On Fri, Apr 28, 2006 at 04:27:25PM +0200, Paul Brossier wrote:
> Hi all,
>
> I haven't been able to record from the microphone of this ibook g4 since
> at least 2.6.14 and up to 2.6.17-rc3.
can anyone confirm this? it used to work before iirc.
cheers, paul
[EMAIL PROTECTED]
Hi all,
I haven't been able to record from the microphone of this ibook g4 since
at least 2.6.14 and up to 2.6.17-rc3. I don't think i missed any alsa
mixer settings. I just get a higher level of noise when i switch from
line to mic. Is this a know issue?
cheers, piem
--
To UNSUBSCRIBE, email
On Fri, Nov 25, 2005 at 10:07:39AM +0100, Jorge Salamero Sanz wrote:
> hi all
>
> i've problems with alsa in my ibook2.2 since i upgraded to 2.6.14.2. i can't
> listen anything after a wakeup. this is the mplayer output:
>
> [AO OSS] audio_setup: Can't open audio device /dev/dsp: Device or resou
Hi,
(retitling to avoid polluting the good news too much :-)
On Wed, Nov 09, 2005 at 03:25:03PM +1100, Dean Hamstead wrote:
> have you contacted the hospital yet about having your arm and
> leg removed?
i kind of missed the joke here. but no, fortunately not yet :-)
i guess you meant they would
On Tue, Nov 08, 2005 at 06:01:56PM +0100, Johannes Berg wrote:
> Hi,
>
> Yesterday, the free driver for the first time received data. It was
> obviously a version I had hacked up, but we spec'ed the remaining bits
> now. It only worked in PIO mode, but the b44 driver has pretty much the
> same DMA
On Tue, Nov 08, 2005 at 12:30:38PM +0100, Johannes Berg wrote:
> On Tue, 2005-11-08 at 08:25 -0300, Eduardo Trápani wrote:
> > The wireless card seems to be detected seomtimes before the ethernet
> > card in 2.6.12 and that breaks the /etc/network/interfaces
> > configuration. See the log below.
Hello,
On Wed, Nov 02, 2005 at 05:01:06AM +, Paul Brossier wrote:
> Hi,
>
> I have been trying to boot this PowerBook7,2 on 2.6.14, but it fails for
> me (see #336993), so maybe this got fixed since 2.6.12.
right, i can reproduce this on 2.6.14 too.
> When i boot on 2
On Wed, Nov 02, 2005 at 08:59:50AM +0100, Thomas Kühner wrote:
> Hey Admins
>
> How could this flood the list? Ugly!
like this, which i found in the headers of your mail (i erased the other one):
X-Spam-Checker-Version: SpamAssassin 3.0.3 (2005-04-27) on murphy.debian.org
X-Spam-Level: **
X-Spam
Hi,
I have been trying to boot this PowerBook7,2 on 2.6.14, but it fails for
me (see #336993), so maybe this got fixed since 2.6.12.
When i boot on 2.6.12, with the headphones on and the volume reasonnably
high, i can hear the hard drive crunching and the mouse movements in the
headphones.
If i
Hi,
On Mon, Oct 31, 2005 at 11:56:02AM +0100, Emanuele Olivetti wrote:
> What about using a live cd and smartmontools? I had a similar
> problem. Just 'smartctl -a /dev/hda' is enough to get lots of info
> about the status of the hd and its problems.
good idea.
> In my case few sectors died but
Hi,
On Mon, Oct 31, 2005 at 06:10:56PM +1100, Benjamin Herrenschmidt wrote:
>
> > so far, it looked to me like a hardware issue, but i found this thread:
> > http://lists.debian.org/debian-powerpc/2005/08/msg00182.html and i have this
> > line at boot time: 'hda: Enabling Ultra DMA 5' (shouldn't
hello,
i have had more and more problems in the last two months with the hard disk of
my ibook g4 (PowerBook6,5). it all started one morning, while reading emails,
after a few days uptime, heavy disc activity the day before. the system was
being more and more unresponsive. trying to quit mutt, it
Hi,
On Mon, Jun 13, 2005 at 12:40:39PM +0300, Panagiotis Papadopoulos wrote:
> Hello,
> I own a Powerbook 15'' and I want to install Linux on a partition of a LaCie
> external hard drive. Could please somebody tell me if this is possible with
> Debian or does Debian need to be installed in an inte
On Sun, Jun 12, 2005 at 01:34:27PM +0200, Federico 'Pain' Pistono wrote:
> I've installed the IBM jre as suggested by the ubuntu PPC guide.
which one?
there is at least 2 different jdk/jre from ibm, and the pseries will
install and run 'java -version' on a g4 but fail doing pretty much
anything
On Tue, Jul 12, 2005 at 07:54:54PM +0200, Klaus Ethgen wrote:
> Hello,
>
> Now I'm completely stuck. I tryed to install debian woody on a PowerBook
> G3. The think worked well until I tryed to boot the new OS. All I tryed
> did not help booting from the HD.
