Re: new debian user trouble with dwl-650 wireless network card

On Mon, Jul 04, 2005 at 09:14:57AM -0500, Dan Elliott wrote: > Andrew McMillan wrote: >> On Sun, 2005-06-26 at 21:22 -0500, Dan Elliott wrote: >>> Assuming I have surmised the correct Rev, dlink says my card uses the >>> Prism chip set. According to Andrew's post the card should work with >>> th

Re: new debian user trouble with dwl-650 wireless network card

Andrew McMillan wrote: On Sun, 2005-06-26 at 21:22 -0500, Dan Elliott wrote: According to the pictures found at http://support.dlink.com/products/revision.asp my wireless card should be one of DWL-650 Rev A1-J3. Assuming I have surmised the correct Rev, dlink says my card uses the Prism

Re: new debian user trouble with dwl-650 wireless network card

On Sun, 2005-06-26 at 21:22 -0500, Dan Elliott wrote: > > According to the pictures found at > http://support.dlink.com/products/revision.asp my wireless card should > be one of DWL-650 Rev A1-J3. > > Assuming I have surmised the correct Rev, dlink says my card uses the

Re: new debian user trouble with dwl-650 wireless network card

-650 wireless ethernet card. I have found information via Google which seems to indicate Woody should support this device. Given that I am new, I am looking for advice on where to begin to find a solution to my problem. It may, and it may not. If it's an earlier DWL 650 then it is a

Re: new debian user trouble with dwl-650 wireless network card

This was sent directly to me. I thought the information was very helpful. Original Message Subject:Re: new debian user trouble with dwl-650 wireless network card Date: Fri, 24 Jun 2005 14:18:04 -0700 From: Rod Waldren <[EMAIL PROTECTED]> To: Dan Elliott &

Re: new debian user trouble with dwl-650 wireless network card

Take a look here: http://acx100.sourceforge.net/ I think it can help you. Andrew McMillan writes: On Fri, 2005-06-24 at 15:44 -0500, Dan Elliott wrote: Hello, I am relatively new to Debian. I have Debian Woody installed on an IBM Thinkpad. I have a D-Link DWL-650 wireless ethernet card

Re: new debian user trouble with dwl-650 wireless network card

On Fri, 2005-06-24 at 15:44 -0500, Dan Elliott wrote: > Hello, > > I am relatively new to Debian. I have Debian Woody installed on an IBM > Thinkpad. I have a D-Link DWL-650 wireless ethernet card. I have found > information via Google which seems to indicate Woody shou

new debian user trouble with dwl-650 wireless network card

Hello, I am relatively new to Debian. I have Debian Woody installed on an IBM Thinkpad. I have a D-Link DWL-650 wireless ethernet card. I have found information via Google which seems to indicate Woody should support this device. Given that I am new, I am looking for advice on where to

Re: D-Link DWL-650+

On Thu, 2005-02-03 at 15:27 +0100, Krzysztof Wilk wrote: > Hi Christian, > > > Instead I have to run a script after the laptop is booted. Now my > > question is if I could make this process automated in any way. And if > > anyone has done it? > > > > > > With the G650 I had some lines in /etc/

Re: D-Link DWL-650+

Hi Christian, Instead I have to run a script after the laptop is booted. Now my question is if I could make this process automated in any way. And if anyone has done it? With the G650 I had some lines in /etc/network/interfaces and that worked excellent with that card. The lines were: auto ath

D-Link DWL-650+

Hi. I've been using a D-Link DWL-G650 pcmcia card with the madwifi-driver for quite a while now, but I've changed card to a D-Link DWL-650+ using the acx100-driver. It's working fine and all but it doesn't start automatically at boot time. Instead I have to run a script after

Re: D-Link (pcmcia) DWL-650, debian 3.0r2 and Intel ISA to pcmcia card

Incoming from Matt Foster: > Quoting A. F. Cano ([EMAIL PROTECTED]): > > > > slots, but also that it requires cardbus. Is it necessary that the hardware > > explicitely support cardbus? This is an old board so it likely does not. > > I'm pretty sure that you do need cardbus support, and it will

