Modestas Vainius wrote:
> Have you tested the patch? Does it work for you?
Not yet as I must figure what I need to recompile first. Will do and
tell you as anyway I need it to work: on some album, all title have
frech character and it upload just nothing on the device ;-)
--eric
--
To UNSUB
Modestas Vainius wrote:
> forwarded 473271 http://bugs.kde.org/show_bug.cgi?id=147342
> thanks
>
> 2008 m. March 29 d., Saturday, Eric Valette rašė:
>> see upstream bug http://bugs.kde.org/show_bug.cgi?id=147342.
>> Could you rebuild with the patch attached.
> The pat
Package: amarok
Version: 1.4.8-2
Severity: normal
Tags: patch
see upstream bug http://bugs.kde.org/show_bug.cgi?id=147342.
Could you rebuild with the patch attached.
Thanks.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: am
Eric Valette wrote:
> Modestas Vainius wrote:
>
>> Have you tested the patch? Does it work for you?
>
> Not yet as I must figure what I need to recompile first. Will do and
> tell you as anyway I need it to work: on some album, all title have
> frech character and it up
Modestas Vainius wrote:
> Hi,
>
> 2008 m. March 29 d., Saturday, Eric Valette rašė:
>> Code is already there as if the patch has already been applied but does
>> not work for me.
> Now try under UTF-8 locale. Generate it with `dpkg-reconfigure locales', then
Modestas Vainius wrote:
> Hi,
>
> 2008 m. March 30 d., Sunday, Eric Valette rašė:
>> Well I upgraded the firmware of the device this morning, and now it
>> seems to work with or without the LANG setting???
> With patched amarok or plain 1.4.8-2 ?
>
>
With
Package: sun-java6-bin
Version: 6-04-2
Severity: grave
Justification: renders package unusable
As nobody seems to care, I open a bug
apt-get install sun-java6-jre
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Certains paquets
Package: openoffice.org-impress
Version: 1:2.4.0~rc5-1
Severity: important
Here is a gdb session:
c
Continuing.
(no debugging symbols found)
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb51bd720 (LWP 6133)]
0xac5e9ddd in ?? () from /usr/lib/openoffice/program/vclc
On 12/11/2010 23:49, Otavio Salvador wrote:
On Fri, Nov 12, 2010 at 8:22 PM, valette wrote:
Bus 004 Device 002: ID 04fc:05d8 Sunplus Technology Co., Ltd Wireless
keyboard/mouse<===
I managed to identify the need of hid-sunplus to get this to work. I
have queued it for next kernel update.
O
On 13/11/2010 12:03, Otavio Salvador wrote:
It would be good if you could give a try to the installer. You won't
need to reinstall the system just boot the new one and see if has hot
it to work.
OK. I can wait a bit anyway as the machine is running but as XBMC + pvr
recors reading skips a bit
On 13/11/2010 12:52, Otavio Salvador wrote:
On Sat, Nov 13, 2010 at 9:48 AM, Eric Valette wrote:
On 13/11/2010 12:03, Otavio Salvador wrote:
It would be good if you could give a try to the installer. You won't
need to reinstall the system just boot the new one and see if has hot
it to
Package: openoffice.org-core
Version: 1:3.2.1-8
Severity: grave
Justification: renders package unusable
Paramétrage de openoffice.org-core (1:3.2.1-8) ...
file:///usr/lib/openoffice/basis3.2/program/libbf_migratefilterlx.so
register component
'file:///usr/lib/openoffice/basis3.2/program/libbf_mi
On 11/15/2010 09:08 AM, Rene Engelhard wrote:
Wrong. It's an install failure, so it's serious per definition (still RC, so..)
grave is for *runtime* problems.
Fine with me.
