2.4.1 (w/smp) rsynced (?is that a verb?) from fsm labs seems to compile
and run fine over a potato base w/gcc 2.95.2 and libc6 2.1.3-13. Needed
to update ppp to 2.4.0f-1. This is on an Oldworld S900 - 604eX2 dual
booting via quik. Hybrid Debian Potato Base & Developement .debs + X
4.0.2 from source
to get your keymap working, uncomment the lines under powermac in
/etc/X11/XModmap and add "exec xmodmap /etc/X11/Xmodmap &" to your
.xinitrc file. I emulate a three button mouse by passing
"adb_buttons=103,55" to the kernel at boot (via quik or BootX) which
uses the command key as button two and F
Andre,
With my setup, just pressing the command key is equivalent to depressing
the second button of the mouse - no mouse click required. Very few, if
any, X apps that I use map anything to the command key, whereas many use
control and option. You can pass the keycode for any key you wish to the
k
quik to boot into debian
command-option-o-f at boot to enter OF if your output-device is set
correct then bye to boot from the MacOS selected in your Startup disk
control panel or boot to continue booting Debian from disk
Mac should have two partitions (one per system folder), although there
is a
Try putting the kernel in a folder name "Linux Kernels" in your System
Folder, or in a folder with the same name next to the BootX App. The
ramdisk.image.gz can be put anywhere and selected under the options
button on either the app or extension. You need the kernel to boot,
although I've had no lu
I am using a 4mb imstt128 on a dual processor s900 (same motherboard as 9500). I
can get up to 1600x1200 with the fbdev or 1280x1024 with the imstt driver -
both at 16 bit color depth. The relevant section of my XF86Config-4 is:
Section "Device"
Identifier "imstt128mb"
BusID
I think the 9500 is like my s900 in that it relies on a PCI card for video. I
also think that the original poster said he was using an IMS TwinTurbo 4MB card.
I have success with my machine by setting the OF ouput-device to
/bandit/IMS,tt128mb. You can use an 8MB card with /bandit/IMS,tt128mb8, but
On Thu, Dec 06, 2001 at 08:52:59AM +, Wayne Pascoe wrote:
> Chris Tillman <[EMAIL PROTECTED]> writes:
>
> Partition 6 has never been the root partition. Partition 6 is my MacOS
> HFS partition with OSX installed on it.
>
> > What's happening is what quik is warning you about when you run it.
> Is there anything I can do at this point besides opening up the case and
> twiddling the bits with my tongue?
>
My oldworld machine's OF (1.0.5) defaults to using a serial console for output.
If you have a MacOS boot source - i.e. cd or hard drive partition or disk tools
floppy - you can reset
On Thu, Dec 13, 2001 at 10:44:07AM -0500, Michael Dartt wrote:
> Machine: Performa 6400/180, Open Firmware version 2.0
>
> Here's the wall I'm running into: OF keeps telling me "CLAIM failed" when I
> try
> entering "BOOT". "Linux" gets "linux, unknown word". Right before the
> prompt,
> th
10 matches
Mail list logo
