On Mon, 2004-04-05 at 07:41, Jose Manuel dos Santos Calhariz wrote:
> I have an iBook with a CPU 750FX at 700MHz and a Radeon M6. When I
> try to run a kernel 2.6.x I don't get any text on the console. It can
> sleep and resume without problems, even with X11 running. Have anyone
> success runin
hi!
i have woody (gcc 2.95.4, binutils 2.12.90.0.1-4)
when i try to compile the new kernel i got:
make[1]: `arch/ppc/kernel/asm-offsets.s' is up to
date.
*** 2.6 kernels no longer buildcorrectly with old
versions of binutils.
*** Please upgrade your binutils to 2.12.1 or newer
make: *** [checkbi
Hi,
when I'm trying to run gnucash, the splash screen opens and displays
some information about loading modules. It then disappears, and the
program crashes with an "illegal instruction" signal.
This is on an iBook2.2 with an up-to-date Debian sid and a 2.6.4 kernel.
I searched around a little b
On Sun, Apr 04, 2004 at 05:41:18PM EDT,
Jose Manuel dos Santos Calhariz ([EMAIL PROTECTED]) wrote:
> I have an iBook with a CPU 750FX at 700MHz and a Radeon M6. When I
> try to run a kernel 2.6.x I don't get any text on the console. It can
> sleep and resume without problems, even with X11 runnin
I have an iBook with a CPU 750FX at 700MHz and a Radeon M6. When I
try to run a kernel 2.6.x I don't get any text on the console. It can
sleep and resume without problems, even with X11 running. Have anyone
success runing 2.6x kernel and have text on the framebuffer? I don't
have any problems w
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I have looked at many a Linux of Tibook install pages and I have not
found a clear answer to the current status of DRI/DRM support within
Xfree and the Kernel. I am running Debian Unstable on a TiBook IV.
Kernel version is 2.6.5, and I have XFree86 4
Le Mon, Apr 05, 2004 at 02:06:21AM +1000, Colin Charles a écrit :
>Even if I disabled udev, it wouldn't work. From /var/log/messages:
>
>Apr 5 02:02:51 hermione kernel: usb 1-1: new full speed USB device
>using address 3
>Apr 5 02:02:51 hermione kernel: scsi1 : SCSI emulation for USB Mass
>Storag
On Sun, Apr 04, 2004 at 12:28:26PM -0400, Ron Murray wrote:
> > 00:0e.0 Display controller: Integrated Micro Solutions Inc.:
> > Unknown device 9135 (rev 01)
> > Flags: medium devsel, IRQ 24
> > Memory at 8800 (32-bit, prefetchable)
> > Expansion ROM at 8184 [disabled]
>
>
>
On Mon, Apr 05, 2004 at 02:06:21AM +1000, Colin Charles wrote:
> Apr 5 02:02:51 hermione kernel: SCSI device sda: 256000 512-byte hdwr
> sectors (131 MB)
> Apr 5 02:02:51 hermione kernel: sda: unknown partition table
> Apr 5 02:0
Well, this might explain why Blender now seems to restart the X server
when I try to run it. PB G3 500 FW. Testing. Also saw those packages
in a recent upgrade. Anyone?
-jim
Mannequin* wrote:
Hi all, I have a PowerBook G3 400 Firewire running testing, and I
recently installed these packag
Brad Boyer wrote:
On Sun, Apr 04, 2004 at 04:24:57AM -0400, Ron Murray wrote:
I suspect the basic problem is that, since the on-board display in this
Mac has failed, I had to use the PCI display. Either the board is faulty
in some strange way (although it seems to work perfectly under MacOS),
o
Hi,
is it possible to get the second and third mouse key with shift or
control and the (first) mouse key? Is it possible to do this with xmodmap
for X?
I use more F1..F6 then brightness and volumn control. Is it possible to
interchange the behaviour with fn that f1 without fn is f1 and f1 with fn
On Mon, 2004-04-05 at 01:48, Kiko Piris wrote:
> > It would just reboot during boot-up, and it was a stock copy of your
> > .config. I'll make another post soon when it comes to 2.6.5, in the
> > meantime I'm giving 2.6.4 a try
>
> I would guess this is because you were using udev before trying mi
On Mon, 2004-04-05 at 01:25, Mathieu Segaud wrote:
Hi,
> Udev won't create fb nodes in /dev and X needs them to use fbdev.
> Nodes are not created as the kernel does not yet have sysfs support
> for fb drivers. You need them to create by hand or with
> /etc/udev/links.conf Marco added in his pack
On 05/04/2004 at 01:40, Colin Charles wrote:
> It would just reboot during boot-up, and it was a stock copy of your
> .config. I'll make another post soon when it comes to 2.6.5, in the
> meantime I'm giving 2.6.4 a try
I would guess this is because you were using udev before trying mine (as
I sa
On Mon, 2004-04-05 at 00:46, Kiko Piris wrote:
> > Tried the .config, but it didn't quite work for me either
>
> If you were a bit more specific, someone could try to help you...