Paramétrage de openoffice.org-core (1:3.2.1-8) ...
file:///usr/lib/openoffice/basis3.2/program/libbf_migratefilterlx.s
On 11/15/2010 11:32 AM, Eric Valette wrote:
On 11/15/2010 11:29 AM, Rene Engelhard wrote:
Hi,
On Mon, Nov 15, 2010 at 10:02:17AM +0100, Eric Valette wrote:
And the obvious notice: In -8 nothing in that place changed.
ii ttf-opensymbol 2:2.3.9+LibO3.3.0~beta2-2 OpenSymbol TrueType font
ii
On 11/15/2010 11:29 AM, Rene Engelhard wrote:
Hi,
On Mon, Nov 15, 2010 at 10:02:17AM +0100, Eric Valette wrote:
And the obvious notice: In -8 nothing in that place changed.
ii ttf-opensymbol 2:2.3.9+LibO3.3.0~beta2-2 OpenSymbol TrueType font
ii ure1.7.0+LibO3.3.0~beta2-2
On 11/15/2010 11:44 AM, Rene Engelhard wrote:
Hi,
On Mon, Nov 15, 2010 at 11:32:40AM +0100, Eric Valette wrote:
Which probably was "clean" and didn't have the ure from experimental.
I tested install on my work PC wiich did have ure but as It
prevented to run openoffice (missi
Package: debian-installer
Version: Debian Installer 14/11/2010
Severity: important
Tags: d-i
I reinstalled a machine this week-end. The install base smootly worked.
I created a separate /tmp file system that was monted but with wrong permission.
root.root 755. Visible effect is that kdm login loop
Package: vdpau-va-driver
Version: 0.6.3-1
Severity: wishlist
In addition, the recently pushed libva does not seem to like the current library
vainfo
libva: libva version 0.31.1
Xlib: extension "XFree86-DRI" missing on display ":0.0".
libva: va_getDriverName() returns 0
libva: Trying to open /us
On 27/10/2010 15:53, Cyril Brulebois wrote:
valette (27/10/2010):
Due to dependency, current experimental is incompatible with Intel
drivers. I'm used to compile libdrm and intel driver myself but
they seem to be incompatible with mesa 7.8.2.
What are the exact issues you're having? Which pa
On 28/10/2010 12:13, Cyril Brulebois wrote:
Eric Valette (28/10/2010):
When compiling from source libdrm and xf86-video-intel I now get
crashes inside mesa-7.8.2. Compiling mesa is quite difficult as
configuration options have changed.
for ref see<http://intellinuxgraphics.org/2010Q3.h
On 28/10/2010 16:45, Cyril Brulebois wrote:
Eric Valette (28/10/2010):
IOW that's what I suspected from your subject: you got it wrong.
OK. Then get me […]
You don't get to give me orders. I'm going to ignore you now.
I do not care. I do care when :
1) you tell me I don&#
On 28/10/2010 20:39, Andrew O. Shadoura wrote:
Hello.
On Monday 13 September 2010 11:52:51 Eric Valette wrote:
As subject says, its a weird problem, as neither the config file is
broken but changing timing slightly make it work. It fails alaos with lo
so it is not a driver problem. I guess the
Package: apt
Version: 0.8.10+expnewsolvers2
Severity: minor
apt-get -t experimental install python-gobject python-gobject-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer requir
Package: xserver-xorg-core
Version: 2:1.9.3.901-1
Severity: important
I did not chnage my config. X log shows the USB kerboard but I cannot enter
anything.
I changed the driver to vesa to be sure its not related toNVIDIA, no chnage. I
undocked my laptop and restarted from scratch, no chnage.
