I have a single processor MacPro G5 "PowerMac7,3" running Jessie.
model : PowerMac7,3
machine : PowerMac7,3
motherboard : PowerMac7,3 MacRISC4 Power Macintosh
detected as : 336 (PowerMac G5)
I also have a dual core G5 "PowerMac11,2" but it's running MacOS-X.
The "7,
David Gosselin wrote:
> Are you testing on a PowerMac G5 7,3? Should be in /proc/cpuinfo.
> I have a 7,3 model and cannot load the windfarm driver. It appears
> that the hardware on the 7,3 is not supported. I’ve been working to
> update the therm_pm72 driver to use the probe interface instead
Ben Hutchings wrote:
> > Manually loading the i2c-powermac module results in fans that run at the
> > normal. expected low speed. I will be adding this to /etc/modules as a
> > workaround for this issue.
>
> Does it matter whether you load i2c-powermac before or after the
> windfarm modules?
Loa
Are you testing on a PowerMac G5 7,3? Should be in /proc/cpuinfo.
I have a 7,3 model and cannot load the windfarm driver. It appears that the
hardware on the 7,3 is not supported. I’ve been working to update the
therm_pm72 driver to use the probe interface instead of the attach_adapter
interf
On Sat, 2014-02-22 at 19:23 +1100, Erik de Castro Lopo wrote:
> Erik de Castro Lopo wrote:
>
> > Hi,
> >
> > A previosu message in this big suggested that the i2c_powermac module
> > may be involved.
> >
> > I can confirm that this module is missing completely for the 3.12 kernel
> > (there is
On Feb 22, 2014, at 12:23 AM, Erik de Castro Lopo wrote:
> Hi,
>
> I run debian testing on a dual G5 powermac.
>
> Just upgraded from linux-image-3.4-trunk-powerpc64 to
> linux-image-3.12-1-powerpc64 and found the same issue. The windfarm
> modules are loading but the about 30 seconds to a coup
Erik de Castro Lopo wrote:
> Hi,
>
> A previosu message in this big suggested that the i2c_powermac module
> may be involved.
>
> I can confirm that this module is missing completely for the 3.12 kernel
> (there is no module of that name in the /lib/modules/3.12-1-powerpc64/
> tree) whereas for
Hi,
A previosu message in this big suggested that the i2c_powermac module
may be involved.
I can confirm that this module is missing completely for the 3.12 kernel
(there is no module of that name in the /lib/modules/3.12-1-powerpc64/
tree) whereas for the 3.4 kernel this module is available and
8 matches
Mail list logo
