Hi,
Is there a special patch, or a config to do to xserver to run 1680x1050
on a 20 inch cinema display?
I can not get more than 1280.
I'm running 2.4.27-powerpc-smp with a radeon 9700 Pro...
It's possible to use the dual head?
Thx
David
I have a systematic error trying to compile a Benh 2.4.25-1 from rsync.
d /usr/local/src/benh_kernel/debian/tmp-image/lib/modules/2.4.25-ben1;
\
mkdir -p pcmcia; \
find kernel -path '*/pcmcia/*' -name '*.o' | xargs -i -r ln -sf ../{}
pcmcia
if [ -r System.map ]; then /sbin/depmod -ae -F System
Thanks,
I think I find the problem... I have choose the wrong rtc configuration
(I choosed the emulation)
Cordialement
david
Le 24 févr. 04, à 03:38, Wolfgang Pfeiffer a écrit :
On Mon, 2004-02-23 at 18:10, David Ulrich wrote:
my config for 2.4.24-ben1:
<http://www.geocities.
When I compile the source on my 9500MP running 2.4.23 woody I have this
error:
make[2]: Leaving directory
`/usr/src/benH/src-linux-2.4-benh/arch/ppc/mm'
/usr/bin/make CFLAGS="-D__KERNEL__
-I/usr/src/benH/src-linux-2.4-benh/include -Wall -Wstrict-prototypes
-Wno-trigraphs -O2 -fno-strict-alias
in Herrenschmidt a écrit :
On Sat, 2004-01-10 at 12:55, David Ulrich wrote:
Hi,
I have a powerpmac 9500MP on debian 2.4.23. I install a radeon 7000
PCI. I build a kernel for it.
It works well with a vga display (Sony CPD200EST) on xfree and in the
console mode.
But I try to put an Apple studio d
Hi,
I have a powerpmac 9500MP on debian 2.4.23. I install a radeon 7000
PCI. I build a kernel for it.
It works well with a vga display (Sony CPD200EST) on xfree and in the
console mode.
But I try to put an Apple studio display 17 LCD on the DVI (with apple
adc to dvi adapter) and I have no s
0007)
Jan 2 18:20:33 daisy kernel: eth1: RealTek RTL8139 Fast Ethernet at
0xd501f000, 00:40:f4:50:f3:11, IRQ 27
Le 3 janv. 04, à 13:59, Michel Dänzer a écrit :
On Fri, 2004-01-02 at 20:09, David Ulrich wrote:
I try to install a radeon 7000 PCI on my Powermac, and the ADC to DVI
with a 17
Hi,
I have a woody 2.4.18 on my Powermac 9500 180MP. I install it on
ultra2wide scsi (2 drives) and I boot with quik. I have an ATI Rage 128
SE and it works fine. But my Display die a few days ago... it was a
VGA.
I have 2 Apple LCD displays but they are only in ADC or DVI (with apple
adapter
Hi,
I'm on a PowerMac 9500 with 2.4.18. When I launch KDE I have a
crash of sound system.
What should I do?
Thx
David
Hi,
It's possible to boot via bootx (or a floppy) to a CD of Debian? I want
to install debian on a scsi card but the kernel of floppy installer
does'nt see it.
Thx
David
The kernel I'm booting up is on the internal PMac scsi, it's old drives
(2x 1Go and 1x3Go) in scsi 50 pin.
Le lundi, 21 avr 2003, à 19:55 Europe/Zurich, Andreas Tobler a écrit :
David Ulrich wrote:
Thx for german (my german is bad too, but thx ;) next time I 'd learn
bett
re,
I plug the 2940UW(from apple G3B&W ) card in my PMac 9500MP, I try to
boot from the floppy, but the installer doesn't see the adaptec
card Now I make a new kernel with the AIC7 driver
(2.4.18-powerpc-smp).
It's possible to install a kernel from the built-in scsi to the 2940's
Hi,
My G3 B&W 450MHz (Rev 2) won't boot on the CD of debian installer. I
try "C" down on boot, but the G3 won't boot on it.
I try the OF too:
boot cd:,install\powermac\yaboot
or
boot cd:,\\:tbxi
but it can't found the device!?!?
What's wrong?
Thx
David
Hello,
It is possible to boot from a HD on a SCSI Adaptec 2940 with debian
2.4.18? I search the driver in the kernel source but I found nothing.
Thx
David
Hi,
I have a PowerMac 9500MP which run a debian 2.4.18 SMP kernel.
I want to know if I can install the linux on a HD on an Acard 6260M. I
can boot from it? Does the floppy linux installer see the HD on an
Acard 6260M?
It's difficult for me to change for another kernel, in cause of many
prob
Hello,
Does the Geforce 4ti work with debian powerpc?
Can I boot on debian powerpc on an acard ata 133?
Thx, Regards
David
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]
Hello,
I installed vncserver on my debian powerpc linux. I want to have gnome
instead of KDE trough vncclient? Which .conf file must I modify to do
it. Somebody told me about /.vnc/xstartup but I do^nt have xstartup in
my .vnc/ folder...
THx
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
wit
Hi,
I have a powermac 9500MP, on a debian 2.4.18 SMP. It's my webserver.
I put it on summertime and add a ntp server (ntp, ntp-simple and
ntpupdate). So the clock is always on time.
My debian is always on time now:
dulrich# date
Tue Apr 1 20:14:04 CEST 2003
But I can fix my hardware clock o
Le samedi, 8 mar 2003, à 10:45 Europe/Zurich, Ole-Egil Hvitmyren a
écrit :
David Ulrich wrote:
Hi,
Is there a dnetc app for RC5 prject on debian powerpc?
Thx
Whatcha mean "on debian powerpc"? The only place the dnetc client
should be downloaded is from distributed.org.
I am
Hi,
Is there a dnetc app for RC5 prject on debian powerpc?
Thx
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]
Hello,
Does the debian kernel support for the memory interleaving on a
PowerMac 9500? (2.4.18 SMP)
Thx
David
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]
Hi,
I compiled my kernel 2.4.18 with enhanced real time clock. It's on a
PowerPC 604e, PowerMac 9500MP bi 180MHz.
But it locks during the boot at:
"Setting the system clock using the hardware clock as reference..."
And during the shutdown at:
"Saving the system clock time to hardware clock..
Hello,
I try many insatlls, but all does that. I try YDL, linuxPPC, Debian
My 9500 boot with the first floppy, but wo'nt be installed witn the
second floppy, it does a kernel panic after the check machine, the same
as the YDL kernel panic:
I install YDL 2.1 on my PowerMac 9500MP 180 64MR
23 matches
Mail list logo