KD
Can be closed.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: icedove
Version: 3.1.4-1
Severity: important
Tags: experimental
Besides behing prompted fro several password (3 times = 1 for all mail accounts
+ 2 for news (user + password))
which alreday annoys me but is a news bug known upstream, if I do not anwser
quickly enough (e.g I launch
iced
Package: w-scan
Version: 20101001-1
Severity: minor
do w_scan -h and look at the -M flag.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.36 (SMP w/2 CPU cores; PREEMPT)
Lo
I reattach it here
--eric
--- a/xpcom/reflect/xptinfo/src/xptiInterfaceInfoManager.cpp
+++ a/xpcom/reflect/xptinfo/src/xptiInterfaceInfoManager.cpp
@@ -629,16 +629,17 @@ IndexOfDirectoryOfFile(nsISupportsArray* aSearchPath,
nsILocalFile* aFile)
NS_ASSERTION(count, "broken search
Normally its a critical bug when you cannot rebuild...
-- eric
On 08/20/2010 02:36 PM, Christophe Mutricy wrote:
Hello,
Why are you highjacking a bug report about libmatroska for a bug on vlc ?!
I'm reporting that with current availble matroska package in
unstable+experimental, you cannot build experimental vlc and yes I did a
build-dep but since matros
On 08/20/2010 02:37 PM, Jonas Smedegaard wrote:
On Fri, Aug 20, 2010 at 02:03:24PM +0200, Eric Valette wrote:
Normally its a critical bug when you cannot rebuild...
True. It is a so-called FTBFS (Failure to build from source).
The appropriate severity should be tagged no matter the branch
Package: nvidia-kernel-source
Version: 195.36.31-2
Severity: normal
I put normal instead of wishlist because as far as I know 195.x
does not compile with recent kernel.
-- Package-specific info:
uname -a:
Linux r-x-ceva6380 2.6.35.3 #2 SMP PREEMPT Tue Aug 24 10:07:32 CEST 2010 i686
GNU/Linux
/
On 10/07/2010 13:27, David Kalnischkies wrote:
Hi valette!
2010/7/10 valette:
As package was not copiled for amd64 arch I tried to compile it myself.
I found an error related to constness of va_list type in error.cc
Thanks for testing and the patch& sorry for the inconvenience.
BTW: the -t
Package: cups
Version: 1.4.2-3
Severity: grave
Justification: renders package unusable
I tested printing on a posscript printer. It failed. I then opened the web
admin to see that pdftopdf was causing the problem. Trying to run it manually
let to this:
/usr/lib/cups/filter/pdftopdf
/usr/lib/cup
Package: iceweasel
Version: 3.5.5-1
Severity: important
Null pointer deref has shwon below. I cannot browse more than 40s before I
trigger the bug whatever the pages are.
iceweasel -g
GNU gdb (GDB) 7.0-debian
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or
On 04/12/2009 23:03, Mike Hommey wrote:
On Fri, Dec 04, 2009 at 10:44:01PM +0100, Eric Valette wrote:
Package: iceweasel
Version: 3.5.5-1
Severity: important
Null pointer deref has shwon below. I cannot browse more than 40s before I
trigger the bug whatever the pages are.
Can you try
tred with -safe-mode and no more crash. Quite strange: I haven chnaged
the pluggins for a while except automatic update...
Grrr. Now I must find the culprit.
-- eric
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact list
Subject says all
-- eric
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
On 27/12/2009 13:20, Anton Zinoviev wrote:
Indeed copying ckbcomp to /bin instead of /usr/bin fixes the problem.
Yes, I can confirm this. Setupcon tests the existence of ckbcomp even
when it doesn't require ckbcomp. Thanks for the debugging.
When this bug is fixed (maybe in the next upload
On 27/12/2009 10:20, Martin Michlmayr wrote:
You like crying over spilt milk, don't you?
Probably as you like breaking other hardware inadvertently...
We support a lot of NAS
devices and I cannot test every single change on every device.
You should. You cannot rely on every single users ha
On 04/01/2010 13:00, Martin Michlmayr wrote:
Eric,
Here are instructions to fix your DNS-323. I've tested them on my
machine.
Thanks. My DNS323 is up and running with its mtd again. Hope I was
nearly the only one.