Re: D-Link (pcmcia) DWL-650, debian 3.0r2 and Intel ISA to pcmcia card

Incoming from Matt Foster: > Quoting A. F. Cano ([EMAIL PROTECTED]): > > > > slots, but also that it requires cardbus. Is it necessary that the hardware > > explicitely support cardbus? This is an old board so it likely does not. > > I'm pretty sure that you do need cardbus support, and it will

Re: D-Link (pcmcia) DWL-650, debian 3.0r2 and Intel ISA to pcmcia card

Quoting A. F. Cano ([EMAIL PROTECTED]): > Hi, > > After having read quite a bit about what is supported, I went out and got > the D-Link DWL-650. This wireless card is listed as working and tested > at www.linux-wlan.org, the revision is P1 which according to D-Link is &g

Re: D-Link (pcmcia) DWL-650, debian 3.0r2 and Intel ISA to pcmcia card

Quoting A. F. Cano ([EMAIL PROTECTED]): > Hi, > > After having read quite a bit about what is supported, I went out and got > the D-Link DWL-650. This wireless card is listed as working and tested > at www.linux-wlan.org, the revision is P1 which according to D-Link is &g

D-Link (pcmcia) DWL-650, debian 3.0r2 and Intel ISA to pcmcia card

Hi, After having read quite a bit about what is supported, I went out and got the D-Link DWL-650. This wireless card is listed as working and tested at www.linux-wlan.org, the revision is P1 which according to D-Link is a Prism chipset. According to what I've read, the orinoco_cs driver s

D-Link (pcmcia) DWL-650, debian 3.0r2 and Intel ISA to pcmcia card

Hi, After having read quite a bit about what is supported, I went out and got the D-Link DWL-650. This wireless card is listed as working and tested at www.linux-wlan.org, the revision is P1 which according to D-Link is a Prism chipset. According to what I've read, the orinoco_cs driver s

Dlink DWL-650+ card works fine on Linux

Just want to let anyone who's considering the DWL-650+ (802.11b+ , 22Mbs , chipset by Texas Instrument) . I got this card working fine under linux. Check this page for details -> http://acx100.sourceforge.net/

Re: D-Link DWL-650 11Mbps WLAN Card, Version 01.02...

On Sat, Sep 06, 2003 at 07:10:54PM +0200, Cristian Ionescu-Idbohrn wrote: > kernel 2.4.19 and oricoco_cs driver. > > Anyone able to confirm this _should_ be possible? I use the wlan-ng drivers with my 650. That way I can use kismet and airsnort. - Ryan pgpKOLOOAkGdX.pgp Description: PGP s

Dlink DWL-650+ card works fine on Linux

Just want to let anyone who's considering the DWL-650+ (802.11b+ , 22Mbs , chipset by Texas Instrument) . I got this card working fine under linux. Check this page for details -> http://acx100.sourceforge.net/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a su

Re: D-Link DWL-650 11Mbps WLAN Card, Version 01.02...

Cristian Ionescu-Idbohrn <[EMAIL PROTECTED]> writes: > On Sat, 6 Sep 2003, Jaakko Niemi wrote: > >> Cristian Ionescu-Idbohrn <[EMAIL PROTECTED]> writes: >> >> > ...kernel 2.4.19 and oricoco_cs driver. >> > >> > Anyone able to confirm this _should_ be possible? >> >> I'm using same card. Works jus

Re: D-Link DWL-650 11Mbps WLAN Card, Version 01.02...

On Sat, 6 Sep 2003, Jaakko Niemi wrote: > Cristian Ionescu-Idbohrn <[EMAIL PROTECTED]> writes: > > > ...kernel 2.4.19 and oricoco_cs driver. > > > > Anyone able to confirm this _should_ be possible? > > I'm using same card. Works just fine with later kernels. Can you be more specific? I'm scepti

Re: D-Link DWL-650 11Mbps WLAN Card, Version 01.02...

On Sat, Sep 06, 2003 at 07:10:54PM +0200, Cristian Ionescu-Idbohrn wrote: > kernel 2.4.19 and oricoco_cs driver. > > Anyone able to confirm this _should_ be possible? I use the wlan-ng drivers with my 650. That way I can use kismet and airsnort. - Ryan pgp0.pgp Description: PGP signat

Re: D-Link DWL-650 11Mbps WLAN Card, Version 01.02...

