The question of the encription key has been brought up. I have
connected to the ap (base station) with the card using os9. The card
and ap should work with linux.
As I understand, when the module(s) for the airport card are
installed I can iwconfig in a terminal and see the essid and key etc.
for
I tried the live cd with the same results as my installed sys. I do
not get connected and when I use iwconfig the ap is not recognized.
My boot message /var/log/dmesg
eth1: station 001f:0001:0008:0026
: lucent/agere firmware v8.4
: ad-hock supported 104bit key
:mac 00:10:c6:66:75:8b
>
> >
> > On Sep 7, 2005, at 5:47 AM, Matthias Grimm wrote:
> >
> > > If you don't use the Apple base station you have to disable
> encrypted
> > > communication in the acces point, because the original Apple
> Airport
> > > card only supports 40Bit WEP which is not longer supported by
> rece
> On my system (Pismo g3 iBook 600) my airport card is eth0, eth1 is
> my
> ethernet port.
> I never used iwconfig, simply set the options I posted previously,
> directly
> in /etc/network/interfaces, then ran
> ifdown eth0
> ifup eth0
>
> Isn't wireless-ap for an access point? If you're only
-
> > >
> > > when I iwconfig eth1 the ap is all 4's or all 0's. If I
> iwconfig
> > > essid, mode, key, and ap the ap is not get recognized.
> > > what am I missing???
I am not using extreme card, but orig. I am loading airport module.
modprobe airport --which also loads orinoco and yenta-socket
I am unable to get my airport card to connect to a wireless base
station. I am using /etc/network/interfaces.
iface eth1 inet dhcp
wireless-essid myessid
wireless-mode managed
wireless-key mykey
wireless-ap myap
when I iwconfig eth1 the ap is all 4's or all 0's. If I iwconfig
essid, mode, k
my yaboot is 1.3.13-3
at boot:
I can boot a configured kernel like
boot:hd:12,/vmlinux-c
An installed kernel boots ok if I put the label vmlinux after the
boot: from the yaboot.conf file.
image=/vmlinux
label=vmlinux
root=/dev/hda12
initrd=initrd.img
It will not boot with
boot:hd:12,/vmlinux
My question (concern) is of auto loading not auto unloading.
I too hope someone knows something about this and responds.
mike
--- Tommy Trussell <[EMAIL PROTECTED]> wrote:
> On 5/9/05, gm c <[EMAIL PROTECTED]> wrote:
> > I tried your /etc/modprobe.d/sound file with alias
I tried your /etc/modprobe.d/sound file with alias sound-slot-0
snd-powermac.
It doesnt auto load the module when I open xmms to play a sound file.
I does load it on bootup which is strange.
mike
--- Tommy Trussell <[EMAIL PROTECTED]> wrote:
> On 5/7/05, Tommy Trussell <[EMAIL PROTECTED]> wrote:
It is my understanding that modules will auto load with an
appropriate alias in /etc/modprobe.d/alias for 2.6.x. I have not
been
able to get snd-powermac to load when I use xmms to play sound. Any
ideas?
mike
Yahoo! Mail
Stay connected, organized, and protected. Take the
I would like to load sound module (snd-powermac or dmasound_pmac)
when I atempt to play a sound file rather than on bootup. My google
search has given me information that I have tried with no success. Is
there anyone that is able to load sound module on demand that can
tell me there configuration
I have g3 powerbook with debian unstable and 2.6.10.
I can modprobe snd-powermac and a bunch of modules load. I then run
xmms with alsa and play a file ok. After removing sound modules-
I put alias snd-card-0 snd-powermac in /etc/modprobe.d/alias and/or
/etc/modutils/sound (run update-modules) and
I was wondering if it is now possible to record from the mic or linein on the powerbook G3 pismo? If so , how?
mike
Celebrate Yahoo!'s 10th Birthday!
Yahoo! Netrospective: 100 Moments of the Web
--- Moritz Armingeon <[EMAIL PROTECTED]> wrote:
> Hi mike
>
> On 13:24 Mon 24 Jan , gm c wrote:
> > I am using unstable. I cannot login as a user, can as root. I was
> > getting pam_start errors and I copied some files to /etc/pam.d
> that
> > had dp
I am using unstable. I cannot login as a user, can as root. I was
getting pam_start errors and I copied some files to /etc/pam.d that
had dpkg-dist at the end of their names. I dont get the errors any
more but the login for user fails. Dont know if it is a different
problem but I get a error mess
I want to use gconfig, I found info saying I needed gtk+ which means(
libgtk2.0, libglib2.0, libgdk2.0) installed. I had 1.2 of these libs
installed but it still wouldnt work. So, I installed 2.0. gconfig now
tries to run but it stops after errors like GTk-critical: file
gtklocaland Glib-Gobje
--- simon raven <[EMAIL PROTECTED]> wrote:
> On sam, 2004-04-17 at 12:07 -0700, gm c wrote:
> > I have a g3 powerbook firewire. I have been configuring kernels
> (not
> > the deb way though) with out problems on stable. I am trying an
> > unstable install and want t
I have a g3 powerbook firewire. I have been configuring kernels (not
the deb way though) with out problems on stable. I am trying an
unstable install and want to use a 2.4.x and 2.6.x kernel.
