Hallo
Since upgrading to testing and kernel 2.6.6 (with patches from Bjoern
Schmidt for fan control and awaking after screensavers monitor blanking)
ACPI is running instead of APM on my Compaq Armada 1750. Since I
activated ACPI debugging I get a lot of messages from the
/proc/acpi/event reading b
Hi,
since I have already asked some days before whether anybody could
provide scripts for acpi support e.g. to shut down the screen when the
cover is closed and since I did not receive any response,
I will ask again:
Is there someone to share his experience using acpi with kernel 2.6.(6)
and hig
On Mit, 2004-07-14 at 12:46, "Kai Kühne" wrote:
> Hi List.
> I'am new.
>
> I have a Dell Inspiron 5150 with an ethernet card named broadcom 4400.
>
> If I install the kernel 2.6.6-1-k7 I've got everty time:
>
> hdc: lost interrupt
>
> If you need more information please tell me.
>
>
> PS: Sor
Hi Mohammed,
On Mi, 2004-07-28 at 22:20, Mohammed SLIMANI wrote:
> Debian SID version, XFree86 Version 4.3.0.1, ATI radeon IGP 340 M
> (radeon mobility M7).
>
> I had a woody version without x server, I upgraded to SID then I
> installed the Xfree86:
>
> # apt-get install x-window-system-c
On Do, 2004-07-29 at 22:48, Robert Goley wrote:
> Out of curiosity, what does your /etc/inittab look like after the
> "dpkg-reconfigure console-data" command has been run. Can you verify
> if it is making the change I suggested. I can verify that the default
> sarge install only sets up 1 tty for
Russell Shaw schrieb:
Hi,
I've got a compaq armada 1120T with P-100, 850MB HDD and 16MB ram.
The HDD has a diagnostics partition with some dos utilites. Is it
ok if i lose it?
If you want a boot password, this partition is indispensable. You might
even have to keep a minimal windows 95/98 par
I have installed woody on a Compaq Armada 1750. Very smooth, everything
supported but the sound, parallel to win98, which was present on the
machine when bought secondhand. the bios/setup/F10 partition is only
avalaible via windows. I bought a Intel Etherexpress100pro PCMCIA card
which is nicel
On Mit, 2003-07-16 at 13:14, Sebastian Henschel wrote:
> hi bernhard...
>
> * "Dr. Bernhard Kleine" <[EMAIL PROTECTED]> [2003-07-16 11:58 +0200]:
>
> > whenever I try to look for xv it is not found in debian woody. How do
> > you expect to use Xv extension
On Son, 2003-08-10 at 11:29, Halil Demirezen wrote:
> Hi I got Armada 1700 compaq laptop and a pcmcia 3c589d combo 3com etherlink
> iii
> ethernet card. However, when I configured /etc/pcmcia/network... and
> /etc/init.d/pcmcia
> restart. I says that Resources are busy. Is there probably a kernel
On Son, 2003-08-17 at 13:39, Bjoern Franke wrote:
> Hi,
>
> I tried to get sarge work on my Siemens Mobile 501, a laptop with a
> PII 266, 96MB RAM, 4 GB harddrive, ESS 1869-soundchip and Neomagic
> NM2160 graphics-chipset.
>
> After some troubles (the sb.o- module of bf24, 2.4.20-686 etc. only
On Mon, 2003-08-18 at 12:25, Bjoern Franke wrote:
> Bernhard Kleine <[EMAIL PROTECTED]> wrote:
>
>
> >i have a similar soundchip and use the sb.o module. When i ran
> >sndconfig, it asked for the IRQ and i sayed 5. Now I have an error
> >message on my displa
On Mon, 2003-08-18 at 20:34, Bjoern Franke wrote:
> Bernhard Kleine <[EMAIL PROTECTED]> wrote:
>
>
> >>
> >> What error-message? Does it run on the same IRQ as lp0?
> >>
> >sb: Interrupt test on IRQ7 failes - Probable IRQ conflict
> >
>
Hallo,
how do you keep evolution data on your laptop and your workstation
synchronized. I have no problem with mails since they reside on an IMAP
server, but I do not see a way to get tasks and appointments
synchronized other than by hand. Gnome-pilot is (according to its
description) not for use
On Die, 2003-08-19 at 09:34, Bernhard Kleine wrote:
>
> Hallo,
>
> how do you keep evolution data on your laptop and your workstation
> synchronized. I have no problem with mails since they reside on an IMAP
> server, but I do not see a way to get tasks and appointments
> sy
On Mit, 2003-07-16 at 13:14, Sebastian Henschel wrote:
> hi bernhard...
