, restarts, dies, ... so I can't log on
to fix it (I probably removed the old libX, while xdm is still
linked to it!). Is it possible to disable xdm from lilo, or boot
in any other w
I tried 2.0.31, but found that it broke my SCSI system - it would no longer
acknowledge the existence of tapedrive or scanner. This was apparent at
boot-time, when they no longer appeared on the SCSI device list.
I am using an Adaptec 2940UW with the aic7xxx SCSI kernel code.
I wanted this kerne
On Fri, Nov 14, 1997 at 09:25:45AM +0100, Kevin Traas wrote:
> I just heard on BugTraq that there's now a bugfix available for Linux
>
> Anyone heard of it or where it might be obtained?
It's in the latest 2.1.63 kernel, and hopefully will be integrated in
2.0.32...
Later,
olive
--
On Thu, Nov 13, 1997 at 11:48:38PM +, G. Kapetanios wrote:
> I have compiled a 2.0.31 kernel. One of the reasons for doing so was to
> use autofs. However when I did make menuconfig I didn't see an option for
> autofs support. I thought it was in the kernel anyway and instaled he
> package. How
I just heard on BugTraq that there's now a bugfix available for Linux
Anyone heard of it or where it might be obtained?
For those that are wondering what I'm talking about
http://support.intel.com/support/processors/pentium/ppiie/index.htm
Regards,
Kevin TraasBaan
"Michael Jinks" <[EMAIL PROTECTED]> writes:
[snip]
> end_request: I/O error, dev 02:00, sector 0
> VFS: Cannot open root device 02:00
> Kernel panic: VFS: Unable to mount root fs on 02:00
>
> This looks to me like a media error, but I've tried two different copies
> of the root filesystem floppy
I have the exact same problem too. I purchaced the CD from LSL afterwards
and installed DUNC. For some reason at the end of the configuration proccess
I get a message: "Error Executing command" I read the Related HOW To's and
I'm still confused.
If it's okay with steve, Could you please cc.
I have the same chipset (CL754x). If you look at the X11 readme files
they mention that no-one is working on the chipset so they cannot
guarantee or fix bugs. I also have similar problems.
//
Daniel J. Mashao --
[EMAI
OK I know this question will generate subjective answers but
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
Thank you all for the response! And, yes, Dwarf, I have your new book &
I think it's a great help! Finally, something Debian specific! But I
have to admit, I'm still just trying to get my modem working in the base
(floppy install only) system. Do I have to MAKEDEV for my modem?
--
Steve Morrill
Will Lowe wrote:
>I'd like my system to come up running xdm or kdm. What is the proper
>place to do this? Right now I'm just logging in and doing "sudo kdm",
>but I've a feeling that there's probably a correct runlevel or something
>to do this in.
In /etc/X11/config, you need the line
On Thu, 13 Nov 1997 22:05:47 MST Rick Macdonald ([EMAIL PROTECTED])
wrote:
> The release notes for Communicator 4.04 say that Linux plugins only work
> with the dynamically linked version of Motif 1.2.
>
> Does lesstif provide this, and do plugins work?
Lesstif provides *source* compatibility
On Thu, 13 Nov 1997 23:27:48 GMT "Batista, M." ([EMAIL PROTECTED])
wrote:
> Know somebody set up the ISDN link to an ISP on demand?
> I make this link by hand, but when the hangup time out to come, the
> ISDN driver shutdown the link and i have to start
> up by hand once more.
Ha
Paul Miller <[EMAIL PROTECTED]> writes:
> Before installing BIND, the default mail domain was '3dillusion.com'.. now
> it is '3dillusion.3dillusion.com' ... I want to change it back, how can I
> do this?
If this is the named I get on 3dillusion.com, it's still not set up
right:
% dig @3dillusion
The release notes for Communicator 4.04 say that Linux plugins only work
with the dynamically linked version of Motif 1.2.
Does lesstif provide this, and do plugins work?
I recall that bash 2.0.1 (or was it 2.1?) is also required?
...RickM...
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail
I figured out a rough way to solve it, but I dont like it.
for each of the IP that they are allocated if i put an
IP IN NS ns1.domain.com
IN NS ns2.domain.com
into the reverse file for that class c it works because it looks to the
ns1 and ns2 .domain.com name se
Hi
I am (still) trying to get olvwm to work under debian. When I run
/usr/bin/X11/olvwm, I receive the message
Cannot connect to (NULL DISPLAY)
I have a .DISPLAY file in my home directory with
:0.0
in it. When I type "env" I cannot find a DISPLAY variable. How do I
set the variable fo
On 13 Nov 1997, Ben Pfaff wrote:
> Paul Miller <[EMAIL PROTECTED]> writes:
> > AUDIT: Thu Nov 13 23:27:51 1997: 975 X: client 3 rejected from local host
> > Auth name: MIT-MAGIC-COOKIE-1 ID: -1
>
> This sort of message generally means that someone not authorized to
> connect to your X server tr
Paul Miller <[EMAIL PROTECTED]> writes:
> AUDIT: Thu Nov 13 23:27:51 1997: 975 X: client 3 rejected from local host
> Auth name: MIT-MAGIC-COOKIE-1 ID: -1
This sort of message generally means that someone not authorized to
connect to your X server tried to connect anyway. Since the host was
the
On Thu, 13 Nov 1997, smorrill wrote:
> Ok, guys, I give...