Cristian Ionescu-Idbohrn <[EMAIL PROTECTED]> writes: > On Sat, 6 Sep 2003, Jaakko Niemi wrote: > >> Cristian Ionescu-Idbohrn <[EMAIL PROTECTED]> writes: >> >> > ...kernel 2.4.19 and oricoco_cs driver. >> > >> > Anyone able to confirm this _should_ be possible? >> >> I'm using same card. Works jus

Re: D-Link DWL-650 11Mbps WLAN Card, Version 01.02...

On Sat, 6 Sep 2003, Jaakko Niemi wrote: > Cristian Ionescu-Idbohrn <[EMAIL PROTECTED]> writes: > > > ...kernel 2.4.19 and oricoco_cs driver. > > > > Anyone able to confirm this _should_ be possible? > > I'm using same card. Works just fine with later kernels. Can you be more specific? I'm scepti

Re: D-Link DWL-650 11Mbps WLAN Card, Version 01.02...

Cristian Ionescu-Idbohrn <[EMAIL PROTECTED]> writes: > ...kernel 2.4.19 and oricoco_cs driver. > > Anyone able to confirm this _should_ be possible? I'm using same card. Works just fine with later kernels. You propably want to upgrade the firmware on the card also. --j

D-Link DWL-650 11Mbps WLAN Card, Version 01.02...

...kernel 2.4.19 and oricoco_cs driver. Anyone able to confirm this _should_ be possible? Cheers, Cristian

Re: D-Link DWL-650 11Mbps WLAN Card, Version 01.02...

Cristian Ionescu-Idbohrn <[EMAIL PROTECTED]> writes: > ...kernel 2.4.19 and oricoco_cs driver. > > Anyone able to confirm this _should_ be possible? I'm using same card. Works just fine with later kernels. You propably want to upgrade the firmware on the card also. --j -- T

D-Link DWL-650 11Mbps WLAN Card, Version 01.02...

...kernel 2.4.19 and oricoco_cs driver. Anyone able to confirm this _should_ be possible? Cheers, Cristian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Wireless D-Link DWL- 650+

* Francois Chenais <[EMAIL PROTECTED]>, 2003-05-16 09:31 -0400: > In fact, it seems that the only really well supported cards are the ones > using prism chipset ? Somebody knows if the NetGear WG511 card use this > chip ? The free support doesn't reply to phone and the web site doesn't > say anyth

Re: Wireless D-Link DWL- 650+

| > His somebody has yet installed the DWL 650+ wireless card on Debian ? | > With 2.4.20 kernel. | | as others have stated, the chip (ti acx100) is currently unsupported under | linux. but check out the sourceforge project: | http://sourceforge.net/projects/acx100/ |

Re: Wireless D-Link DWL- 650+

hello françois.. Received at 2003-05-14 / 21:37 by Francois Chenais: > > His somebody has yet installed the DWL 650+ wireless card on Debian ? > With 2.4.20 kernel. as others have stated, the chip (ti acx100) is currently unsupported under linux. but check out the sourceforge proj

Re: Wireless D-Link DWL- 650+

* Francois Chenais <[EMAIL PROTECTED]> [2003-05-14 16:29] : > Hello, > > His somebody has yet installed the DWL 650+ wireless card on Debian ? > With 2.4.20 kernel. Hello François, AFAIK this specific card is NOT supported under Linux whereas the DWL 650 is. See http://sup

Re: Wireless D-Link DWL- 650+

Francois Chenais <[EMAIL PROTECTED]> wrote: > Hello, > > His somebody has yet installed the DWL 650+ wireless card on Debian ? > With 2.4.20 kernel. > The DWL 650+, wasn't that the totally incompatible with linux wireless card? I have heard things about it, Texas I

Wireless D-Link DWL- 650+

Hello, His somebody has yet installed the DWL 650+ wireless card on Debian ? With 2.4.20 kernel. Thanks a lot François -- Debian SID Linux tanna 2.4.20-freeswan-ipvs-xfs #7 SMP Tue Feb 11 11:01:05 CET 2003 i686 unknown unknown GNU/Linux Linux Counter #59413 PGP fingerprint

