Re: Accessing windows share throught http

This is not feasible for three good reasons: 1. i would need to authenticate the access page so giving an username/password to anuy possible user, each one with its permissions. 2. I do not know in advance not only the users, but neither what are the possible shares to be used.

Accessing windows share throught http

username/password) via an access via port 80|443 on the web server, without need to open netbios ports outside localnet.. I do not remember the name of the package ... however !!! -- Leonardo Boselli Nucleo informatico e Telematico Dipartimento Ingegneria Civile Universita` di Firenze Via Santa Marta

dropping vs rejecting for non exixtent services

On some machine for which i can edvice but do not have final decision there sare some non-exixtent services. The administrator choose to drop packets sent to these ports. This led some legitimate users to long timeout delay before automatically switch to a different [active] service on another port

Re: status of VLAN support in Debian/Linux in general

kept as spare, an additional cable to an abandoned room would not be justified) > If you change to the new setup you will lose redundancy! > (if this is not the question you setup will be fine) > > Rgds, > j. > > > Leonardo Boselli wrote: > > Il 11 Sep 20

addenda to question about status of VLAN support in Debian/Linux in general

Il 12 Sep 2004 alle 12:31 Leonardo Boselli immise in rete > Just an information: > i will have a netgear 526T and a AT 8024 > my servers have one a NIC driven by e1000 module, the other by > 8139too . > Currently they have two nic each, one with 2 addresses and one w

Re: status of VLAN support in Debian/Linux in general

d is inconvenent to add more on a short term. Trunking the two subnet on the same wires would allow burst of traffic on one of the subnets to use 300 MB banwidth) ??? I use 2.4.26 deb kernels on both servers. -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Uni

Re: Cloning disks with dd and netcat

S-DOS' io.sys and msdos.sys expected to be in specific areas? only one of the two, in recent version, anyway as long the disk has the same number of sectors and heads they will end on the same place -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Univer

Re: Cloning disks with dd and netcat

FS filesystem:) just copy the "root"... by root i say /dev/hda , the raw partition. I worked fine for me many times. -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta 3 - I-50139 Firenze tel +39 0554796

Re: Which Spam Block List to use for a network?

, a first test could just to try to "call back" the other server, to see if it replyes to port 25. If it does, the bet on accept, if not go ahead with checking ... -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta

Re: Which Spam Block List to use for a network?

, a first test could just to try to "call back" the other server, to see if it replyes to port 25. If it does, the bet on accept, if not go ahead with checking ... -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta

Re: Which Spam Block List to use for a network?

On Thu, 24 Jun 2004, Mark Bucciarelli wrote: > > > I'm pretty sure this is incorrect. SPF checks the MAIL-FROM: header, > > > not From:, so I think this case should work fine ... > > are you sure ? i never see such header ! > Yes. See http://spf.pobox.com/faq.html that is mail from: not mail-fro

Re: Which Spam Block List to use for a network?

On Thu, 24 Jun 2004, Mark Bucciarelli wrote: > On Wednesday 23 June 2004 21:58, Jason Lim wrote: > > This also applies to most hosting companies. If your ISP prevents > > outgoing SMTP (port 25) to other mail servers and you are forced to use > > your ISP's mail servers, then the "mail server" is n

Re: Which Spam Block List to use for a network?

On Thu, 24 Jun 2004, Mark Bucciarelli wrote: > > > I'm pretty sure this is incorrect. SPF checks the MAIL-FROM: header, > > > not From:, so I think this case should work fine ... > > are you sure ? i never see such header ! > Yes. See http://spf.pobox.com/faq.html that is mail from: not mail-fro

Re: Which Spam Block List to use for a network?

