Hi
scart is one thing..s-video another as far as i know..either you have an
s-video plug on your tv or you dont..converters can be bought that convert
s-video to scart but my experience is that they dont work well.
From what you read from the manual, i dont think you have a s-video
capabili
--- [EMAIL PROTECTED] escribió: >
> 4. Modem by Askey Lucent (I could not find the serial number for it).
Drivers for Lucent winmodems can be downloaded here.
http://ltmodem.heby.de/
He provides precompiled binaries for many common distros, and also a partial
source dsitribution in case you wa
--- Russell Shaw <[EMAIL PROTECTED]> escribió: > Hi,
> I've installed and used the pcmcia-cs package on debian.
>
> When i plug a 3com 3c589c pcmcia NIC in, then the card
> is detected and started, but to get it to appear as eth0
> in "ifconfig", i need to do /etc/init.d/networking restart.
> Is
Moin ben!
ben schrieb am Tuesday, den 29. April 2003:
> cdrecord: Premature EOF on stdin.
READ this message. The process starting cdrecord does not feed it with
data.
MfG,
Eduard.
--
Fehlt der Knecht am Morgen ständig, ist die Magd nachts zu lebendig.
Roberto Sanchez wrote:
--- Russell Shaw <[EMAIL PROTECTED]> escribió: > Hi,
I've installed and used the pcmcia-cs package on debian.
When i plug a 3com 3c589c pcmcia NIC in, then the card
is detected and started, but to get it to appear as eth0
in "ifconfig", i need to do /etc/init.d/networki
"Manuel" == Manuel Saavedra <[EMAIL PROTECTED]> writes:
Manuel> The XandrOS Support Team told me that maybe I had a faulty
Manuel> fan and it burned out, taking my processor and motherboard
Manuel> with it.
Manuel> Now I'm not sure if something on the XandrOS caused
Manue
Hi!
I am using a 1.7Ghz 512MbDDR Ram laptop with a 32Mb ATI Radeon M7500 card.
Installation is debian Woody with a 2.4.20 kernal (not debian kernel)
Everything was going fine until I attempted to run Tuxracer! (everything else
is going well still...)
Tuxracer runs very slooow.
I have this f
From: "Manuel Saavedra" <[EMAIL PROTECTED]>
>
> However, last week I was working on my laptop when suddenly it just turned
off. Any attempt to power-on again was futile. I had to take it to the Sony
Repair Center. They just told me that my motherboard & processor are fried.
>
> There was no electri
>Hi,
>I've installed and used the pcmcia-cs package on debian.
>
>When i plug a 3com 3c589c pcmcia NIC in, then the card
>is detected and started, but to get it to appear as eth0
>in "ifconfig", i need to do /etc/init.d/networking restart.
>Is there a standard way of making this happen automaticall
Hola~
I had Dell service my Inspiron 8000. Of course, the upgraded the bios. Now,
when I open the laptop from a suspend, the system fan starts up and never
quits until I shutdown the machine.
The kicker is that the system fan problem only occurs with Debian, not with
Windows. I've got Debian, uns
On Thu, 01 May 2003 14:16:56 +1000
Russell Shaw <[EMAIL PROTECTED]> wrote:
> Hi,
> I've installed and used the pcmcia-cs package on debian.
>
> When i plug a 3com 3c589c pcmcia NIC in, then the card
> is detected and started, but to get it to appear as eth0
> in "ifconfig", i need to do /etc/init
Hello,
I'm stuck with this one. How can I change the screen resolution to
800X600? I tried : xf86cfg
xconfigurator
trl-alt -+
with no results. Any help would be appreciated
metod
Hi,
Havent really received any replies to this post, however i must let
everyone know what the problem was.
Basically it was a matter of massive cerebral hemorraging - my brain
actually. In /etc/pcmcia/conf I had a faulty bind for my card..it was
binding to a non existent device...I had seen
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wednesday 30 April 2003 03:55 pm, Manuel Saavedra wrote:
> Hi,
>
> For no particular reason I ended up using XandrOS, a Commercial Debian
> (Woody)-Based distribution. I successfully installed it on my Sony Vaio
> PCG-FXA678 (The Latin American vers
El jue, 01 de 05 de 2003 a las 16:35, Michael K O'Brien escribió:
> Hola~
>
> I had Dell service my Inspiron 8000. Of course, the upgraded the bios. Now,
> when I open the laptop from a suspend, the system fan starts up and never
> quits until I shutdown the machine.
>
> The kicker is that the sy
I'm pretty sure you don't have dri enabled.
There is a DRI trunk somewhere, that I installed (instead of the vannilla
Xfree) to enable DRI on my Radeon 7500.