Re: DWL-650 (D-Link)

On Mon, Mar 24, 2003 at 12:43:17PM -0900, Jon wrote: > This card (the D-Link) will now give me a high beep then a low beep. > And here is the snip from the log: > Mar 23 22:49:51 desiree kernel: eth0: Looks like an Intersil firmware version > 1.3.4 Hmm, from memory, thats a buggy firmware. I fou

DWL-650 (D-Link)

Hello, I have a small laptop, P75 machine, with a PCMCIA card, and a D-Link DWL-650 wireless card. Having alot of trouble getting this thing to work, but I'm getting closer. I'm using kernel 2.4.18 (because anything higher doesn't work on this machine, its a bug), PCMCIA-cs 3.2

Re: DWL-650 (D-Link)

On Mon, Mar 24, 2003 at 12:43:17PM -0900, Jon wrote: > This card (the D-Link) will now give me a high beep then a low beep. > And here is the snip from the log: > Mar 23 22:49:51 desiree kernel: eth0: Looks like an Intersil firmware version 1.3.4 Hmm, from memory, thats a buggy firmware. I found

DWL-650 (D-Link)

Hello, I have a small laptop, P75 machine, with a PCMCIA card, and a D-Link DWL-650 wireless card. Having alot of trouble getting this thing to work, but I'm getting closer. I'm using kernel 2.4.18 (because anything higher doesn't work on this machine, its a bug), PCMCIA-cs 3.2

Re: DWL-650 Dlink Wireless Card

omment about it. Thanks. > > P.D.: Thanks to Fernando Gonz?lez and Ed Wiget but sorry, I put the subject > wrong. I would refer to DWL-650 pcmcia wireless card. > > > Regards... > > > _ > http://www.latinmail.

Re: DWL-650 Dlink Wireless Card

omment about it. Thanks. > > P.D.: Thanks to Fernando Gonz?lez and Ed Wiget but sorry, I put the subject wrong. I > would refer to DWL-650 pcmcia wireless card. > > > Regards... > > > _ > http://www.latinmail.

Re: DWL-650+ (plus) Dlink Wireless Card

Andrew McMillan writes: Hello, Not yet supported by Linux. I believe this is based around a TI (AX100?) chipset. It is possible that work is progressing on a closed-source driver - see D-Link's website for details. thanks to all for your comments and I'm sorry for subject problems, the

Re: DWL-650+ (plus) Dlink Wireless Card

Andrew McMillan writes: Hello, Not yet supported by Linux. I believe this is based around a TI (AX100?) chipset. It is possible that work is progressing on a closed-source driver - see D-Link's website for details. thanks to all for your comments and I'm sorry for subject problems, the fuck

Re: DWL-650 Dlink Wireless Card

ws many symbole errors. > I listen any comment about it. Thanks. Older DWL-650 is the Prism chipset, but I believe recent ones are not supported under Linux. Perhaps that only applies to the "22MB" DWL-650+ (which definitely isn't supported yet). For the Prism based ones you can u

Re: DWL-650+ (plus) Dlink Wireless Card

On Sat, 2003-03-01 at 10:03, [EMAIL PROTECTED] wrote: > Hello, > sorry, I refer to the subject's card. Not yet supported by Linux. I believe this is based around a TI (AX100?) chipset. It is possible that work is progressing on a closed-source driver - see D-Link's website for details. Cheers,

Re: DWL-650 Dlink Wireless Card

ws many symbole errors. > I listen any comment about it. Thanks. Older DWL-650 is the Prism chipset, but I believe recent ones are not supported under Linux. Perhaps that only applies to the "22MB" DWL-650+ (which definitely isn't supported yet). For the Prism based ones you can u

Re: DWL-650+ (plus) Dlink Wireless Card

On Sat, 2003-03-01 at 10:03, [EMAIL PROTECTED] wrote: > Hello, > sorry, I refer to the subject's card. Not yet supported by Linux. I believe this is based around a TI (AX100?) chipset. It is possible that work is progressing on a closed-source driver - see D-Link's website for details. Cheers,

DWL-650+ (plus) Dlink Wireless Card

Hello, sorry, I refer to the subject's card. Regards...