On Thu, 24 Jun 2004, Mark Bucciarelli wrote: > On Wednesday 23 June 2004 21:58, Jason Lim wrote: > > This also applies to most hosting companies. If your ISP prevents > > outgoing SMTP (port 25) to other mail servers and you are forced to use > > your ISP's mail servers, then the "mail server" is n

PS: ethernet to parallel/serial converter

PS: grazie comunque dwell'interessamento ... quando dicevo "seriale" intendevo dire come meglioi descritto nel teso che anche un USB->parallelo andava bene lo stesso ... On 10 May 2004 at 16:33, emilio brambilla wrote: > > (even an USB one would fit) > Bye, > emil

Re: ethernet to parallel/serial converter

andato sono dei terminal server ! On 10 May 2004 at 16:33, emilio brambilla wrote: > hello, > > look at TS100 in this page: > http://www.cyclades.com/products/2/ts_series > > it's 100% linux based and you can also (cross)compile additional > software; it costs a few hun

PS: ethernet to parallel/serial converter

PS: grazie comunque dwell'interessamento ... quando dicevo "seriale" intendevo dire come meglioi descritto nel teso che anche un USB->parallelo andava bene lo stesso ... On 10 May 2004 at 16:33, emilio brambilla wrote: > > (even an USB one would fit) > Bye, > emil

Re: ethernet to parallel/serial converter

andato sono dei terminal server ! On 10 May 2004 at 16:33, emilio brambilla wrote: > hello, > > look at TS100 in this page: > http://www.cyclades.com/products/2/ts_series > > it's 100% linux based and you can also (cross)compile additional > software; it costs a few hun

ethernet to parallel/serial converter

would apopear on the output. optionally one byte of input . End of requirement Someone has helps to do or even a project to build it ? (even an USB one would fit) -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta 3 - I

ethernet to parallel/serial converter

would apopear on the output. optionally one byte of input . End of requirement Someone has helps to do or even a project to build it ? (even an USB one would fit) -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta 3 - I

Re: bandwidth

t i would double at least) anless they steam video, in whiuch case you go high ... -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta 3 - I-50139 Firenze tel +39 0554796431 cell +39 3488605348 fax +39 055495333 h

Re: bandwidth

hat will be a direct > link to a local backbone, with our own local firewall/bandwidth > sharing machine. My question is how much bandwidth should I ask for > with my local backbone to provide such universe of almost 96 home > computers with a reasonable internet access service? Th

Re: bandwidth

t i would double at least) anless they steam video, in whiuch case you go high ... -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta 3 - I-50139 Firenze tel +39 0554796431 cell +39 3488605348 fax +39 055495333 h

Re: bandwidth

hat will be a direct > link to a local backbone, with our own local firewall/bandwidth > sharing machine. My question is how much bandwidth should I ask for > with my local backbone to provide such universe of almost 96 home > computers with a reasonable internet access service? Th

Still no success: two router one host

? Where am i wrong ? On 14 Jan 2004 at 13:41, Fraser Campbell wrote: > On Thursday 15 January 2004 12:40, Leonardo Boselli wrote: > You need to use the iproute utility to create multiple routing tables > and a few routing rules. There are probably many ways to arrange your > rules but

Still no success: two router one host

? Where am i wrong ? On 14 Jan 2004 at 13:41, Fraser Campbell wrote: > On Thursday 15 January 2004 12:40, Leonardo Boselli wrote: > You need to use the iproute utility to create multiple routing tables > and a few routing rules. There are probably many ways to arrange your > rules but

two router one host

it working correctly. Also is there a script to change default route from one NIC to the Other if the connection is broken ? -- Leonardo Boselli Nucleo informatico e Telematico Dipartimento Ingegneria Civile Universita` di Firenze Via Santa Marta 3 I-50139 Firenze +39 055-4796-431 +39 348-8605-348 f

two router one host

it working correctly. Also is there a script to change default route from one NIC to the Other if the connection is broken ? -- Leonardo Boselli Nucleo informatico e Telematico Dipartimento Ingegneria Civile Universita` di Firenze Via Santa Marta 3 I-50139 Firenze +39 055-4796-431 +39 348-8605-348 f

Re: Debian on a Dell-Server???

On Fri, 2 Jan 2004, Peter Billson wrote: > Daniel, > Debain works fine on Dells. A couple tips assuming you are installing > from the Woody CD: > 1) Use the BF24 boot option so that you are installing a 2.4 kernel and > not the default 2.2 kernel I had anoter problem on a poweredge600: The driv

Re: Debian on a Dell-Server???

