I cant get sound from audio cd using XMMS. If I enable the cdaudio input plugin I can see the tracks listed in the "load file" window when I select play-file,but no sound. When
cdaudio is deselected and cdread is enabled and I select play-file, no tracks from cd
are shown in the "load file" wi
Quoting gm c <[EMAIL PROTECTED]>: > I cant get sound from audio cd using XMMS. If I enable the cdaudio > input plugin I can see the tracks listed in the "load file" window when > I select play-file,but no sound. When > cdaudio is deselected and cdread is enabled
I have a g3pb with deb 3.0. I downloaded kernel 2.4.20. Configured a pmac
kernel. I downloaded patch 2.4.21. When patch p0 < patch-2.4.21 is finished
my make file says it is 2.4.20. I dont have config.in.rej but I do have
defconfig.rej. It list a couple of items with a + or - to the left but I
I figured out the answer to why I couldnt apply the patch to my kernel--
I had been trying to patch the file in /usr/src/linux-2.4.20 that I had made
several ppc kernels from.
What I did that worked was to backup the dir linux-2.4.20 to linux20-bak,
then unzip the kernel package again at /usr/sr
before I change my pmud control for time to begin sleep (pmud -K -l 200 -m
15) I would like to be able
to read what the values are first (what file do I read ) . I also dont
understand where to read or set whether power savings is at minimum, medium,
maximum.
__
My pwerbook boots to gdm login. Immediatly before that screen the message
says :
#start gdm
#do not start xdm
#do not start kdm
At this time the powerbook beeps three times. one high tone- one lower tone-
one high tone.
fairly quickly.
I want to stop the beeps.
I was trying to find the lines th
I have a g3 powerbook -firewire (pismo).
I would appreciate someone explain to me how to find or determine the proper
terms to use when associating a module to something the kernel will
recognize.
example: for my powerbooks ethernet hardware- how do I know that it should
be :
alias eth0 gmac
o
I have a g3 powerbook-pismo. I read somewhere the codes 97 and 100 (I think) for fn+alt and fn+ctl which I prefer over 86 and 87- f11 and f12. I was wondering how 97 and 100 were determined sinse when I use the fn+ anything showkey does not print anything.
Also -- what "environment variable" does
On Wed, Oct 01, 2003 at 12:56:11PM -0700, gm c wrote:
> example: for my powerbooks ethernet hardware- how do I know that it should
> be :
> alias eth0 gmac
Use this, because the device name is eth0. Though I prefer to use
discover, and just let it load the sungem driver at boot.---Is
To: debian-powerpc@lists.debian.org
Subject: Power management support in ALSA PowerMac audio driver?
From: [EMAIL PROTECTED] (Derrik Pates)
Date: Thu, 2 Oct 2003 09:32:59 -0400
Message-id: <[EMAIL PROTECTED]>
Old-return-path: <[EMAIL PROTECTED]>
User-agent: Mutt/1.3.28i
I've recently acqu
Is "alias usb storage usb-storage" the correct wording for modules.conf for the module usb-storage.o to be loaded when a storage device is plugged into the usb connection??? If not what???
Do you Yahoo!?
Exclusive Video Premiere - Britney Spears
I bought 3.0r0 soon after it came out. I never noticed until yesterday that when I apt-cdrom the cdroms are listed in sources.list as unstable. Why is that?
I have been reading how to setup apt sources and preferences for using stable and testing (or testing and unstable). How do I use the cdroms p
I am unable to get my airport card to connect to a wireless base
station. I am using /etc/network/interfaces.
iface eth1 inet dhcp
wireless-essid myessid
wireless-mode managed
wireless-key mykey
wireless-ap myap
when I iwconfig eth1 the ap is all 4's or all 0's. If I iwconfig
essid, mode, k
-
> > >
> > > when I iwconfig eth1 the ap is all 4's or all 0's. If I
> iwconfig
> > > essid, mode, key, and ap the ap is not get recognized.
> > > what am I missing???
I am not using extreme card, but orig. I am loading airport module.
modprobe airport --which also loads orinoco and yenta-socket
> On my system (Pismo g3 iBook 600) my airport card is eth0, eth1 is
> my
> ethernet port.
> I never used iwconfig, simply set the options I posted previously,
> directly
> in /etc/network/interfaces, then ran
> ifdown eth0
> ifup eth0
>
> Isn't wireless-ap for an access point? If you're only
>
> >
> > On Sep 7, 2005, at 5:47 AM, Matthias Grimm wrote:
> >
> > > If you don't use the Apple base station you have to disable
> encrypted
> > > communication in the acces point, because the original Apple
> Airport
> > > card only supports 40Bit WEP which is not longer supported by
> rece
I tried the live cd with the same results as my installed sys. I do
not get connected and when I use iwconfig the ap is not recognized.