Re: DWL-650 Dlink Wireless Card

listen any comment about it. Thanks. P.D.: Thanks to Fernando González and Ed Wiget but sorry, I put the subject wrong. I would refer to DWL-650 pcmcia wireless card. Regards... _ http://www.latinmail.com. Gratuito, latino y en español.

DWL-650 Dlink Wireless Card

to Fernando González and Ed Wiget but sorry, I put the subject wrong. I would refer to DWL-650 pcmcia wireless card. Regards... _ http://www.latinmail.com. Gratuito, latino y en español.

DWL-650+ (plus) Dlink Wireless Card

Hello, sorry, I refer to the subject's card. Regards... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: DWL-650 Dlink Wireless Card

ny comment about it. Thanks. P.D.: Thanks to Fernando González and Ed Wiget but sorry, I put the subject wrong. I would refer to DWL-650 pcmcia wireless card. Regards... _ http://www.latinmail.com. Gratuito, latino y en español. -- To U

DWL-650 Dlink Wireless Card

to Fernando González and Ed Wiget but sorry, I put the subject wrong. I would refer to DWL-650 pcmcia wireless card. Regards... _ http://www.latinmail.com. Gratuito, latino y en español. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED

Re: D-Link DWL 650

Try playing around with your wireless.opts file. Also in you /etc/network/interfaces file you should have a line for wlan0. Check out: http://perso.club-internet.fr/olberger/tips/#id2831594 I used this guy's setup as an example when I configured my DWL-650. - Ryan On Fri, Jan 31, 2003 at

Re: D-Link DWL 650

Try playing around with your wireless.opts file. Also in you /etc/network/interfaces file you should have a line for wlan0. Check out: http://perso.club-internet.fr/olberger/tips/#id2831594 I used this guy's setup as an example when I configured my DWL-650. - Ryan On Fri, Jan 31, 2003 at

Re: D-Link DWL 650

On Friday 31 January 2003 15:39, Andrew Perrin wrote: > Try using wlan0 just as you would eth0: > > iwconfig wlan0 essid '' > ifconfig wlan0 up > > Then, however you would configure an IP address: either manually, e.g.,: > > ifconfig wlan0 address a.b.c.d > > or: > > dhclient wlan0 > > Cheers, > An

Re: D-Link DWL 650

On Friday 31 January 2003 15:39, Andrew Perrin wrote: > Try using wlan0 just as you would eth0: > > iwconfig wlan0 essid '' > ifconfig wlan0 up > > Then, however you would configure an IP address: either manually, e.g.,: > > ifconfig wlan0 address a.b.c.d > > or: > > dhclient wlan0 > > Cheers, > An

Re: D-Link DWL 650

eers, Andy -- Andrew J Perrin - http://www.unc.edu/~aperrin Assistant Professor of Sociology, U of North Carolina, Chapel Hill [EMAIL PROTECTED] * andrew_perrin (at) unc.edu On Fri, 31 Jan 2003, Maximilian Pascher wrote: > Hi, > I've got a D-Link DWL 650 wlan card and a problem with it...

Re: D-Link DWL 650

eers, Andy -- Andrew J Perrin - http://www.unc.edu/~aperrin Assistant Professor of Sociology, U of North Carolina, Chapel Hill [EMAIL PROTECTED] * andrew_perrin (at) unc.edu On Fri, 31 Jan 2003, Maximilian Pascher wrote: > Hi, > I've got a D-Link DWL 650 wlan card and a problem with it

D-Link DWL 650

Hi, I've got a D-Link DWL 650 wlan card and a problem with it... When I insert the card I dmsg shows the following messages: init_module: prism2_cs.o: 0.1.15 Loaded init_module: dev_info is: prism2_cs prism2_cs: index 0x01: Vcc 3.3, irq 11, io 0x0100-0x013f ident: nic h/w: id=0x800c 1.0.0