BTW I used a modified flash-kernel script to generate the images and I
thin
Package: iceweasel
Version: 3.5.4-1
Severity: important
This is new and I dunno when it started. Currently maybe one out of five tab
close crash the entire browser.
Will try to add a backtrace to this when I have time.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
dpkg --purge python2.4
dpkg : un problème de dépendance empêche la suppression de python2.4 :
xbmc-bin dépend de python2.4 (>= 2.3.90).
dpkg : erreur de traitement de python2.4 (--purge) :
problème de dépendance - suppression ignorée
So actually on my machine, xbmc package is the last one to de
Package: icedove
Version: 2.0.0.22-1
Severity: wishlist
I started testing the following dayly build
http://ppa.launchpad.net/ubuntu-mozilla-daily/ppa/ubuntu/pool/main/t/thunderbird-3.0/
And it works like a charms + fies a long standing bug in html mail parsing. In
addition
it does not destroy th
I'm very interested in those new features for my HTPC
--eric
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
NB: changing the root server enables to download the complete file
instead of diff.
-- eric
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
On 22/12/2009 08:29, Mike Hommey wrote:
Hi,
Are you both running KDE and using KDE/Qt styles for Gtk applications ?
My experience is that it was mostly related to use of flash plugin. I
hardly have the problem anymore on my side.
-- eric
--
To UNSUBSCRIBE, email to debian-bugs-dist-req
Package: linux-2.6
Version: 2.6.32-2
Severity: critical
Justification: breaks unrelated software
The previous kernel has probably a bug as I have /proc/mtd empty and no
/dev/mtdblks! I will never be able to update a kernel unless
I mange to get access to the flash again!
-- Package-specific info
Is there any method to recreate mdt devices by hand so that I can get
back a new mtd enabled kernel?
Attached is the previous mapping using the 31 kernel.
-- eric
Dec 13 06:25:08 dlinkNas kernel: imklog 4.4.2, log source = /proc/kmsg started.
Dec 13 22:49:31 dlinkNas kernel: [134936.910239]
On 23/12/2009 22:09, Martin Michlmayr wrote:
* Eric Valette [2009-12-23 21:05]:
The previous kernel has probably a bug as I have /proc/mtd empty and
no /dev/mtdblks! I will never be able to update a kernel unless I
mange to get access to the flash again!
Is this on a D-Link DNS-323? If so
On 23/12/2009 23:25, Martin Michlmayr wrote:
* Eric Valette [2009-12-23 22:07]:
Is there any method to recreate mdt devices by hand so that I can get
back a new mtd enabled kernel?
Try:
modprobe cfi_cmdset_0002
I already did before posting but it does not work. No error message but
On 24/12/2009 00:16, Eric Valette wrote:
modprobe cfi_cmdset_0002
Correction: I reinstalled the
linux-image-2.6.32-trunk-orion5x_2.6.32-1_armel.deb (of course the flash
part failed but the modules where back in sync with kernel config) and
loaded the modules. But it did not recreate any
Found in version should be 2.6.32-1 not 2.6.32-2. Its the 2.6.32-1
kernel that has problem.
Besides, If anyone can guaranty I will be able to fix my problem OK for
normal, but so far, I'm still skeptical: without the mdt devices, I
cannot flash any new kernel version.
Modprobing the correct
On 24/12/2009 16:14, Martin Michlmayr wrote:
* Eric Valette [2009-12-24 00:11]:
Yes it is on a DNS 323. But how will this be fixed? Is it possible to
recreate the mtd devices after having flashed a kernel without proper
in kernel support? Or will you find a way to upload the drivers via
On 24/12/2009 16:47, Eric Valette wrote:
If loading the module doesn't work, I see
two possibilities to recover your machine:
- maybe you can use kexec to execute a good kernel and then write it
to flash.
What is the correct procedure and what kernel is supposed to work?
kexec -l
On 24/12/2009 16:14, Martin Michlmayr wrote:
- use the serial console (as documented on my web page).