My boot message /var/log/dmesg
eth1: station 001f:0001:0008:0026
: lucent/agere firmware v8.4
: ad-hock supported 104bit key
:mac 00:10:c6:66:75:8b
The question of the encription key has been brought up. I have
connected to the ap (base station) with the card using os9. The card
and ap should work with linux.
As I understand, when the module(s) for the airport card are
installed I can iwconfig in a terminal and see the essid and key etc.
for
I am using unstable. I cannot login as a user, can as root. I was
getting pam_start errors and I copied some files to /etc/pam.d that
had dpkg-dist at the end of their names. I dont get the errors any
more but the login for user fails. Dont know if it is a different
problem but I get a error mess
--- Moritz Armingeon <[EMAIL PROTECTED]> wrote:
> Hi mike
>
> On 13:24 Mon 24 Jan , gm c wrote:
> > I am using unstable. I cannot login as a user, can as root. I was
> > getting pam_start errors and I copied some files to /etc/pam.d
> that
> > had dp
I was wondering if it is now possible to record from the mic or linein on the powerbook G3 pismo? If so , how?
mike
Celebrate Yahoo!'s 10th Birthday!
Yahoo! Netrospective: 100 Moments of the Web
I have g3 powerbook with debian unstable and 2.6.10.
I can modprobe snd-powermac and a bunch of modules load. I then run
xmms with alsa and play a file ok. After removing sound modules-
I put alias snd-card-0 snd-powermac in /etc/modprobe.d/alias and/or
/etc/modutils/sound (run update-modules) and
I would like to load sound module (snd-powermac or dmasound_pmac)
when I atempt to play a sound file rather than on bootup. My google
search has given me information that I have tried with no success. Is
there anyone that is able to load sound module on demand that can
tell me there configuration
It is my understanding that modules will auto load with an
appropriate alias in /etc/modprobe.d/alias for 2.6.x. I have not
been
able to get snd-powermac to load when I use xmms to play sound. Any
ideas?
mike
Yahoo! Mail
Stay connected, organized, and protected. Take the
I tried your /etc/modprobe.d/sound file with alias sound-slot-0
snd-powermac.
It doesnt auto load the module when I open xmms to play a sound file.
I does load it on bootup which is strange.
mike
--- Tommy Trussell <[EMAIL PROTECTED]> wrote:
> On 5/7/05, Tommy Trussell <[EMAIL PROTECTED]> wrote:
My question (concern) is of auto loading not auto unloading.
I too hope someone knows something about this and responds.
mike
--- Tommy Trussell <[EMAIL PROTECTED]> wrote:
> On 5/9/05, gm c <[EMAIL PROTECTED]> wrote:
> > I tried your /etc/modprobe.d/sound file with alias
my yaboot is 1.3.13-3
at boot:
I can boot a configured kernel like
boot:hd:12,/vmlinux-c
An installed kernel boots ok if I put the label vmlinux after the
boot: from the yaboot.conf file.
image=/vmlinux
label=vmlinux
root=/dev/hda12
initrd=initrd.img
It will not boot with
boot:hd:12,/vmlinux
I want to use gconfig, I found info saying I needed gtk+ which means(
libgtk2.0, libglib2.0, libgdk2.0) installed. I had 1.2 of these libs
installed but it still wouldnt work. So, I installed 2.0. gconfig now
tries to run but it stops after errors like GTk-critical: file
gtklocaland Glib-Gobje
I have debian on powerbook g3 pismo with woody. I want to try a 2.6 kernel. I downloaded it. When I run make vmlinux I get error that binutils needs to be greater than 2.12.1, but when I dpkg -l binutils I get version 2.12.90- . Seems to me it should work??
For the packet people---what 2.6 kernel
I have a g3 powerbook firewire. I have been configuring kernels (not
the deb way though) with out problems on stable. I am trying an
unstable install and want to use a 2.4.x and 2.6.x kernel.
Errors I getconfiguring a 2.4.25: When I make xconfig it quits with
error -make: wish:command not found.
W
--- simon raven <[EMAIL PROTECTED]> wrote:
> On sam, 2004-04-17 at 12:07 -0700, gm c wrote:
> > I have a g3 powerbook firewire. I have been configuring kernels
> (not
> > the deb way though) with out problems on stable. I am trying an
> > unstable install and want t
31 matches
Mail list logo