It would just reboot during boot-up, and it was a stock copy of your
.config. I'll make another post soon when it com
Colin Charles <[EMAIL PROTECTED]> writes:
> Hi,
>
> Does anyone have a good .config for an iBook 2.2 to work with kernel
> 2.6.5? I've attached mine, and I notice that the screen is a bit weird
> in X - there are lines running thru it
>
> If it matters, I've installed module-init-tools, also have
On 05/04/2004 at 00:28, Colin Charles wrote:
> Tried the .config, but it didn't quite work for me either
If you were a bit more specific, someone could try to help you...
> I have vfat, the problem is that in 2.6.5, it get's detected as sg0 on
> scsi0, and when I try to mount /dev/sda1 its a no
On Sun, 2004-04-04 at 23:16, Kiko Piris wrote:
> > Does anyone have a good .config for an iBook 2.2 to work with kernel
> > 2.6.5? I've attached mine, and I notice that the screen is a bit weird
> > in X - there are lines running thru it
>
> I ussually put mine at:
>
> http://www.pirispons.net/b
On Sat, Apr 03, 2004 at 02:28:08AM +0200, Sven Luther wrote:
> On Thu, Apr 01, 2004 at 07:12:58PM +0200, Eric Deveaud wrote:
> > I tried the dailly buil from 03/28, 03/29, 03/30 and 03/31
> > none was abble either to boot from cd either to not hangs
>
> Yeah, i guess the yaboot on the CDs don't kn
On 04/04/2004 at 23:06, Colin Charles wrote:
> Does anyone have a good .config for an iBook 2.2 to work with kernel
> 2.6.5? I've attached mine, and I notice that the screen is a bit weird
> in X - there are lines running thru it
I ussually put mine at:
http://www.pirispons.net/bulma/llista/iBoo
Hi all, I have a PowerBook G3 400 Firewire running testing, and I
recently installed these packages on my system during an update:
x-window-system-core xlibmesa-gl-dev xlibmesa-glu-dev xlibmesa3
Anyway, after the install, I rebooted, then tried to play a game or
two that uses GL. I get a garbled
Hi,
Does anyone have a good .config for an iBook 2.2 to work with kernel
2.6.5? I've attached mine, and I notice that the screen is a bit weird
in X - there are lines running thru it
If it matters, I've installed module-init-tools, also have dbus-1, udev,
initscripts, and libselinux1 (I thought I
[EMAIL PROTECTED] wrote:
> I tried to pally a patch form you with patch -p0 but i've recived:
Which version of the kernel do you use and against which version is
the patch? If it is 2.6, you shouldn't use the benh-tree but rather
try 2.6.5.
> The menuconfig shows "suspend to disk option" but im n
Hello :)
I tried to pally a patch form you
with patch -p0 but i've recived:
patching file drivers/ide/ppc/pmac.c
patching file drivers/macintosh/Kconfig
patching file drivers/macintosh/mediabay.c
patching file drivers/macintosh/via-pmu.c
Hunk #2 FAILED at 138.
Hunk #3 FAILED at 406.
Hunk #4 FAI
Ihre Mail an 'LabourNet' mit dem Subject/Betreff
Re: Delivery Server
wird zurueckgehalten, bis der Listenmoderator Ihre Email genehmigt.
Der Grund, weshalb eine Genehmigung erforderlich ist:
Absender ist nicht Mitglied der Liste -- E-Mails an die Liste aber
nur für Mitglieder erlaubt!
Liebe Kollegin, Lieber Kollege,
Diese Adresse wird lediglich von uns für die Versendung unseres
Newsletters verwendet.
Bitte Korrespondenz nur an [EMAIL PROTECTED] schicken.
Die Redaktion
On Sun, Apr 04, 2004 at 04:24:57AM -0400, Ron Murray wrote:
> I suspect the basic problem is that, since the on-board display in this
> Mac has failed, I had to use the PCI display. Either the board is faulty
> in some strange way (although it seems to work perfectly under MacOS),
> or the driver i
I've finally got Linux installed on the G3 minitower, but had to cheat a
little. I eventually had to install using the serial port as the console
after booting with BootX. Any attempt to use the display as the console
would lock the machine up at varying places in the install.
I suspect the basic
A fabulous business trade event for Chinese fashion-related producers / manufacturers / suppliers and international fashion buyers gathering The best business opportunities in Asia provided!
Fashion World华商荟萃2004 Do You Yahoo!?
惠普TT游戏剧，玩游戏，中大奖！
30 matches
Mail list logo