>
> The Technical:
> - PowerBook G3 (bl
On Fri, Jul 15, 2005 at 11:28:55PM +0200, Jose A. Ortega Ruiz wrote:
>
> hi. i'm using debian on a G4 iBook 12'' with a 2.6.11 kernel
>
> Linux imladris 2.6.11 #1 Thu Jun 30 11:10:09 CEST 2005 ppc GNU/Linux
>
> i've compiled the kernel myself, but just applied to debian's
> kernel-source the 'co
Hi,
On Fri, Jul 15, 2005 at 11:04:17PM +0200, Sven Luther wrote:
> Hello,
>
> I would like testers who want to test new powerpc kernels on ppc64 machines :
>
> These i have uploaded here :
>
>
> http://people.debian.org/~luther/ppc64/kernel-image-2.6.12-sven_1_powerpc.deb
>
> http://peopl
Hi,
thanks for your reply Sven.
On Fri, Jul 15, 2005 at 11:38:45PM +0200, Sven Luther wrote:
> On Wed, Jun 08, 2005 at 03:24:11AM +0100, Paul Brossier wrote:
> > On Tue, Jun 07, 2005 at 02:12:43PM +, Arnór Kristjánsson wrote:
> > > I installed this but the network doesn
On Sun, Jun 19, 2005 at 09:39:15AM -0700, Mike S wrote:
> OK, I don't know if this will work for you, but I managed to get OSS
> working in gnome by renaming esd, so that nothing would start the
> daemon, and switching Multimedia Sound Selector to OSS. For me that
> takes care of RhythmBox, a p
Hi,
On Mon, Jun 13, 2005 at 07:57:42PM +0200, Antoni Aloy wrote:
> Hello!
>
> I've recently purchased a PowerMac G2 dual processor, 1 Gb RAM, 250 Gb of HD
> with 20" flat screen.
>
> I'm trying to install debian or Ubuntu on it, but I get a kernel panic each
> time.
>
> It says:
> Oops: kerne
On Tue, Jun 07, 2005 at 02:12:43PM +, Arnór Kristjánsson wrote:
> I installed this but the network doesn't work. Any ideas?
strange, it worked for me on a powermac g5. isn't it one of these
uninorth one?
Sven, a few questions, sorry they all came in a row :-)
- could you enable GONFIG_PM72 i
On Tue, Jun 07, 2005 at 06:08:10PM +, Mike S wrote:
> Again I thank this list and the people in it for their help. After some
> tinkering around I finally got it to work, everytime after a reboot. I
> am not sure it is the best way, and no little to nothing about the rc
> scripts, but what
On Tue, Jun 07, 2005 at 04:02:26PM +, Mike S wrote:
> ok, I need to learn to quit whinning to the lsit, I apologize for that,
> I used chown :audio on the device, which is what I think you said it was
> right, and then I did a usermod -G on myself for the audio group, which
> should have add
On Mon, Jun 06, 2005 at 06:46:43PM +0100, Paul Brossier wrote:
> hi all,
>
> I have been trying to set up a decent config to run X on a Studio
> Display. I can get a 1280x1024 resolution by changing the hsync and
> vsync values as follow:
>
> Section "Monitor"
>
hi all,
I have been trying to set up a decent config to run X on a Studio
Display. I can get a 1280x1024 resolution by changing the hsync and
vsync values as follow:
Section "Monitor"
Identifier "Generic Monitor"
#HorizSync 28-50
#VertRefresh43-75
# n
On Fri, Jun 03, 2005 at 02:57:19PM +0200, Andreas Jochens wrote:
> On 05-Jun-02 23:03, Paul Brossier wrote:
> > I have also tried to install a pppc64 chroot as explained in
> > http://debian-ppc64.alioth.debian.org/READ_ME , but:
> >
> > sudo debootstrap --arch ppc64 \
Hi all,
Using a fresh sarge install on a Powermac 7,5, totem segfaults at start.
The error occur on 2.6.8-power4-smp (2.6.8-12) and 2.6.11-power4-smp
(2.6.11-2) but not on Sven's 2.6.11-pseries (2.6.11-2.ppc64.1).
here is what gdb has to say on 2.6.{8,11}
[Thread debugging using libthread_db en
On Fri, Jun 03, 2005 at 08:39:12AM +1000, Benjamin Herrenschmidt wrote:
>
> > i have just tried a daily sarge businesscard on a powerbook g5. the
> > installer
> > works just fine using the install-power4 option. I could also resize the
> > hpfs
> > partition using parted (from the command line,
On Fri, Jun 03, 2005 at 06:38:27PM +0200, Sven Luther wrote:
> On Thu, Jun 02, 2005 at 11:25:02PM +0100, Paul Brossier wrote:
> > On Sat, May 28, 2005 at 04:15:39PM +0200, Sven Luther wrote:
> > > Hello all,
> > >
> > > Thanks to the great job of Jeff Baile
On Wed, Jun 01, 2005 at 12:18:34AM -0700, Wesley Smith wrote:
> I'm using a G5. I can get to the yaboot menu, but no further. To get
> further, I have to edit yaboot.conf. Is there a way to access it from
> the menu? Otherwise, are there any other techniques besides using a
> live Ubuntu disc?