Every solution I've seen on this mailing list were the same: To use that
Xfree DRI trunk instead of the normal one.
I don't remember how I
Oh, and I'm suposing you have kernel support for DRM, etc... Please check
that too..
On Thu, 1 May 2003 12:11:16 -0400
"Metod Kolla" <[EMAIL PROTECTED]> wrote:
> Hello,
> I'm stuck with this one. How can I change the screen resolution to
> 800X600? I tried : xf86cfg
> xconfigurator
> trl-alt -+
> with no results. Any help would be appreciated
dpkg-reconfigure xserver-xfree86
Kev
I read in some many places about some drives for dvd.
I'm using now the library |libdvdread2 using /dev/cdrom.
Do you now about some driver for my /dev/ library for my laptop.
By the way, my laptop is thinkpad-r30 with dvd Hitachi GD-S250.
thank you
gustavo
|
On Thu, May 01, 2003 at 07:35:25AM -0700, Michael K O'Brien wrote:
> Hola~
>
> I had Dell service my Inspiron 8000. Of course, the upgraded the bios. Now,
> when I open the laptop from a suspend, the system fan starts up and never
> quits until I shutdown the machine.
>
> The kicker is that the s
What kind of laptop is it?
It may be that you _can't_ change the resolution on a laptop, that's
been my prior experience.
- Original Message -
From: Metod Kolla <[EMAIL PROTECTED]>
Date: Thursday, May 1, 2003 12:11 pm
Subject: Screen resolution
> Hello,
> I'm stuck with this one. How
Hi there,
> I had Dell service my Inspiron 8000. Of course, the upgraded the bios. Now,
> when I open the laptop from a suspend, the system fan starts up and never
> quits until I shutdown the machine.
common problem after suspend-2-ram. Solution: press "Fn-Z" (English keyboard,
otherwise "Fn-Y"
From: "Jaye Inabnit ke6sls" <[EMAIL PROTECTED]>
> On Wednesday 30 April 2003 03:55 pm, Manuel Saavedra wrote:
> >
> > There was no electrical over-current (and I was connected to a surge
> > protector) and I had activated the ACPI support via the XandrOS control
> > panel.
>
> Next, and this is wh
Haidiehoo Michael,
Yes, same here on a Dell Latitude C510.
My solution: (not the nicest, but ok): "Fn"-key + "Z"-key OR "Fn"-key +
"N"-key
I got this key combination from someone else on this mailinglist.
grtz,
Asim
Michael K O'Brien wrote:
Hola~
I had Dell service my Inspiron 8000. Of
On Thu, 2003-05-01 at 11:11, Metod Kolla wrote:
> Hello,
> I'm stuck with this one. How can I change the screen resolution to
> 800X600? I tried : xf86cfg
> xconfigurator
> trl-alt -+
> with no results. Any help would be appreciated
Laptops can be difficult to change the resolution in sometimes. F
I am new to this mail list, so forgive me if I
don't provide enough details for every one. I hope this is the right list
for my msg.
I have an Armada E500 (PIII 600, 128mb ram, 12
gig). I finally got Debian 3.0 installed but unable to get sound. I
know SUSE will work, but I played aroun
Wow this is a really cool trick! I was having this problem too :)
Does anyone have A chart of what each(all) key(s) do(es)?
José María Casanova Crespo wrote:
El jue, 01 de 05 de 2003 a las 16:35, Michael K O'Brien escribió:
Hola~
I had Dell service my Inspiron 8000. Of course, the upgrade
stage 2..
I have dri working now (sort of?) and drm installed.
being a bit of a noob at x (& linux in general) I just copied my modeline
section from 1400x1050 and duplicated it for all resolutions.
now when I run Tuxracer I just get a blue screen, with sound.
no actual graphics.
the modeline
R. Potter wrote:
I am new to this mail list, so forgive me if I don't provide enough
details for every one. I hope this is the right list for my msg.
I have an Armada E500 (PIII 600, 128mb ram, 12 gig). I finally got
Debian 3.0 installed but unable to get sound. I know SUSE will work,
but
I'm trying to get a usb mouse to work in X and console and I'm getting the
following messages in my /var/log/syslog file. I'm not sure what other
information would be helpful except that I'm running kernel 2.4.20.
If anyone can help I would appreciate it greatly.
Thanks
May 1 22:21:00 deli
Hi everyone
For those with good recall you may recall my earlier postings.
I have a belkin wireless pcmcia card and a netgear me102 accesspoint (with
latest firmware for 128 wep).
I keep getting various errors and major packet loss when using my wireless
connection.
error messages
kernel:
31 matches
Mail list logo
