Is there any method to recreate mdt devices by hand so that I can get back a new mtd enabled kernel?
Attached is the previous mapping using the 31 kernel. -- eric
Dec 13 06:25:08 dlinkNas kernel: imklog 4.4.2, log source = /proc/kmsg started. Dec 13 22:49:31 dlinkNas kernel: [134936.910239] nfsd: last server has exited, flushing export cache Dec 13 22:49:34 dlinkNas kernel: [134939.763043] md: md2 still in use. Dec 13 22:49:34 dlinkNas kernel: [134939.767120] md: md1 still in use. Dec 13 22:49:34 dlinkNas kernel: [134939.773072] md: md0 still in use. Dec 13 22:49:34 dlinkNas kernel: [134939.778034] md: md2 still in use. Dec 13 22:49:34 dlinkNas kernel: [134939.784543] md: md1 still in use. Dec 13 22:49:34 dlinkNas kernel: [134939.789018] md: md0 still in use. Dec 13 22:49:35 dlinkNas kernel: Kernel logging (proc) stopped. Dec 19 16:04:49 dlinkNas kernel: imklog 4.4.2, log source = /proc/kmsg started. Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Initializing cgroup subsys cpuset Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Initializing cgroup subsys cpu Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Linux version 2.6.31-1-orion5x (Debian 2.6.31-2) (b...@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 Wed Nov 18 21:01:53 UTC 2009 Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177 Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] CPU: VIVT data cache, VIVT instruction cache Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Machine: D-Link DNS-323 Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Clearing invalid memory bank 0...@0xffffffff Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Clearing invalid memory bank 0...@0xffffffff Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Clearing invalid memory bank 0...@0xffffffff Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Ignoring unrecognised tag 0x00000000 Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Ignoring unrecognised tag 0x00000000 Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Ignoring unrecognised tag 0x00000000 Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Ignoring unrecognised tag 0x41000403 Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writeback Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] On node 0 totalpages: 16384 Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0307c20, node_mem_map c0347000 Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Normal zone: 128 pages used for memmap Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Normal zone: 0 pages reserved Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Normal zone: 16256 pages, LIFO batch:3 Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes) Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Memory: 64MB = 64MB total Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] Memory: 58944KB available (2744K code, 390K data, 112K init, 0K highmem) Dec 19 16:04:49 dlinkNas kernel: [ 0.000000] NR_IRQS:64 Dec 19 16:04:49 dlinkNas kernel: [ 0.000271] Console: colour dummy device 80x30 Dec 19 16:04:49 dlinkNas kernel: [ 0.000335] Calibrating delay loop... 332.59 BogoMIPS (lpj=1662976) Dec 19 16:04:49 dlinkNas kernel: [ 0.220277] Security Framework initialized Dec 19 16:04:49 dlinkNas kernel: [ 0.220419] Mount-cache hash table entries: 512 Dec 19 16:04:49 dlinkNas kernel: [ 0.221056] Initializing cgroup subsys ns Dec 19 16:04:49 dlinkNas kernel: [ 0.221084] Initializing cgroup subsys cpuacct Dec 19 16:04:49 dlinkNas kernel: [ 0.221106] Initializing cgroup subsys devices Dec 19 16:04:49 dlinkNas kernel: [ 0.221128] Initializing cgroup subsys freezer Dec 19 16:04:49 dlinkNas kernel: [ 0.221148] Initializing cgroup subsys net_cls Dec 19 16:04:49 dlinkNas kernel: [ 0.221239] CPU: Testing write buffer coherency: ok Dec 19 16:04:49 dlinkNas kernel: [ 0.225403] regulator: core version 0.5 Dec 19 16:04:49 dlinkNas kernel: [ 0.225814] NET: Registered protocol family 16 Dec 19 16:04:49 dlinkNas kernel: [ 0.226856] Orion ID: MV88F5182-A2. TCLK=166666667. Dec 19 16:04:49 dlinkNas kernel: [ 0.227563] DNS323: Found ethernet MAC address: 00:1e:58:a2:40:48. Dec 19 16:04:49 dlinkNas kernel: [ 0.231603] bio: create slab <bio-0> at 0 Dec 19 16:04:49 dlinkNas kernel: [ 0.234758] NET: Registered protocol family 2 Dec 19 16:04:49 dlinkNas kernel: [ 0.235395] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) Dec 19 16:04:49 dlinkNas kernel: [ 0.237454] TCP established hash table entries: 2048 (order: 2, 16384 bytes) Dec 19 16:04:49 dlinkNas kernel: [ 0.237565] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) Dec 19 16:04:49 dlinkNas kernel: [ 0.237629] TCP: Hash tables configured (established 2048 bind 2048) Dec 19 16:04:49 dlinkNas kernel: [ 0.237651] TCP reno registered Dec 19 16:04:49 dlinkNas kernel: [ 0.238159] NET: Registered protocol