you can find working used Realports (56k modem/ethernet) on the web for
around $50. They work great and no dongles.
Sean
On Friday 07 June 2002 14:58, Jeremy Turner hammered on some keys:
> > -Original Message-
> > From: Luis Mendes [mailto:[EMAIL PROTECTED]
> > I have a Toshiba Satell
On Fri, Jun 07, 2002 at 10:07:06PM +0100, Luis Mendes wrote:
>
> 1) Does the fact that both devices are in the same card affects in any
> way the ease of installation under woody or is it advisable to get
> separate cards for the two functions?
>
Like Jeremy, I too have a Xircom RealPort combo c
Hi,
Anybody has a Versa SX with a zip drive?
I can't find it anywhere. Maybe it was never produced. It's on the SX manual,
though.
thanks,
alberto
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
you can find working used Realports (56k modem/ethernet) on the web for
around $50. They work great and no dongles.
Sean
On Friday 07 June 2002 14:58, Jeremy Turner hammered on some keys:
> > -Original Message-
> > From: Luis Mendes [mailto:[EMAIL PROTECTED]]
> > I have a Toshiba Sate
On Fri, Jun 07, 2002 at 10:07:06PM +0100, Luis Mendes wrote:
>
> 1) Does the fact that both devices are in the same card affects in any
> way the ease of installation under woody or is it advisable to get
> separate cards for the two functions?
>
Like Jeremy, I too have a Xircom RealPort combo
Hi,
Anybody has a Versa SX with a zip drive?
I can't find it anywhere. Maybe it was never produced. It's on the SX manual,
though.
thanks,
alberto
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
> -Original Message-
> From: Luis Mendes [mailto:[EMAIL PROTECTED]
> I have a Toshiba Satellite 1800-314 with woody installed (kernel
> 2.4.17). Everything works fine except for the modem. After checking in
> linmodems.org my impression is that there is no hope to get it working
> proper
Hi there,
Strictly speaking my question is not a specific debian question, but
since I am running debian I hope you don't feel too annoyed by this
post...
I have a Toshiba Satellite 1800-314 with woody installed (kernel
2.4.17). Everything works fine except for the modem. After checking in
linm
I've tried using the standard battery monitor for Gnome, but it reports
the current battery status and then immediately dies and has to be
reloaded. I did configure it for ACPI. The other (battstat-applet)
constantly fluctuates between reporting the current chage and 0%, at
which point it throw
> "Juraj" == Juraj Bednar <[EMAIL PROTECTED]> writes:
[...]
Juraj> I've read the Infrared-HOWTO, etc. I'm unable to load nsc-ircc.o
Juraj> module, I don't even know if I need it.
You'll have to edit /etc/modutils/irda. At the end of the file it says:
# To use the NSC driver on a Thinkpad
> -Original Message-
> From: Luis Mendes [mailto:[EMAIL PROTECTED]]
> I have a Toshiba Satellite 1800-314 with woody installed (kernel
> 2.4.17). Everything works fine except for the modem. After checking in
> linmodems.org my impression is that there is no hope to get it working
> prop
Hi there,
Strictly speaking my question is not a specific debian question, but
since I am running debian I hope you don't feel too annoyed by this
post...
I have a Toshiba Satellite 1800-314 with woody installed (kernel
2.4.17). Everything works fine except for the modem. After checking in
lin
I've tried using the standard battery monitor for Gnome, but it reports
the current battery status and then immediately dies and has to be
reloaded. I did configure it for ACPI. The other (battstat-applet)
constantly fluctuates between reporting the current chage and 0%, at
which point it thro
Hi all,
I had asked before about the acpi events, and now found that acpid
(mine at
least...) doesnt notice those events, but the new daemon ospmd does! But: 1)
I couldnt get the gui to work, 2) there's no conf file examples and no
documentation!
So I ask... where I can find a
> "Juraj" == Juraj Bednar <[EMAIL PROTECTED]> writes:
[...]
Juraj> I've read the Infrared-HOWTO, etc. I'm unable to load nsc-ircc.o
Juraj> module, I don't even know if I need it.
You'll have to edit /etc/modutils/irda. At the end of the file it says:
# To use the NSC driver on a Thinkpad
Hi all,
I had asked before about the acpi events, and now found that acpid (mine at
least...) doesnt notice those events, but the new daemon ospmd does! But: 1)
I couldnt get the gui to work, 2) there's no conf file examples and no
documentation!
So I ask... where I can find a
Hello,
I have IBM Thinkpad a22m, I would like to dial out using my Nokia 6210
phone. I tried it on this notebook with freebsd, it worked with almost
no problems. Since the IRDA support is much different, I have really
trouble making it work under Debian GNU/Linux. I deleted freebsd
because of
Hello,
I have IBM Thinkpad a22m, I would like to dial out using my Nokia 6210
phone. I tried it on this notebook with freebsd, it worked with almost
no problems. Since the IRDA support is much different, I have really
trouble making it work under Debian GNU/Linux. I deleted freebsd
because o
18 matches
Mail list logo