Just in case as I do not want to make a full reinstall. I have in /boot
initrd.img-2.6.31-1-orion5x and vmlinuz-2.6.31-1-orion5x that works as
it flashed the .32-1. How can I recreate corr
On 25/12/2009 17:54, Martin Michlmayr wrote:
* Eric Valette [2009-12-24 18:08]:
Reading flash-kernel, I can probably rewrite it to skip the mtd check
but I would rather be sure that this will be understood by uboot
rather using kermit and uboot command rather than writing it directly
to mtd
Package: console-setup
Version: 1.50
Severity: normal
I had a file system witha date set in the future, and thus entered single mode.
I had
then a wrong keyboard which is annoying because when you are in this mode you
are likely to kill your machine if using the wrong key (even enetring the
pass
On 26/12/2009 14:52, Anton Zinoviev wrote:
On Fri, Dec 25, 2009 at 09:35:42PM +0100, Eric Valette wrote:
I had a file system witha date set in the future, and thus entered
single mode. I had then a wrong keyboard
This shouldn't be happening so I need you to make few tests in order t
On 26/12/2009 17:04, Eric Valette wrote:
On 26/12/2009 14:52, Anton Zinoviev wrote:
On Fri, Dec 25, 2009 at 09:35:42PM +0100, Eric Valette wrote:
I had a file system witha date set in the future, and thus entered
single mode. I had then a wrong keyboard
This shouldn't be happening so I
On 26/12/2009 17:18, Debian Bug Tracking System wrote:
This is an automatic notification regarding your Bug report
which was filed against the linux-2.6 package:
#562205: linux-image-2.6.32-trunk-orion5x: Not more mtd device => impossible
to flash new kernel
It has been closed by Ben Hutching
BTW readding the scripts, it look like the bug is more in console-common
and that for some reason, the /etc/console/boottime.kmap.gz does not get
loaded.
I entered rescue mode again and did the loadkeys
/etc/console/boottime.kmap.gz and got my french keyboard back.
Unfortunately I had still
On 26/12/2009 17:39, Eric Valette wrote:
Here are the buggy lines in keymap.sh
# If setupcon is present, then we've been superseded by console-setup.
if type setupcon >/dev/null 2>&1; then
exit 0
fi
because console-setup is run tto late in case of voluntary single m
On 26/12/2009 18:11, Eric Valette wrote:
On 26/12/2009 17:39, Eric Valette wrote:
Here are the buggy lines in keymap.sh
# If setupcon is present, then we've been superseded by console-setup.
if type setupcon >/dev/null 2>&1; then
exit 0
fi
because console-setup is run tto
On 26/12/2009 18:59, Martin Michlmayr wrote:
Except I can no more update my kernel because it use the mtdblock
devices => the bug is not fixed for me as it requires more than
providing a correct kernel. You need also to provide a way to reflash
it.
We told you already - you need a serial cons
On 26/12/2009 20:16, Anton Zinoviev wrote:
On Sat, Dec 26, 2009 at 06:39:13PM +0100, Eric Valette wrote:
I tested manually after entering the maintenance mode S06keyboard-setup
and yes it does print something and does a "setupcon -k" but the
keyboard is still wrong after the
I finally found the bug: I traced setupcons -k in error mode and it
expects to find ckbcomp but unfortunately /usr is not mounted and
ckbcomp is /usr/bin/ckbcomp
I traced the setupcons -k with set -x and it exist with doing anyting
because it does not find ckbcomp in the path.
-- eric
On 26/12/2009 22:47, Eric Valette wrote:
I finally found the bug: I traced setupcons -k in error mode and it
expects to find ckbcomp but unfortunately /usr is not mounted and
ckbcomp is /usr/bin/ckbcomp
I traced the setupcons -k with set -x and it exist with doing anyting
because it does not
I broke my setting with the libc upgrade this morning. But recreating
the symbolic links indeed fixed the problem.
