pretty happy with it; It's a worthy replacement for my trusty old A21p.
Jon Leonard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
all of them.
FUs set to debian-user, a fairly arbitrary choice.
--
Jon Dowland
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
than avoid
it, so I'd not go down that road.
--
Jon Dowland
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
additionally, cur or new should not even be a
consideration, as you would specify a Maildir to deliver to
in procmail with
:0
* some-test
$MAIL/MyMailDir/
--
Jon Dowland
http://alcopop.org/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
t want your
guest user to do. For my needs, a guest user on my laptop
comes with the correct permissions out-of-the-box (i.e. they
can't shutdown the box, they don't own mounts, they can't
read my $HOME...)
--
Jon Dowland
http://alcopop.org/
--
To UNSUBSCRIBE, email to [EM
that this
is a subtle driver issue to do with currents through wires acknowledged or
something...
Any ideas what it could be or how I could resolve
it?
Replies to
[EMAIL PROTECTED] please
Thanks, Jon
that this
is a subtle driver issue to do with currents through wires acknowledged or
something...
Any ideas what it could be or how I could resolve
it?
Replies to
[EMAIL PROTECTED] please
Thanks, Jon
gh. (That's from my .xinitrc: I start a power
monitor if there's no wired ethernet, and a web browser if there is.)
Jon Leonard
gh. (That's from my .xinitrc: I start a power
monitor if there's no wired ethernet, and a web browser if there is.)
Jon Leonard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I'm looking to buy a laptop that can easily be set up to run debian
linux. I do not need a high end graphics card, nor is there a real
need for a big screen. Being light weight is not a primary factor,
whereas rugged reliability would be. Can anyone suggest particular
brands and models that fit
I'm looking to buy a laptop that can easily be set up to run debian
linux. I do not need a high end graphics card, nor is there a real
need for a big screen. Being light weight is not a primary factor,
whereas rugged reliability would be. Can anyone suggest particular
brands and models that fit
shall i use?
Best Regards Jon
Lachmann
shall i use?
Best Regards Jon
Lachmann
/xf86config.lap.html
is this the right way of configuring this to use a
MS mouse or a touchboard?
Best Regards Jon
Lachmann.
/xf86config.lap.html
is this the right way of configuring this to use a
MS mouse or a touchboard?
Best Regards Jon
Lachmann.
on progress for both
these two.
Best Regards Jon
Lachmann
on progress for both
these two.
Best Regards Jon
Lachmann
e the intel one in the list of 2 choises and
i add no extra parameters in the following 3 boxes, has anyone else got this working
on such a computer?
Best Whishes Jon Lachmann.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
e the intel one in the list of 2
choises and i add no extra parameters in the following 3 boxes, has anyone else
got this working on such a computer?
Best Whishes Jon Lachmann.
Hello,
I have a toshiba libretto 50CT, the laptop has a 6.1" screen only
640x480 res.
I'm using ratpoison, and for my term, use 'rxvt', with the font 8x16,
the sony fixed font. The problem is that, this font and this screen
only allows for 79x27, afew of the apps I'm using require 80 columns.
M
it worth getting, say over a $79 Linksys Card?
TIA,
jon..
it worth getting, say over a $79 Linksys Card?
TIA,
jon..
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi,
I could not get the D-Link 650 to flash and/or even detect drivers, on
the windows disk... so I give up..
My question is, what is the best and easiest 802.11b PCMCIA card to buy
for linux these days? Linksys?
This computer does not have a Cardbus, only 16-bit.
TIA..
Hi,
I could not get the D-Link 650 to flash and/or even detect drivers, on
the windows disk... so I give up..
My question is, what is the best and easiest 802.11b PCMCIA card to buy
for linux these days? Linksys?
This computer does not have a Cardbus, only 16-bit.
TIA..
--
To UNSUBSCRIBE,
Hello,
I have a small laptop, P75 machine, with a PCMCIA card, and a D-Link
DWL-650 wireless card. Having alot of trouble getting this thing to
work, but I'm getting closer.
I'm using kernel 2.4.18 (because anything higher doesn't work on this
machine, its a bug), PCMCIA-cs 3.2.4, other cards w
Hello,
I have a small laptop, P75 machine, with a PCMCIA card, and a D-Link
DWL-650 wireless card. Having alot of trouble getting this thing to
work, but I'm getting closer.
I'm using kernel 2.4.18 (because anything higher doesn't work on this
machine, its a bug), PCMCIA-cs 3.2.4, other cards w
would appreciate it if anyone cold help me out on this.
Sincerely,
Jon
would appreciate it if anyone cold help me out on this.
Sincerely,
Jon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
the
man page for using DHCP. How can I do this? Also, how can I set this up so
that it is automatically brought up and configured with DHCP at boot time?
It case you all haven't guessed, I'm a "newbie', so I need all of the help I
can get ;-)
TIA,
Jon
-Original Message
the
man page for using DHCP. How can I do this? Also, how can I set this up so
that it is automatically brought up and configured with DHCP at boot time?