On Fri, 2 Jan 2004, Peter Billson wrote: > Daniel, > Debain works fine on Dells. A couple tips assuming you are installing > from the Woody CD: > 1) Use the BF24 boot option so that you are installing a 2.4 kernel and > not the default 2.2 kernel I had anoter problem on a poweredge600: The driv

Re: a new network and a newbie admin

reregister, but just log via software. > Maybe radius or you could setup 2 networks on your switch one none > routable [firewalled net] one [routable net]. Some server in between > would have to give permission and act as a gatekeeper. the approach is OS independent. -- Leonardo Boselli N

Re: two nic same server

On Thu, 9 Oct 2003, Dan MacNeil wrote: > Rod & Frode, > Thanks for your help. (Rod I took the liberty of replying to > the list w/o without your email as your answer may be helpful > to other people.) Hey ! My question was different. I appreciate your help, but my original question was different: I

two nic same serever

balancing but just increase availability, 2nd channel is very slow ...) -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta 3 - I-50139 Firenze tel +39 0554796431 cell +39 3488605348 fax +39 055495333 http://www.dicea.unifi.it/~leo

Apache and private hosts: link to proxy

would be nice to have it working also for https on arbitrary ports (of course: for hosts and ports well defined in advance !) Any idea ? -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta 3 - I-50139 Firenze tel +39

Re: splitting a subnet in an odd way

alle 9:25 Fraser Campbell immise in rete > On Wednesday 24 September 2003 10:47, Leonardo Boselli wrote: > > > I have a /24 subnet. > > .1 is the gateway and almost all IP from 2 to 254 are occupied. > > I would like to split the host in three groups: > > 12 that ca

Re: splitting a subnet in an odd way

255.255.255.0 secondfw ? for the possible various services (nb: the DNS are all in the 2/14 subnet) Il 25 Sep 2003 alle 1:09 Russell Coker immise in rete > On Thu, 25 Sep 2003 00:47, Leonardo Boselli wrote: > > I have a /24 subnet. > Have 1..14 as one subnet (15 is broadcast) and ha

splitting a subnet in an odd way

noted samba do noit appreciate much thgis behaviopur, whern two host are connecteds throught different rouytes and return packet come thought the other way !) ) -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta 3 - I-

Re: Software for WLAN Hotspot

then take appropriate > steps in the firewall/proxy...etc. > There was a thread about that a couple of months before. > Please dont go and buy a cisco box. I think we need a FLOSS VBN box in > debian. Im interested in doin it too. -- Leonardo Boselli Nucleo Informatico e Telematico del Di

Re: Question about system accounts in LDAP.

I woul use a different password for crypted and uncrypted channels ! On 12 Aug 2003, at 15:43, Stephane Bortzmeyer wrote: > On Tue, Aug 12, 2003 at 11:15:17AM +0200, > Leonardo Boselli <[EMAIL PROTECTED]> wrote > a message of 23 lines which said: > > > I am thinking a

Re: trouble in mgetty and auto ppp

t;couldnt find ppp0 interface" on > the client side . > > can u help me out wats goin wrong > > thnxs in advance > faizan > -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta 3 - I-50139 Firenze t

Re: Question about system accounts in LDAP.

and groups below GID 100. I am thinking about ist: is possible to use the ldap authentication for ALL BUT imap and ftp (that should use the passwd file -- Leonardo Boselli Nucleo informatico e Telematico Dipartimento Ingegneria Civile Universita` di Firenze Via Santa Marta 3 I-50139 Firenze

Re: Multi-Language Server

> > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta 3 -

Re: Default Apache 404 for all sites

ort of > workaround. > > Do you guys have some better method or idea, rather than copying the > 404.html webpage into all the sites? > > Thanks in advance. > > Jas > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe&q

Re: Default Apache 404 for all sites

ort of > workaround. > > Do you guys have some better method or idea, rather than copying the > 404.html webpage into all the sites? > > Thanks in advance. > > Jas > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe&q