D-Link DWL 650

Hi, I've got a D-Link DWL 650 wlan card and a problem with it... When I insert the card I dmsg shows the following messages: init_module: prism2_cs.o: 0.1.15 Loaded init_module: dev_info is: prism2_cs prism2_cs: index 0x01: Vcc 3.3, irq 11, io 0x0100-0x013f ident: nic h/w: id=0x800c 1.0.0

Orinoco driver for DWL-650 wireless card

Someone sent the instructions for switching drivers for this card, but I've lost them. Can you resend the instructions? -- Darryl L. Pierce <[EMAIL PROTECTED]> Visit the Infobahn Offramp @ "What do you care what other people think, Mr. Feynman?" pgp4xM3994jRH.pgp De

Orinoco driver for DWL-650 wireless card

Someone sent the instructions for switching drivers for this card, but I've lost them. Can you resend the instructions? -- Darryl L. Pierce <[EMAIL PROTECTED]> Visit the Infobahn Offramp @ "What do you care what other people think, Mr. Feynman?" msg06840/pgp0.

Re: DWL-650

On Tue, 2002-02-05 at 10:35, Dave Thayer wrote: > > > > Does anyone have any help they can throw my way on how to get this > > working? I think the biggest hang-up I've got is that I have no clue > > how to identify this device in the /etc/pcmcia/config file. I know > > it's not listed there,

Re: DWL-650

On Tue, 2002-02-05 at 10:35, Dave Thayer wrote: > > > > Does anyone have any help they can throw my way on how to get this > > working? I think the biggest hang-up I've got is that I have no clue > > how to identify this device in the /etc/pcmcia/config file. I know > > it's not listed there

Re: DWL-650

On Mon, Feb 04, 2002 at 04:52:43PM -0500, [EMAIL PROTECTED] wrote: > I have the same card but haven't followed this thread. What's the > benefit of switching drivers to orinoco? The wvlan_cs is no longer being maintained, orinoco_cs is under active development. For a well written FAQ go to: http:

Re: DWL-650

On Mon, Feb 04, 2002 at 02:35:32PM -0700, Dave Thayer wrote: I have the same card but haven't followed this thread. What's the benefit of switching drivers to orinoco? -- Darryl L. Pierce <[EMAIL PROTECTED]> Visit the Infobahn Offramp @ "What do you care what other

Re: DWL-650

h trying to get this driver working > again. > > There used to be a website that had specifics, in great detail, on how > to get this D-Link DWL-650 NIC working with the orinoco_cs driver. > But I've spent two days looking for it and have come up with nothing. >

Re: DWL-650

On Mon, Feb 04, 2002 at 04:52:43PM -0500, [EMAIL PROTECTED] wrote: > I have the same card but haven't followed this thread. What's the > benefit of switching drivers to orinoco? The wvlan_cs is no longer being maintained, orinoco_cs is under active development. For a well written FAQ go to: http

Re: DWL-650

On Mon, Feb 04, 2002 at 02:35:32PM -0700, Dave Thayer wrote: I have the same card but haven't followed this thread. What's the benefit of switching drivers to orinoco? -- Darryl L. Pierce <[EMAIL PROTECTED]> Visit the Infobahn Offramp @ "What do you care what othe

Re: DWL-650

with trying to get this driver working > again. > > There used to be a website that had specifics, in great detail, on how > to get this D-Link DWL-650 NIC working with the orinoco_cs driver. > But I've spent two days looking for it and have come up with nothing. >

Re: DWL-650

in. > > > > There used to be a website that had specifics, in great detail, on how > > to get this D-Link DWL-650 NIC working with the orinoco_cs driver. > > But I've spent two days looking for it and have come up with nothing. > > It was originally a post on a

Re: DWL-650

get this driver working > again. > > There used to be a website that had specifics, in great detail, on how > to get this D-Link DWL-650 NIC working with the orinoco_cs driver. > But I've spent two days looking for it and have come up with nothing. > It was originally

DWL-650

specifics, in great detail, on how to get this D-Link DWL-650 NIC working with the orinoco_cs driver. But I've spent two days looking for it and have come up with nothing. It was originally a post on a web-zine. Does anyone have any help they can throw my way on how to get this working? I