For those who want a method to rescue: take a netinst iso, or whatever
linux rescue or live disk you prefer. Mount the linux disk / and /usr
file system somewhere (with debian net
Package: ketchup
Version: 0.9.8+hg5533f6de130c-3
Severity: normal
Tags: upstream
Wanted to use ketchup in one of my script to test 3.0.0-rc5 and it failed.
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i
https://github.com/psomas/ketchup/raw/linux-3/ketchup
-- eric
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Looking at mesa code I get this:
struct intel_region *region = irb ? irb->region : NULL;
brw_add_validated_bo(brw, region->buffer);
So region may be set to null under cetain condition but is dereferenced
the line after!
--eric
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@list
http://cgit.freedesktop.org/mesa/mesa/commit/?id=13bab58f04c1ec6d0d52760eab490a0997d9abe2
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
ifup lo
ifup: failed to open statefile /etc/network/run/ifstate: No such file or
directory
cd /etc/network/run
bash: cd: /etc/network/run: Aucun fichier ou dossier de ce type
root@funtwist:/home/valette# ls -l /etc/network/run
lrwxrwxrwx 1 root root 16 15 déc. 00:36 /etc/network/run ->
/dev/s
On 20/04/2011 22:00, Marco d'Itri wrote:
On Apr 20, Eric Valette wrote:
bash: cd: /etc/network/run: Aucun fichier ou dossier de ce type
I know, but this is a bug in ifupdown.
OTOH, I can't see why it would slow down the boot process.
As the kde start was very slow (about 2 mi
Package: minidlna
Version: 1.0.18-5
Severity: important
Lathough I chnaged the /opt default value, minidlna still looks multimedia file
here.
minidlna -d -f /etc/minidlna.conf
[2011/05/15 20:53:34] minidlna.c:770: warn: Starting MiniDLNA version 1.0.18
[SQLite 3.7.6.2].
[2011/05/15 20:53:34] mi
Package: iceweasel
Version: 3.5.17-1
Severity: wishlist
I used to have 3.6.13 from experimental. Now experimental contains 4.0-rc1 but
unstable still has the old 3.5.15. I have plugins that requires at least 3.6
(e.g brief). Modifying the install.rdf does not work.
Coud you push 3.6.x to unsta
Package: kernel-package
Version: 12.036+nmu1
Severity: normal
For yeras I have been compiling my kernel using a source directory
and a build directory.
make O=/.../mytargetdirectory
and buid own brewed script to build various drivers like nvidia.
Now that nvdia proprietary driver seems to be fai
Package: lilo
Version: 1:23.1-2
Severity: normal
Tags: upstream
see
https://alioth.debian.org/frs/shownotes.php?release_id=1670
Fix for larger kernel setup code (needed for kernel >= 2.6.36)
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
On Fri, 27 Jul 2018 12:09:22 +0800 Carsten Schoenert
wrote:
Hello Eric,
On Thu, Apr 05, 2018 at 09:35:01PM +0200, Eric Valette wrote:
> Wanted to send an event as a reminder and was uable to vreate the
> event either by clicking, or keyboard.
how this looks like in recent vers
Again linux <->linux OK. Android <-> Android OK . Linux <-> Android KO.
See upstream bug 394646 where someone has the same behavior. Contacted
devled list. No help.
Should be easy for soemeone who know the protocol to debug but with
qtnetwork, it is even hard to see what goes on the wire, a
Package: python3-minimal
Version: 3.6.5-4
Severity: normal
Paramétrage de python3-minimal (3.6.5-4) ...
cannot read debian_defaults
Traceback (most recent call last):
File "/usr/share/python3/debpython/version.py", line 58, in
for i in _supported.split(','))
File "/usr/share/python3/debp
Package: clementine
Version: 1.3.1+git542-gf00d9727c+dfsg-1
Severity: normal
While trying to get rid of qt4 on my computer I found that although using qt5,
it still has
libqt4-sql-sqlite dependency instead of libqt5sql5-sqlite
-- System Information:
Debian Release: buster/sid
APT prefers unsta
Package: exim4-config
Version: 4.91-5
Severity: grave
Justification: renders package unusable
apt-get -f install
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
0 mis à jour, 0 nouvellement installés, 0 à enlever et
On 6/10/18 7:07 AM, Andreas Metzler wrote:
On 2018-06-10 積丹尼 Dan Jacobson wrote:
Oops. I mean just:
Setting up exim4-config (4.91-5) ...
