I have a Dell Lattitude CPx and the Xircom CBEM56G-100 card.
When I ran pcmcia-cs-3.1.22 I had to run it in promisc mode
all the time. I upgraded to pcmcia-cs-3.1.25 and now I don't
need to run it in promisc mode all the time, but I have to
remind it that it's up now and again. Fo
I have a Dell Lattitude CPx and the Xircom CBEM56G-100 card.
When I ran pcmcia-cs-3.1.22 I had to run it in promisc mode
all the time. I upgraded to pcmcia-cs-3.1.25 and now I don't
need to run it in promisc mode all the time, but I have to
remind it that it's up now and again. F
>On Tue, Jun 19, 2001 at 09:44:37AM -0400, Peter Solodov wrote:
>> On Mon, 18 Jun 2001, Robert Waldner wrote:
>>
>> > Try putting the card into promiscous mode `ifconfig eth0 promisc`.
>> > Works wonders on almost all Xircom cards here in the office.
>>
>> Indeed, it works wonders :-) So I'm ha
>On Tue, Jun 19, 2001 at 09:44:37AM -0400, Peter Solodov wrote:
>> On Mon, 18 Jun 2001, Robert Waldner wrote:
>>
>> > Try putting the card into promiscous mode `ifconfig eth0 promisc`.
>> > Works wonders on almost all Xircom cards here in the office.
>>
>> Indeed, it works wonders :-) So I'm h
Well, my Xircom RealPort (REM56G-100) continues to timeout every 1
minute or so (and it stays "offline" for about 30 seconds and them
recovers).
This happens with kernel 2.4.5, pcmcia-cs-3.1.26 and
$ /sbin/lsmod
Module Size Used by
xirc2ps_cs 14048 1
maestro
I am using a Xircom Realport2 Cardbus Adapter. Which driver do you
use? The one with the kernel or with pcmcia-cs?
Stephen
On 19 Jun 2001, Peter Solodov wrote:
> On Tue, 19 Jun 2001, Stephen Torri wrote:
> > What kind of xircom card do you have? I have not been following this
> > thread lately.
On Tue, 19 Jun 2001, Stephen Torri wrote:
> What kind of xircom card do you have? I have not been following this
> thread lately.
It's IBM EtherJet, but reported as Xircom Cardbus Adapter.
P.
What kind of xircom card do you have? I have not been following this
thread lately.
On 19 Jun 2001, Peter Solodov wrote:
> On Mon, 18 Jun 2001, Robert Waldner wrote:
>
> > Try putting the card into promiscous mode `ifconfig eth0 promisc`.
> > Works wonders on almost all Xircom cards here in the
On Mon, 18 Jun 2001, Robert Waldner wrote:
> Try putting the card into promiscous mode `ifconfig eth0 promisc`.
> Works wonders on almost all Xircom cards here in the office.
Indeed, it works wonders :-) So I'm happy to report success story with
xircom card and PCMCIA module from 2.4.5 kernel.
Well, my Xircom RealPort (REM56G-100) continues to timeout every 1
minute or so (and it stays "offline" for about 30 seconds and them
recovers).
This happens with kernel 2.4.5, pcmcia-cs-3.1.26 and
$ /sbin/lsmod
Module Size Used by
xirc2ps_cs 14048 1
maestro
I am using a Xircom Realport2 Cardbus Adapter. Which driver do you
use? The one with the kernel or with pcmcia-cs?
Stephen
On 19 Jun 2001, Peter Solodov wrote:
> On Tue, 19 Jun 2001, Stephen Torri wrote:
> > What kind of xircom card do you have? I have not been following this
> > thread lately.
On Tue, 19 Jun 2001, Stephen Torri wrote:
> What kind of xircom card do you have? I have not been following this
> thread lately.
It's IBM EtherJet, but reported as Xircom Cardbus Adapter.
P.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMA
What kind of xircom card do you have? I have not been following this
thread lately.
On 19 Jun 2001, Peter Solodov wrote:
> On Mon, 18 Jun 2001, Robert Waldner wrote:
>
> > Try putting the card into promiscous mode `ifconfig eth0 promisc`.
> > Works wonders on almost all Xircom cards here in th
On Mon, 18 Jun 2001, Robert Waldner wrote:
> Try putting the card into promiscous mode `ifconfig eth0 promisc`.
> Works wonders on almost all Xircom cards here in the office.
Indeed, it works wonders :-) So I'm happy to report success story with
xircom card and PCMCIA module from 2.4.5 kernel.
On 17 Jun 2001 21:28:04 EDT, Peter Solodov writes:
>Just bumped into the same problem too. I used 2.4.5 kernel. I was able
>to load xircom_tulip_cb module successfully, but then 100% of packets
>were lost and I was not able to access any computer on my small
>LAN. pcmcia_cs worked fine before and
On 17 Jun 2001 21:28:04 EDT, Peter Solodov writes:
>Just bumped into the same problem too. I used 2.4.5 kernel. I was able
>to load xircom_tulip_cb module successfully, but then 100% of packets
>were lost and I was not able to access any computer on my small
>LAN. pcmcia_cs worked fine before and
On Mon, 18 Jun 2001, Ivan Fernandez Pelaez wrote:
> Hi,
>
> I've got a Xircom CBEM56G modem/ethernet card, which used to work
> fine under 2.2.x kernels and the standard pcmcia-cs package. For
> other reasons, I've had to upgrade to 2.4 and was trying to get it
> to work with the pcmcia drivers in
Hi,
I've got a Xircom CBEM56G modem/ethernet card, which used to work fine
under 2.2.x kernels and the standard pcmcia-cs package. For other
reasons, I've had to upgrade to 2.4 and was trying to get it to work
with the pcmcia drivers included in the kernel. In my laptop, the new
kernel pcmcia only
On Mon, 18 Jun 2001, Ivan Fernandez Pelaez wrote:
> Hi,
>
> I've got a Xircom CBEM56G modem/ethernet card, which used to work
> fine under 2.2.x kernels and the standard pcmcia-cs package. For
> other reasons, I've had to upgrade to 2.4 and was trying to get it
> to work with the pcmcia drivers i
Hi,
I've got a Xircom CBEM56G modem/ethernet card, which used to work fine
under 2.2.x kernels and the standard pcmcia-cs package. For other
reasons, I've had to upgrade to 2.4 and was trying to get it to work
with the pcmcia drivers included in the kernel. In my laptop, the new
kernel pcmcia onl
20 matches
Mail list logo