It case you all haven't guessed, I'm a "newbie', so I need all of the help I
can get ;-)
TIA,
Jon
-Original Message
config 3100 status 7809 advertising 01e1.
Then, lspci gives me this:
20:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
But ifconfig only shows a loopback adapter. Obiously, the system "sees" the
card, but it isn't be used. How can I fix this problem/
TIA,
Jon
config 3100 status 7809 advertising 01e1.
Then, lspci gives me this:
20:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
But ifconfig only shows a loopback adapter. Obiously, the system "sees" the
card, but it isn't be used. How can I fix this problem/
TIA,
Jon
config 3100 status 7809 advertising 01e1.
Then, lspci gives me this:
20:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
But ifconfig only shows a loopback adapter. Obiously, the system "sees" the
card, but it isn't be used. How can I fix this problem/
TI
config 3100 status 7809 advertising 01e1.
Then, lspci gives me this:
20:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
But ifconfig only shows a loopback adapter. Obiously, the system "sees" the
card, but it isn't be used. How can I fix this problem/
TI
ould add a route entry; so i do this "route add -host
> 10.0.0.3" to which i get the error code:
> SIOCADDRT: No such device.
You shouldn't need to add a route for a host that's on the same network
anyway.
Jon Leonard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
, I
> should add a route entry; so i do this "route add -host
> 10.0.0.3" to which i get the error code:
> SIOCADDRT: No such device.
You shouldn't need to add a route for a host that's on the same network
anyway.
Jon Leonard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
would umount whatever filesystem is
> on it. But in practice I once saw a PCMCIA connected drive (was it a
> type III? I forget) wedge when it was powered off, because it didn't want
> to umount fast enough. I hope pcmcia code has gotten better since those
> bad ol' days, but
would umount whatever filesystem is
> on it. But in practice I once saw a PCMCIA connected drive (was it a
> type III? I forget) wedge when it was powered off, because it didn't want
> to umount fast enough. I hope pcmcia code has gotten better since those
> bad ol' days, but
try if the door isn't there.
A side note: I've had some trouble after unmounting and ejecting my CF
card, in that Linux complains about a lost interrupt. This tends to cause
filesystem corruption as well, so I recommend the workaround of only
removing the card when the laptop is powered off.
Jon Leonard
try if the door isn't there.
A side note: I've had some trouble after unmounting and ejecting my CF
card, in that Linux complains about a lost interrupt. This tends to cause
filesystem corruption as well, so I recommend the workaround of only
removing the card when the laptop is power
A lot of my mail gets bounced back with since my machine doesn't have a fqdn
(mail looks like its from rsifox@ .
Netenv has a DOMAIN= setting, but this doesn't seem to affect
# hostname --fqdn
rsifox
how do I get it to represent my fully qualified domain name at work?
-- Jon
--
A lot of my mail gets bounced back with since my machine doesn't have a fqdn (mail
looks like its from rsifox@ .
Netenv has a DOMAIN= setting, but this doesn't seem to affect
# hostname --fqdn
rsifox
how do I get it to represent my fully qualified domain name at work?
-- Jon
--
kernel with APM support (or turn it off if it's
on), and also try turning off power-saving features in the BIOS.
Jon Leonard
kernel with APM support (or turn it off if it's
on), and also try turning off power-saving features in the BIOS.
Jon Leonard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
's page). My very similar notes are at:
http://slimy.com/~jleonard/config/index.html
Getting the FB console working was an important first step, complicated by the
fact that vga=ask doesn't accept the 885 mode, but that vga=885 in lilo.conf
does work.
Jon Leonard
's page). My very similar notes are at:
http://slimy.com/~jleonard/config/index.html
Getting the FB console working was an important first step, complicated by the
fact that vga=ask doesn't accept the 885 mode, but that vga=885 in lilo.conf
does work.
Jon Leonard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
er. Then points to detailed instructions for RPM.
Back when the v2 card was newer, I just copied the new tulip.c into the
pcmcia-cs source and built it. The v3 build may be as easy.
Jon Leonard
> driver. Then points to detailed instructions for RPM.
Back when the v2 card was newer, I just copied the new tulip.c into the
pcmcia-cs source and built it. The v3 build may be as easy.
Jon Leonard
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
he
output. Or just read the lilo-howto and figure things out.
Jon
he
output. Or just read the lilo-howto and figure things out.
Jon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
at/log/syslog for failed modprodes from the
cardmanager.
--
Jon
"Along with freedom of speech and freedom of assembly, there is
freedom to share generally useful information with other people.
This should be an inalienable right."
Richard M. Stallman, creato
at/log/syslog for failed modprodes from the
cardmanager.
--
Jon
"Along with freedom of speech and freedom of assembly, there is
freedom to share generally useful information with other people.
This should be an inalienable right."
Richard M. Stallman, creato
is somewhat helps. I'm still working out the kinks, but I can at
least offer some experience on the Dell CPx 650.
--Jon
_
Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com
ewhat helps. I'm still working out the kinks, but I can at
least offer some experience on the Dell CPx 650.
--Jon
_
Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com
--
To UNSUBSC
54 matches
Mail list logo