>
> * "Dr. Bernhard Kleine" <[EMAIL PROTECTED]> [2003-07-16 11:58 +0200]:
>
> > whenever I try to look for xv it is not found in debian woody. How do
> > you expect to use Xv extension
On Son, 2003-08-10 at 11:29, Halil Demirezen wrote:
> Hi I got Armada 1700 compaq laptop and a pcmcia 3c589d combo 3com etherlink iii
> ethernet card. However, when I configured /etc/pcmcia/network... and
> /etc/init.d/pcmcia
> restart. I says that Resources are busy. Is there probably a kernel dr
On Son, 2003-08-17 at 13:39, Bjoern Franke wrote:
> Hi,
>
> I tried to get sarge work on my Siemens Mobile 501, a laptop with a
> PII 266, 96MB RAM, 4 GB harddrive, ESS 1869-soundchip and Neomagic
> NM2160 graphics-chipset.
>
> After some troubles (the sb.o- module of bf24, 2.4.20-686 etc. only
On Mon, 2003-08-18 at 12:25, Bjoern Franke wrote:
> Bernhard Kleine <[EMAIL PROTECTED]> wrote:
>
>
> >i have a similar soundchip and use the sb.o module. When i ran
> >sndconfig, it asked for the IRQ and i sayed 5. Now I have an error
> >message on my displa
On Mon, 2003-08-18 at 20:34, Bjoern Franke wrote:
> Bernhard Kleine <[EMAIL PROTECTED]> wrote:
>
>
> >>
> >> What error-message? Does it run on the same IRQ as lp0?
> >>
> >sb: Interrupt test on IRQ7 failes - Probable IRQ conflict
> >
>
Hallo,
how do you keep evolution data on your laptop and your workstation
synchronized. I have no problem with mails since they reside on an IMAP
server, but I do not see a way to get tasks and appointments
synchronized other than by hand. Gnome-pilot is (according to its
description) not for use
On Die, 2003-08-19 at 09:34, Bernhard Kleine wrote:
>
> Hallo,
>
> how do you keep evolution data on your laptop and your workstation
> synchronized. I have no problem with mails since they reside on an IMAP
> server, but I do not see a way to get tasks and appointments
> sy
On Mon, 2003-12-08 at 05:52, [EMAIL PROTECTED] wrote:
> I have a Armada 1750 laptop and I can't print anything off of it.
> When I go to print it tells me that my margins are set outside of the
> printable margins. Can you tell me how to set my margins?
You are sure you are using linux, since th
Using a desktop and a labtop I would like to keep the contact and
calendar folder synchronized.
What do you use for these purposes?
Bernhard
signature.asc
Description: This is a digitally signed message part
On Mon, 2003-12-08 at 05:52, [EMAIL PROTECTED] wrote:
> I have a Armada 1750 laptop and I can't print anything off of it.
> When I go to print it tells me that my margins are set outside of the
> printable margins. Can you tell me how to set my margins?
You are sure you are using linux, since th
Using a desktop and a labtop I would like to keep the contact and
calendar folder synchronized.
What do you use for these purposes?
Bernhard
signature.asc
Description: This is a digitally signed message part
Hallo
Since upgrading to testing and kernel 2.6.6 (with patches from Bjoern
Schmidt for fan control and awaking after screensavers monitor blanking)
ACPI is running instead of APM on my Compaq Armada 1750. Since I
activated ACPI debugging I get a lot of messages from the
/proc/acpi/event reading b
Hi,
since I have already asked some days before whether anybody could
provide scripts for acpi support e.g. to shut down the screen when the
cover is closed and since I did not receive any response,
I will ask again:
Is there someone to share his experience using acpi with kernel 2.6.(6)
and hig
On Mit, 2004-07-14 at 12:46, "Kai Kühne" wrote:
> Hi List.
> I'am new.
>
> I have a Dell Inspiron 5150 with an ethernet card named broadcom 4400.
>
> If I install the kernel 2.6.6-1-k7 I've got everty time:
>
> hdc: lost interrupt
>
> If you need more information please tell me.
>
>
> PS: Sor
Hi Mohammed,
On Mi, 2004-07-28 at 22:20, Mohammed SLIMANI wrote:
> Debian SID version, XFree86 Version 4.3.0.1, ATI radeon IGP 340 M
> (radeon mobility M7).
>
> I had a woody version without x server, I upgraded to SID then I
> installed the Xfree86:
>
> # apt-get install x-window-system-c
On Do, 2004-07-29 at 22:48, Robert Goley wrote:
> Out of curiosity, what does your /etc/inittab look like after the
> "dpkg-reconfigure console-data" command has been run. Can you verify
> if it is making the change I suggested. I can verify that the default
> sarge install only sets up 1 tty for
On Don, 2003-07-10 at 15:51, Pawel Maczewski wrote:
> Hi all,
> I hava a compaq laptop with this ATI card. Installed debian (woody), xfree
> 4.2.x, recompiled 2.4.21 kernel with drm for all ati's chipsets and
> everything works ok (when I use 'ati' driver), except of the Xv extension
> (and glx
On Don, 2003-07-10 at 15:51, Pawel Maczewski wrote:
> Hi all,
> I hava a compaq laptop with this ATI card. Installed debian (woody), xfree
> 4.2.x, recompiled 2.4.21 kernel with drm for all ati's chipsets and
> everything works ok (when I use 'ati' driver), except of the Xv extension
> (and glx
32 matches
Mail list logo
