Hello
I have problem with impressive and gnome-shell on my Laptop.
After I run impressive gnome-shell seems to crash and I get graphic
errors (eg. blue screen, window movement is not updated). It seems
that just gnome-shell is affected by this, it all works fine in xfce.
best,
Max
kain88@Thinki
Am Sonntag, 22. Januar 2006 11:05 schrieb Max Moritz Sievers:
> Loading linux ...
> Loading initrd.gz ...
> Boot failed: please change disks and press a key to continue.
>
> Any disk changing didn't work.
All IRQ were set to 11. I changed it in the BIOS to automatic. Now
Am Samstag, 21. Januar 2006 10:26 schrieb Max Moritz Sievers:
> If I just follow the »the easy way« (in the cited documentation) I get the
> message:
> Boot failed
>
> So I think the problem is that the installer files do work for me:
> http://www.debian.org/releases/sarg
Am Freitag, 20. Januar 2006 17:13 schrieb Max Moritz Sievers:
> Hi,
>
> I'm trying to boot a Thinkpad X32 from an USB stick. I tried many
> combinations described on
> http://ftp.debian.org/debian/dists/sarge/main/installer-i386/current/doc/ma
>nual/en/ch04s04.html
>
&g
that means?
--
regards
Max Moritz Sievers
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
I tried this, but the problem wasn't solve.
Any other tip?
Max
2005/12/24, Michael Biebl <[EMAIL PROTECTED]>:
> Max Velasques wrote:
> > Hi,
> > I have a Acer Aspire 1414WLCi with Debian Unstable, and I'm using
> > the program kpowersave to
in the console:
$ echo -n "mem" > /sys/power/state
the laptop enter in suspend-to-ram mode.
So, I think this should be a problem with some configuration with powersave.
Anybody can help me?
Thanks!!
Max
e of the /etc/hibernate/hibernate.conf:
### sysfs_power_state
## To use /sys/power/state to suspend your machine (which may offer
## suspend-to-RAM, suspend-to-disk, standby, etc) comment out all the options
## above for Software Suspend 2, below for acpi_sleep, and uncomment this line.
## You may replace mem with any one of the states from "cat /sys/power/state"
UseSysfsPowerState mem
PowerdownMethod shutdown
A think that after a resume the system loses the X configurations of the touchpad, but I don't know why.
Somebody has some solution?
Thanks!!
Max Velasques
problem still persists.
After some time using the laptop, the battery status disappear.
If I give the command: $ cat /proc/acpi/battery/BAT0/status
I receive:
present: yes
ERROR: Unable to read battery status
The dmesg command shows:
ACPI-0105: *** Error: Could not allocate new owner_id (32 max
__
Renovamos el Correo Yahoo!
Nuevos servicios, más seguridad
http://correo.yahoo.es
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
I have the same problems on a Fedora Core 3 with the 6629 drivers. I
tried some tricks but they didn't work. You may read these posts on the
NVidia forum to see what I tried:
http://www.nvnews.net/vbulletin/showthread.php?t=43577
http://www.nvnews.net/vbulletin/showthread.php?t=43799
I tried
and i could get it work with the dri-trunk at
http://dri.sourceforge.net/ using this tutorial (in german)
http://www.student.informatik.tu-darmstadt.de/~zeimetz/R40-Debian/node47.html
(can use google to translate if needed)
Max
could get it work with the dri-trunk at
http://dri.sourceforge.net/ using this tutorial (in german)
http://www.student.informatik.tu-darmstadt.de/~zeimetz/R40-Debian/node47.html
(can use google to translate if needed)
Max
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Driver audio for laptop sony ati mobility radeon m6
ly-8mb ??
Tanks
Driver audio for laptop sony ati mobility radeon m6
ly-8mb ??
Tanks
(i've already posted this on usenet (linux.debian.laptop), however I
don't remember if the list is synced with the newsgroup. so here it
comes again)
Pleace CC me, im not on the list!
Hi all!