/etc/exim4/update-exim4.conf.conf: line 26: dc_eximconfig_configtype: command
not found
Hello,
Are you running bash (or other stuff) from experimental? II
On 6/10/18 10:33 AM, Debian Bug Tracking System wrote:
This is an automatic notification regarding your Bug report
which was filed against the exim4-config package:
But now how do we fix the problem? I will reopen until I have a fix.
Putting dash as /bin/sh does fix anything BTW.
-- eric
On 6/10/18 10:34 AM, Eric Valette wrote:
line 330 :export dc_directives ${dc_directives}
Shodul be export dc_directives=${dc_directives} as far as I understand.
-- eric
On 6/10/18 10:51 AM, Eric Valette wrote:
On 6/10/18 10:34 AM, Eric Valette wrote:
line 330 :export dc_directives ${dc_directives}
Shodul be export dc_directives=${dc_directives} as far as I understand.
To fix I did :
1) use dash temporarilly
2) /etc/exim4/update-exim4
On 6/10/18 10:59 AM, Eric Valette wrote:
On 6/10/18 10:51 AM, Eric Valette wrote:
2) mv /etc/exim4/update-exim4.conf.conf
/etc/exim4/update-exim4.conf.conf.old
On 6/10/18 11:35 AM, Andreas Metzler wrote:
exports both dc_directives and any variable listed in dc_directives,
i.e. any external command will see both ${dc_directives} and
${dc_eximconfig_configtype} et al.
right but did you intent that? The rest of the script seems not to use
explicitly an
On 6/10/18 11:57 AM, Eric Valette wrote:
On 6/10/18 11:35 AM, Andreas Metzler wrote:
exports both dc_directives and any variable listed in dc_directives,
i.e. any external command will see both ${dc_directives} and
${dc_eximconfig_configtype} et al.
right but did you intent that? The rest of
Been biten by this one. The problem id that kdedu
now install it via minuet. I will rise the criticity because it
break audio on kde now.
-- eric
See
http://www.nvidia.com/Download/driverResults.aspx/135161/en-us
http://www.nvidia.com/Download/driverResults.aspx/135161/en-us
Just a quick note to say that indeed the proposed
patch to look for DRI modules at the right place is working.
However, I have a bunch of other problems since driver update
even with the fix in place:
Sddm does not start. I get only a black sc
On 6/28/18 7:16 PM, Jiri Palecek wrote:
Are you using xserver 1.20 from unstable or 1.19.6 from testing? I've
had similar problems when I updated, and they went away when I
downgraded xserver-xorg-core.
1.20 from unstable.
-- eric
Package: upower
Version: 0.99.8-1
Severity: grave
Justification: renders package unusable
I had no upowerd daemon running on all my boxes:
Jul 02 20:52:00 htpc1 systemd[1]: Starting Daemon for power management...
Jul 02 20:52:01 htpc1 upowerd[1106]: /usr/lib/upower/upowerd: error
while loading
On Tue, 3 Jul 2018 07:34:32 +0200 Michael Biebl
wrote:
> Duplicate of
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=902411
True but both bugs are closed and I'm having 5 computers that
exhibit the problem and probably anybody that runs experimental for
Please fix the dependency. So far I was using libssl-dev and kde -dev
packages without problems.
-- eric
801 - 900 of 1112 matches
Mail list logo