>
> I have a base installation running from floppies (ver 1.3) on a 586
> sharing a hard drive with win95. Everything works as it should, so
> far. I'm trying to get ppp running so I can ftp the packages I need.
> I'm a real newbie to l
I'm using Debian/hamm ... and I'm trying to get xconsole to work.. it
works fine from the window manager menus, but won't run with xdm/kdm.. I
also noticed this other problem.. and I don't know what it means.
/var/log/xdm-errors:
AUDIT: Thu Nov 13 23:27:51 1997: 975 X: client 3 rejected from lo
Try specifying chipset clgd5436 in place of 754x. It worked
for me on a Gateway Solo2100 laptop with a 7548. Here's my
XF86Config:
# This file is derived from Gordon Chaffe's
([EMAIL PROTECTED]/Berkeley.EDU)
# web page
http://bmrc.berkeley.edu/people/chaffee/index.html#xfree86_cirrus
#
# This wo
I have a problem with a solution, in case someone else hits the same
problem. I also hope that someone can provide a fuller explanation of
the problem, since mine has a few gaps.
I installed Debian 1.1 on 12 September 1996, then reinstalled 1.3.1 on
9 August 1997 from Linux System Labs CDs. I tho
I used minicom fairly extensively when first setting up ppp. I think it
would be worth your time to download that perhapd from win 95 and install
it. Then you can check if your modem is installed right. Mine is on an
odd port and interrupt (I don't remember which now) but I never had to
worry a
On Thu, 13 Nov 1997, Dale Scheetz wrote:
> I have finally decided to learn Latex, so I bought Leslie Lamport's book
> and started reading ... but the first suggestion has been difficult to
> deal with. He suggests that there is a Local Guide to Latex that I should
> read to find out how to use the
Hi,
just tried to install netscape4
on my hamm system:
stas ~ # dpkg -i netscape4_4.0-6.deb
(Reading database ... 15923 files and directories currently installed.)
Unpacking netscape4 (from netscape4_4.0-6.deb) ...
dpkg: error processing netscape4_4.0-6.deb (--install):
subprocess pre-installat
You know that 'yacc' stands for Yet Another Compiler Compiler' don't you?
Don't know about you, but this scares me a little. However if you think
you are up to it or have something to contribute to WINE:
What you want are the GNU versions of lex and yacc, known I think as flex
and bison. Hope
>>"Drake" == Drake Diedrich <[EMAIL PROTECTED]> writes:
Drake> On Thu, 13 Nov 1997, Dale Scheetz wrote:
>> I have finally decided to learn Latex, so I bought Leslie
>> Lamport's book and started reading ... but the first suggestion
>> has been difficult to deal with. He suggests that there is
> On Wed, 12 Nov 1997, Jameson Burt wrote:
>
> : After upgrading ldso, libc6 and several other packages, several packages
> : failed to work, responding "segmentation violation",
> :xv, xfig, xephem
> : The cause of this was my setting of LD_LIBRARY_PATH in .bashrc.
> : I had used this
Ok, guys, I give...
I have a base installation running from floppies (ver 1.3) on a 586
sharing a hard drive with win95. Everything works as it should, so
far. I'm trying to get ppp running so I can ftp the packages I need.
I'm a real newbie to linux, and I'm not understanding the setup process
I'm new to this list and new to Debian -- I've been using RedHat for
about the past two months though. Before that I was very nearly
Unix-free.
A brief comb through the archives didn't turn up anything that looked
like it pertained to my problem; if you know better, just let me know
and maybe poi
The mail2news portion of newsgate works perfectly for me. Unfortunately
that is not the case for news2mail. I had a feeling that my posts to
debian.user (my local store of debian-user) weren't going out to the list. So
I tried running news2mail (as root) and fed it a message like this:
stasis#
Almost exactly the same thing is happening to my machine. I n case
FVWMButtons does not terminate. It has starrted happening after I
upgradeed to 3.3.1-1
George
On Thu, 13 Nov 1997, Brian M. Rectanus wrote:
> >
> > For some reason processes are not being termi
94 matches
Mail list logo