I recently bought a wlan 802.11b pcmcia card, namely the d-link 610
(http://www.dlink.co.uk/1936.htm) Ho
(i've already posted this on usenet (linux.debian.laptop), however I
don't remember if the list is synced with the newsgroup. so here it
comes again)
Pleace CC me, im not on the list!
Hi all!
I recently bought a wlan 802.11b pcmcia card, namely the d-link 610
(http://www.dlink.co.uk/1936.htm) Ho
I'm 'repairing" (huh!) my IBM thinkpad (P1). I
mistakenly delete reference to the A drive in the bios and now, having exhausted
my ingenuity, I can't get back into the BIOS to remedy the error.
Any ideas how??
Max Shaw
[EMAIL PROTECTED]
I'm 'repairing" (huh!) my IBM thinkpad (P1). I
mistakenly delete reference to the A drive in the bios and now, having exhausted
my ingenuity, I can't get back into the BIOS to remedy the error.
Any ideas how??
Max Shaw
[EMAIL PROTECTED]
e reason I ask this is that esd seems to conflict with several
apllications (quake 2 & 3 is what i can think of, sometimes wine also
doesn't like it), i usually have to kill it to make things work
thankx for replying
Max
--
/"\
\ / ASCII RIBBON CAMPAIGN
X
deamon will gnome2 use?
The reason I ask this is that esd seems to conflict with several
apllications (quake 2 & 3 is what i can think of, sometimes wine also
doesn't like it), i usually have to kill it to make things work
thankx for replying
Max
--
/"\
\ / ASCII
Sorry for the badky written post. I should make myself a little more clear.
What I wanted to say was that libesd0 works and libesd-alsa0 doesn't.
What's strange is that i've got libarts-alsa and arts startrs up just
fine...
Max
--
/"\
\ / ASCII RIBBON
Hubert Chan wrote:
[...]
Max> Everything compiled beautifully, I installed both of the packages.
Max> Because alsaconf was run before installation, alsa-modules detected
Max> a /etc/alsa/modutils/0.5 file at instalation, and seems to have
Max> copied it to /etc/asla/modutils/0.
Sorry for the badky written post. I should make myself a little more clear.
What I wanted to say was that libesd0 works and libesd-alsa0 doesn't.
What's strange is that i've got libarts-alsa and arts startrs up just
fine...
Max
--
/"\
\ / ASCII RIBBON
Hubert Chan wrote:
> [...]
>
> Max> Everything compiled beautifully, I installed both of the packages.
> Max> Because alsaconf was run before installation, alsa-modules detected
> Max> a /etc/alsa/modutils/0.5 file at instalation, and seems to have
> Max> copie
s/alsa?
Sorry for the rather lenghty mail, but I thought it would be easier to
help with all the facts at hand...
All comments appreciated!
Max
--
/"\
\ / ASCII RIBBON CAMPAIGN
X AGAINST HTML MAIL AND NEWS
/ \
#
ls/alsa?
Sorry for the rather lenghty mail, but I thought it would be easier to
help with all the facts at hand...
All comments appreciated!
Max
--
/"\
\ / ASCII RIBBON CAMPAIGN
X AGAINST HTML MAIL AND NEWS
/ \
#
got with windows.
> Thanks for your help,
> Birka
It would also help if you could tell the list which release of debian you
tried to install. The videocard drivers for X may very well be too old
for you if youre using potato with xfree 3.1.x...
Hope you won't give up that easy...
M
got with windows.
> Thanks for your help,
> Birka
It would also help if you could tell the list which release of debian you
tried to install. The videocard drivers for X may very well be too old
for you if youre using potato with xfree 3.1.x...
Hope you won't give up that easy...
M
On Sat, 2001-12-08 at 02:00, MaX wrote:
> Hi all,
>
> I'm working in a Apple wallstreet with Debian/sid.
> Now for my work in office i need to write in spanish language, so i need
> to generate the extended ascii charather like "n+tilde" or "e grave".
>
to obtain the same MacOS-layout in my debian?
tnx
MaX
--
Massimo Biffi LocTeam Barcelona - Spain
Debian/Sid on PowerBook Apple G3
On Sat, 2001-12-08 at 02:00, MaX wrote:
> Hi all,
>
> I'm working in a Apple wallstreet with Debian/sid.