RE: semi-remote net

r. Between the nearest wired building and that one there are a parking, and an abandoned field that turns in swamp in case of rain. Most people suggested me tat at 45o m i could even use two wireless AP without even a directive antenna althought i think a 6 dbi one would be nice. -- Leonardo Bos

RE: semi-remote net

r. Between the nearest wired building and that one there are a parking, and an abandoned field that turns in swamp in case of rain. Most people suggested me tat at 45o m i could even use two wireless AP without even a directive antenna althought i think a 6 dbi one would be nice. -- Leonardo Bos

semi-remote net

ng two wi-fi 2.4 GHz NIC, coupled to two dish antennas . Anyone here has experiences and suggestions on this setup ? -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta 3 - I-50139 Firenze tel +39 0554796431 cell +39 34886053

semi-remote net

ng two wi-fi 2.4 GHz NIC, coupled to two dish antennas . Anyone here has experiences and suggestions on this setup ? -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta 3 - I-50139 Firenze tel +39 0554796431 cell +39 34886053

Re: Server hacked - next...?

ries that do not match the checksums or > something? Does dpkg or some other Debian tool have this ability? The problem occurred me some months ago. My solution was to reinstall from scratch one machine, then just copyiing all binaries into the compromised one. It worked fine. -- Leonardo

Re: Server hacked - next...?

ries that do not match the checksums or > something? Does dpkg or some other Debian tool have this ability? The problem occurred me some months ago. My solution was to reinstall from scratch one machine, then just copyiing all binaries into the compromised one. It worked fine. -- Leonardo

IP over IP: moving host

t a tunnel to a machine in home network that would reinject to the router as if came from there. (or i could assign to the nmoved machine a private address, and tunnel to home network where traffic would be shown as local with home address) How to do ? -- Leonardo Boselli Nucleo Informatico e

IP over IP: moving host

t a tunnel to a machine in home network that would reinject to the router as if came from there. (or i could assign to the nmoved machine a private address, and tunnel to home network where traffic would be shown as local with home address) How to do ? -- Leonardo Boselli Nucleo Informatico e

Re: Antivirus license

On 12 Jun 2003 at 16:06, Russell Coker wrote: > On Thu, 12 Jun 2003 15:44, Leonardo Boselli wrote: > > I do not address the license problem, but rather the utility of a n > > antivirus for e-mail . > > Such beast hogs the server, and give a false sense of safety to user. >

Re: Antivirus license

(clamav, openantivirus, etc) are stable enough? > They get updated fast enough? -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta 3 - I-50139 Firenze tel +39 0554796431 cell +39 3488605348 fax +39 055495333 http://www.dicea.unifi.it/~leo

Re: Antivirus license

On 12 Jun 2003 at 16:06, Russell Coker wrote: > On Thu, 12 Jun 2003 15:44, Leonardo Boselli wrote: > > I do not address the license problem, but rather the utility of a n > > antivirus for e-mail . > > Such beast hogs the server, and give a false sense of safety to user. >

Re: Antivirus license

(clamav, openantivirus, etc) are stable enough? > They get updated fast enough? -- Leonardo Boselli Nucleo Informatico e Telematico del Dipartimento Ingegneria Civile Universita` di Firenze , V. S. Marta 3 - I-50139 Firenze tel +39 0554796431 cell +39 3488605348 fax +39 055495333 http://www.dic

multiple hisax ?

can i put more than one hisax driven card in the same machine ? either the same model or different ? -- Leonardo Boselli Nucleo informatico e Telematico Dipartimento Ingegneria Civile Universita` di Firenze Via Santa Marta 3 I-50139 Firenze +39 055-4796-431 +39 348-8605-348 fax 055-495-333

multiple hisax ?

can i put more than one hisax driven card in the same machine ? either the same model or different ? -- Leonardo Boselli Nucleo informatico e Telematico Dipartimento Ingegneria Civile Universita` di Firenze Via Santa Marta 3 I-50139 Firenze +39 055-4796-431 +39 348-8605-348 fax 055-495-333