Errors I getconfiguring a 2.4.25: When I make xconfig it quits with
error -make: wish:command not found.
W
I have debian on powerbook g3 pismo with woody. I want to try a 2.6 kernel. I downloaded it. When I run make vmlinux I get error that binutils needs to be greater than 2.12.1, but when I dpkg -l binutils I get version 2.12.90- . Seems to me it should work??
For the packet people---what 2.6 kernel
I bought 3.0r0 soon after it came out. I never noticed until yesterday that when I apt-cdrom the cdroms are listed in sources.list as unstable. Why is that?
I have been reading how to setup apt sources and preferences for using stable and testing (or testing and unstable). How do I use the cdroms p
Is "alias usb storage usb-storage" the correct wording for modules.conf for the module usb-storage.o to be loaded when a storage device is plugged into the usb connection??? If not what???
Do you Yahoo!?
Exclusive Video Premiere - Britney Spears
To: debian-powerpc@lists.debian.org
Subject: Power management support in ALSA PowerMac audio driver?
From: [EMAIL PROTECTED] (Derrik Pates)
Date: Thu, 2 Oct 2003 09:32:59 -0400
Message-id: <[EMAIL PROTECTED]>
Old-return-path: <[EMAIL PROTECTED]>
User-agent: Mutt/1.3.28i
I've recently acqu
On Wed, Oct 01, 2003 at 12:56:11PM -0700, gm c wrote:
> example: for my powerbooks ethernet hardware- how do I know that it should
> be :
> alias eth0 gmac
Use this, because the device name is eth0. Though I prefer to use
discover, and just let it load the sungem driver at boot.---Is
I have a g3 powerbook-pismo. I read somewhere the codes 97 and 100 (I think) for fn+alt and fn+ctl which I prefer over 86 and 87- f11 and f12. I was wondering how 97 and 100 were determined sinse when I use the fn+ anything showkey does not print anything.
Also -- what "environment variable" does
I have a g3 powerbook -firewire (pismo).
I would appreciate someone explain to me how to find or determine the proper
terms to use when associating a module to something the kernel will
recognize.
example: for my powerbooks ethernet hardware- how do I know that it should
be :
alias eth0 gmac
o
My pwerbook boots to gdm login. Immediatly before that screen the message
says :
#start gdm
#do not start xdm
#do not start kdm
At this time the powerbook beeps three times. one high tone- one lower tone-
one high tone.
fairly quickly.
I want to stop the beeps.
I was trying to find the lines th
before I change my pmud control for time to begin sleep (pmud -K -l 200 -m
15) I would like to be able
to read what the values are first (what file do I read ) . I also dont
understand where to read or set whether power savings is at minimum, medium,
maximum.
__
I figured out the answer to why I couldnt apply the patch to my kernel--
I had been trying to patch the file in /usr/src/linux-2.4.20 that I had made
several ppc kernels from.
What I did that worked was to backup the dir linux-2.4.20 to linux20-bak,
then unzip the kernel package again at /usr/sr
I have a g3pb with deb 3.0. I downloaded kernel 2.4.20. Configured a pmac
kernel. I downloaded patch 2.4.21. When patch p0 < patch-2.4.21 is finished
my make file says it is 2.4.20. I dont have config.in.rej but I do have
defconfig.rej. It list a couple of items with a + or - to the left but I
Quoting gm c <[EMAIL PROTECTED]>: > I cant get sound from audio cd using XMMS. If I enable the cdaudio > input plugin I can see the tracks listed in the "load file" window when > I select play-file,but no sound. When > cdaudio is deselected and cdread is enabled
I cant get sound from audio cd using XMMS. If I enable the cdaudio input plugin I can see the tracks listed in the "load file" window when I select play-file,but no sound. When
cdaudio is deselected and cdread is enabled and I select play-file, no tracks from cd
are shown in the "load file" wi
31 matches
Mail list logo
