More info,
# mt erase
# mt seek
/dev/tape: Input/output error
# mt status
SCSI 2 tape drive:
File number=-1, block number=-1, partition=0.
Tape block size 512 bytes. Density code 0x30 (AIT-1 or MLR3).
Soft error count since last status=0
General status bits on (101000
Hi,
I have a Sony AIT-1 tape backup unit (IDE) installed in a PowerMac
running debian/testing with a 2.6.8 kernel.
I have not had much success getting it to work :(
I have made a symlink from /dev/tape to /dev/nst0
I have the following in my /etc/modules.
ide-tape
ide-scsi
ide-cd
Hello,
> Recently, in this thread talked about the same problem you have now and
> the solution:
> http://lists.debian.org/debian-powerpc/2004/10/msg00322.html
Solution? Sorry, but I can't see the solution anywhere. Am I turning blind?
For example, here[1], at ends says:
'You shouldn't need to r
On Fri, Nov 05, 2004 at 12:12:01PM +0100, Colin Leroy wrote:
> On 05 Nov 2004 at 12h11, Domingo Fiesta Segura wrote:
>
> Hi,
>
> > What graphics card does the "PowerBook6,3" iBook G4 have? I've got a
> > "PowerBook6,5" iBook G4 but I don't remember the exact model (I'll check
> > this evening wh
On Sun, 07 Nov 2004 the mental interface of
Michel Dänzer told:
> On Sun, 2004-11-07 at 19:44 +0100, Elimar Riesebieter wrote:
> > On Sun, 07 Nov 2004 the mental interface of
> > Michel Dänzer told:
> >
> > > On Sun, 2004-11-07 at 17:50 +0100, Elimar Riesebieter wrote:
> > > >
> > > > is it poss
Hello grave,
On Thu, Nov 04, 2004 at 09:16:51AM +, grave wrote:
> As far as I know, debian doesn't already suport ppc64 but it defenitly
> run on G5 machines. I have here a dual G5 2GHz running perfectly
> (except sound) and I had also two Xserve G5 running a few days aga
Does this inclu
Ok, I've found out what outpput plugins were. I'm using Alsa Output
Plugin 0.9.7 with bmp and I still get no sound...
Can u help me?
Thanks!
> I've read that but, I can't compile it:
> [...]
> Configuration failed
> make: *** [config] Error 1
Recently, in this thread talked about the same problem you have now and the
solution:
http://lists.debian.org/debian-powerpc/2004/10/msg00322.html
If this isn't enough, you can search more informa
If you've installed from one of the latest Sarge's you can just copy
/boot/config-2.6.8-powerpc to your kernel source directory.
Also search for good debian kernel compile howto's There are a lot.
Op zaterdag 06 november 2004 01:25, schreef Isidoro Reyes de Zuloaga:
> Hi!
> Does anyone have the
I'm finally there. It weren't the modelines at all. I compiled the latest
kernel (2.6.9) with a correct radeonfb module and it works great now. A pure
driver problem. GLX and DRI are still on my list but this can wait.
If other have the same problem make sure to add this to your yaboot.conf:
ap
Ok,
I've read that but, I can't compile it:
[EMAIL PROTECTED]:~/linux-wlan-ng-0.2.1pre23$ make config
-- Linux WLAN Configuration Script -
The default responses are correct for most users.
Build Prism2.x PCMCIA Card Services (_cs) driver? (y/n) [y]: n
Build Prism2 PLX90
On Wed, Oct 27, 2004 at 03:42:48PM +1000, Benjamin Herrenschmidt wrote:
> Hi !
>
> This is an experimental patch against 2.6.9. It concerns the ATI based
> Aluminium PowerBook. The nVidia based ones aren't concerned at all, and
> the iBook G4 will have to wait a bit more for me to get the video wa
12 matches
Mail list logo