On Tue, May 31, 2005 at 11:30:45AM +0200, Jesus Climent wrote:
> Hi!
>
> Does anyone have a new powerbook and his FN key is not working?
>
> That is my case right now, and I dont know if it is a faulty keyboard or a
> missing driver.
in xev, can you see the keycode changing pressing F1 and fn+F1
On Thu, Jun 02, 2005 at 11:34:36PM +0200, Sven Luther wrote:
> On Sat, May 28, 2005 at 04:15:39PM +0200, Sven Luther wrote:
> > Hello all,
> >
> > Thanks to the great job of Jeff Bailey and Matthias Klose, who provided a
> > set
> > of gcc-3.4/glibc-2.3.5 based biarch toolchain, i have managed to
On Fri, Jun 03, 2005 at 08:40:11AM +1000, Benjamin Herrenschmidt wrote:
> > erm, after a bit of RTFMing and reading earlier threads in this list, i
> > start getting it. i have tried the multiarch kernel package from Sven.
> > (http://people.debian.org/~luther/ppc64/) it works nicely, except the
>
On Sat, May 28, 2005 at 04:15:39PM +0200, Sven Luther wrote:
> Hello all,
>
> Thanks to the great job of Jeff Bailey and Matthias Klose, who provided a set
> of gcc-3.4/glibc-2.3.5 based biarch toolchain, i have managed to build a first
> ppc64 kernel package, which is available at :
>
> http:/
On Thu, Jun 02, 2005 at 04:12:08PM +0100, Paul Brossier wrote:
> > first of all, how do i compile a ppc64, and what do i need to boot/use it? i
erm, after a bit of RTFMing and reading earlier threads in this list, i
start getting it. i have tried the multiarch kernel package from Sven.
oops, sent a bit too fast.
On Thu, Jun 02, 2005 at 04:01:00PM +0100, Paul Brossier wrote:
> i have just tried a daily sarge businesscard on a powerbook g5. the installer
> works just fine using the install-power4 option. I could also resize the hpfs
> partition using parted (from the com
On Thu, Jun 02, 2005 at 11:56:57AM +1000, Benjamin Herrenschmidt wrote:
> On Thu, 2005-06-02 at 00:15 +1200, Joel Van Velden wrote:
> > Hi everyone.
> >
> > I have an iMac G5 (first revision) and am trying to install debian on
> > it, but first i am wondering what is supported:
>
> I got one rec
Hi all,
Trying to reduce the latency of jack on my ibook G4, i realised i can go
down to 8.7ms using the oss mode, which is really good. But alsa won't
accept running with less than 22ms and click on most X request:
$ jackd -R -doss -r44100 -p128 -n3 -w16
works perfectly, 128*3/44100=8.7ms latenc
On Sat, May 14, 2005 at 01:45:39AM +0200, Wolfgang Pfeiffer wrote:
> Am I the only who got impressed?
No, I am also running a 2.6.12-rc4 and I found it very stable, with much
improvements over the 2.6.9+patch7. Software suspend and usb are no more
a problem, at worst all it takes is a hotplug rest
On Thu, Apr 21, 2005 at 03:16:49PM +0200, Colin Leroy wrote:
> On Thu, 21 Apr 2005 15:10:10 +0200
> Elimar Riesebieter <[EMAIL PROTECTED]> wrote:
>
> > Any hint?
>
> See my message from this morning. Patches are in -mm or at
> ftp://ftp.kernel.org/pub/linux/kernel/people/colin/patches/2.6.12-rc3
On Fri, Apr 22, 2005 at 10:50:34AM +0200, Elimar Riesebieter wrote:
> On Fri, 22 Apr 2005 the mental interface of
> Colin Leroy told:
>
> > On Thu, 21 Apr 2005 18:04:18 +0200
> > Elimar Riesebieter <[EMAIL PROTECTED]> wrote:
> > Checked it at home, it works for me. Can you try to invert pbbuttons
On Fri, Mar 25, 2005 at 01:38:27AM +0100, Daniel Kobras wrote:
> On Tue, Mar 22, 2005 at 08:36:01PM +0000, Paul Brossier wrote:
> > there is probably a better mean to do so though, ie checking what
> > type of conversion is needed according to libavcodec, but it does
> > eff
Hi,
On Tue, Mar 08, 2005 at 03:39:16PM +0100, Daniel Kobras wrote:
> On Mon, Feb 14, 2005 at 05:41:26PM +0100, Michael Schmitz wrote:
> > I can confirm the XV problem is the same old problem that a patch had
> > been posted for in http://jira.schirmacher.de/jira-kino/browse/KINO-76.
> > I've added
43 matches
Mail list logo