Re: DWL-650

in. > > > > There used to be a website that had specifics, in great detail, on how > > to get this D-Link DWL-650 NIC working with the orinoco_cs driver. > > But I've spent two days looking for it and have come up with nothing. > > It was originally a post on a

Re: DWL-650

get this driver working > again. > > There used to be a website that had specifics, in great detail, on how > to get this D-Link DWL-650 NIC working with the orinoco_cs driver. > But I've spent two days looking for it and have come up with nothing. > It was originally

DWL-650

specifics, in great detail, on how to get this D-Link DWL-650 NIC working with the orinoco_cs driver. But I've spent two days looking for it and have come up with nothing. It was originally a post on a web-zine. Does anyone have any help they can throw my way on how to get this working? I

Re: orinoco & DWL-650

Apparently, on Mon, Dec 31, 2001 at 06:57:41AM -0500, Tom Allison wrote: > after moving orinoco.o and orinoco_cs.o to > /lib/modules/2.4.17-10/kernel/drivers/pcmcia/ > and linking them (ln -s ...) to /lib/modules/2.4.17/pcmcia/ > depmod -a give me: I think you also need hermes.o. The kernel pcmci

Re: orinoco & DWL-650

Apparently, on Mon, Dec 31, 2001 at 06:57:41AM -0500, Tom Allison wrote: > after moving orinoco.o and orinoco_cs.o to > /lib/modules/2.4.17-10/kernel/drivers/pcmcia/ > and linking them (ln -s ...) to /lib/modules/2.4.17/pcmcia/ > depmod -a give me: I think you also need hermes.o. The kernel pcmc

Re: orinoco & DWL-650

On Mon, Dec 31, 2001 at 06:57:41AM -0500, Tom Allison wrote: > Does anyone have any experience with the wireless pcmcia card driver > orinoco.o & orinoco_cs.o? Yes, I'm using it right now. > I've been running Debian-testing with my custom kernel 2.4.17 and > pcmcia-cs-3.1.29 and the wireless ca

Re: orinoco & DWL-650

On Mon, Dec 31, 2001 at 06:57:41AM -0500, Tom Allison wrote: > Does anyone have any experience with the wireless pcmcia card driver > orinoco.o & orinoco_cs.o? Yes, I'm using it right now. > I've been running Debian-testing with my custom kernel 2.4.17 and > pcmcia-cs-3.1.29 and the wireless c

orinoco & DWL-650

Does anyone have any experience with the wireless pcmcia card driver orinoco.o & orinoco_cs.o? I've been running Debian-testing with my custom kernel 2.4.17 and pcmcia-cs-3.1.29 and the wireless card driver wvlan_cs.o wvlan_cs.o was the driver of choice some years ago, but I understand that

orinoco & DWL-650

Does anyone have any experience with the wireless pcmcia card driver orinoco.o & orinoco_cs.o? I've been running Debian-testing with my custom kernel 2.4.17 and pcmcia-cs-3.1.29 and the wireless card driver wvlan_cs.o wvlan_cs.o was the driver of choice some years ago, but I understand that t

Re: dwl-650 encryption

Tom Allison wrote: I got this wireless card working with no problems initially. But I'm trying to set up the encryption. I know it says to punch up some 112(?) bit encryption key and enter it somewhere... I might be able to figure out where, but how does one generate a realistic encryption key?

Re: dwl-650 encryption

Tom Allison wrote: > I got this wireless card working with no problems initially. > But I'm trying to set up the encryption. > I know it says to punch up some 112(?) bit encryption key and enter it > somewhere... > I might be able to figure out where, but how does one generate a > realistic encr

dwl-650 encryption

I got this wireless card working with no problems initially. But I'm trying to set up the encryption. I know it says to punch up some 112(?) bit encryption key and enter it somewhere... I might be able to figure out where, but how does one generate a realistic encryption key? Is it just a pile

dwl-650 encryption

I got this wireless card working with no problems initially. But I'm trying to set up the encryption. I know it says to punch up some 112(?) bit encryption key and enter it somewhere... I might be able to figure out where, but how does one generate a realistic encryption key? Is it just a pile