> Now for my work in office i need to write in spanish language, so i need
> to generate the extended ascii charather like "n+tilde" or "e grave".
>
to obtain the same MacOS-layout in my debian?
tnx
MaX
--
Massimo Biffi LocTeam Barcelona - Spain
Debian/Sid on PowerBook Apple G3
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
the way, i'm running the stable-dist of debian...
thanks
Max Koszela
[EMAIL PROTECTED]
By the way, i'm running the stable-dist of debian...
thanks
Max Koszela
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
servers
on your network, if you are running WINS, you
might like to try the WINS servers (they might be running DNS as well).
That's it.
Max
Tuesday, October 09, 2001, 11:49:38 PM, Max wrote:
ME> I just want to thank Glen for asking that question on how to configure
your
ME> network
servers
on your network, if you are running WINS, you
might like to try the WINS servers (they might be running DNS as well).
That's it.
Max
Tuesday, October 09, 2001, 11:49:38 PM, Max wrote:
ME> I just want to thank Glen for asking that question on how to configure
your
ME> network
I just want to thank Glen for asking that question on how to configure your
network card
on PCMCIA, cos I've just got mine to work - DHCP et al. I am, for once, a
very happy bunny!
If you get hassles with network setting up, forget about configuring
/etc/networks/interfaces
cos it will only mess
I just want to thank Glen for asking that question on how to configure your
network card
on PCMCIA, cos I've just got mine to work - DHCP et al. I am, for once, a
very happy bunny!
If you get hassles with network setting up, forget about configuring
/etc/networks/interfaces
cos it will only mess
.
I think I messed up the installation, but don't know how to go back to
itcan someone give me a hand.
Thanks
Max
?bcbYkq7AsWy6dCQp
regards,
MaX
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Alle ore 12:50, giovedì 14 giugno 2001, Alex Kwan ha scritto:
> Hi!
>
> How to un-packed a debian kernel image package?
> (not install, un-packed only)
>
> Thanks!
A simply way is to select the packet with "mc" and press Enter.
--
Un saludo,
MaX
Massimo Biffi -
hi all,
I have some problems with the layout of keyboard on my Pmac (wall-street)
My distro is a potato 2.2.
My goal is obtain the same layout that I have on MacOS.
(I.E. Command+e for è, command+n for ñ and so on..)
There is the same layout on Linux?
--
Un saludo,
MaX
Massimo Biffi
Alle ore 12:50, giovedì 14 giugno 2001, Alex Kwan ha scritto:
> Hi!
>
> How to un-packed a debian kernel image package?
> (not install, un-packed only)
>
> Thanks!
A simply way is to select the packet with "mc" and press Enter.
--
Un saludo,
MaX
Massimo Biffi -
hi all,
I have some problems with the layout of keyboard on my Pmac (wall-street)
My distro is a potato 2.2.
My goal is obtain the same layout that I have on MacOS.
(I.E. Command+e for è, command+n for ñ and so on..)
There is the same layout on Linux?
--
Un saludo,
MaX
Massimo Biffi
; potato R0 upgraded
to R3 with APT.
Someone can send me a correct conf. ?
Best regards
MaX
--
Massimo Biffi - icq: 100756110 mail: [EMAIL PROTECTED]
LocTeam - Barcelona (Spain) - Localization Engineering
Mac OS X - debianPPC - debian i386 - Mac OS 9.1
Powered by:
Debian 2.2 Kernel 2.4.3 on
; potato R0 upgraded
to R3 with APT.
Someone can send me a correct conf. ?
Best regards
MaX
--
Massimo Biffi - icq: 100756110 mail: [EMAIL PROTECTED]
LocTeam - Barcelona (Spain) - Localization Engineering
Mac OS X - debianPPC - debian i386 - Mac OS 9.1
Powered by:
Debian 2.2 Kernel 2.4.3 on
47 matches
Mail list logo