family 1 Dec 19 16:04:49 dlinkNas kernel: [ 0.238599] Unpacking initramfs... Dec 19 16:04:49 dlinkNas kernel: [ 0.240112] Switched to high resolution mode on CPU 0 Dec 19 16:04:49 dlinkNas kernel: [ 0.671884] Freeing initrd memory: 2612K Dec 19 16:04:49 dlinkNas kernel: [ 0.672145] NetWinder Floating Point Emulator V0.97 (double precision) Dec 19 16:04:49 dlinkNas kernel: [ 0.672830] audit: initializing netlink socket (disabled) Dec 19 16:04:49 dlinkNas kernel: [ 0.672913] type=2000 audit(0.670:1): initialized Dec 19 16:04:49 dlinkNas kernel: [ 0.674573] VFS: Disk quotas dquot_6.5.2 Dec 19 16:04:49 dlinkNas kernel: [ 0.674852] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Dec 19 16:04:49 dlinkNas kernel: [ 0.675089] msgmni has been set to 120 Dec 19 16:04:49 dlinkNas kernel: [ 0.676312] alg: No test for stdrng (krng) Dec 19 16:04:49 dlinkNas kernel: [ 0.676584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Dec 19 16:04:49 dlinkNas kernel: [ 0.676616] io scheduler noop registered Dec 19 16:04:49 dlinkNas kernel: [ 0.676633] io scheduler anticipatory registered Dec 19 16:04:49 dlinkNas kernel: [ 0.676652] io scheduler deadline registered Dec 19 16:04:49 dlinkNas kernel: [ 0.676757] io scheduler cfq registered (default) Dec 19 16:04:49 dlinkNas kernel: [ 0.687374] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled Dec 19 16:04:49 dlinkNas kernel: [ 0.688260] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A Dec 19 16:04:49 dlinkNas kernel: [ 0.688308] console [ttyS0] enabled Dec 19 16:04:49 dlinkNas kernel: [ 1.006011] physmap platform flash device: 00800000 at f4000000 Dec 19 16:04:49 dlinkNas kernel: [ 1.012241] physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank Dec 19 16:04:49 dlinkNas kernel: [ 1.018689] Amd/Fujitsu Extended Query Table at 0x0040 Dec 19 16:04:49 dlinkNas kernel: [ 1.024060] number of CFI chips: 1 Dec 19 16:04:49 dlinkNas kernel: [ 1.027456] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Dec 19 16:04:49 dlinkNas kernel: [ 1.070775] RedBoot partition parsing not available Dec 19 16:04:49 dlinkNas kernel: [ 1.075650] Using physmap partition information Dec 19 16:04:49 dlinkNas kernel: [ 1.080230] Creating 5 MTD partitions on "physmap-flash.0": Dec 19 16:04:49 dlinkNas kernel: [ 1.085805] 0x000000000000-0x000000010000 : "MTD1" Dec 19 16:04:49 dlinkNas kernel: [ 1.091253] ftl_cs: FTL header not found. Dec 19 16:04:49 dlinkNas kernel: [ 1.095891] 0x000000010000-0x000000020000 : "MTD2" Dec 19 16:04:49 dlinkNas kernel: [ 1.101143] ftl_cs: FTL header not found. Dec 19 16:04:49 dlinkNas kernel: [ 1.105607] 0x000000020000-0x0000001a0000 : "Linux Kernel" Dec 19 16:04:49 dlinkNas kernel: [ 1.111919] ftl_cs: FTL header not found. Dec 19 16:04:49 dlinkNas kernel: [ 1.116398] 0x0000001a0000-0x0000007d0000 : "File System" Dec 19 16:04:49 dlinkNas kernel: [ 1.122652] ftl_cs: FTL header not found. Dec 19 16:04:49 dlinkNas kernel: [ 1.127163] 0x0000007d0000-0x000000800000 : "u-boot" Dec 19 16:04:49 dlinkNas kernel: [ 1.132676] ftl_cs: FTL header not found. Dec 19 16:04:49 dlinkNas kernel: [ 1.137687] mice: PS/2 mouse device common for all mice Dec 19 16:04:49 dlinkNas kernel: [ 1.143825] i2c /dev entries driver Dec 19 16:04:49 dlinkNas kernel: [ 1.148138] rtc-m41t80 0-0068: chip found, driver version 0.05 Dec 19 16:04:49 dlinkNas kernel: [ 1.154308] rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0 Dec 19 16:04:49 dlinkNas kernel: [ 1.161862] Registered led device: power:blue Dec 19 16:04:49 dlinkNas kernel: [ 1.166365] Registered led device: right:amber Dec 19 16:04:49 dlinkNas kernel: [ 1.170993] Registered led device: left:amber Dec 19 16:04:49 dlinkNas kernel: [ 1.178365] TCP cubic registered Dec 19 16:04:49 dlinkNas kernel: [ 1.181657] NET: Registered protocol family 17 Dec 19 16:04:49 dlinkNas kernel: [ 1.186126] VFP support v0.3: not present Dec 19 16:04:49 dlinkNas kernel: [ 1.190750] registered taskstats version 1 Dec 19 16:04:49 dlinkNas kernel: [ 1.195933] rtc-m41t80 0-0068: setting system clock to 2009-12-19 15:04:17 UTC (1261235057) Dec 19 16:04:49 dlinkNas kernel: [ 1.204421] Freeing init memory: 112K Dec 19 16:04:49 dlinkNas kernel: [ 1.739973] SCSI subsystem initialized Dec 19 16:04:49 dlinkNas kernel: [ 1.964479] libata version 3.00 loaded. Dec 19 16:04:49 dlinkNas kernel: [ 2.014699] sata_mv sata_mv.0: version 1.28 Dec 19 16:04:49 dlinkNas kernel: [ 2.019885] sata_mv sata_mv.0: slots 32 ports 2 Dec 19 16:04:49 dlinkNas kernel: [ 2.026159] scsi0 : sata_mv Dec 19 16:04:49 dlinkNas kernel: [ 2.029614] scsi1 : sata_mv Dec 19 16:04:49 dlinkNas kernel: [ 2.032825] ata1: SATA max UDMA/133 irq 29 Dec 19 16:04:49 dlinkNas kernel: [ 2.036923] ata2: SATA max UDMA/133 irq 29 Dec 19 16:04:49 dlinkNas kernel: [ 7.590109] ata1: link is slow to respond, please be patient (ready=0) Dec 19 16:04:49 dlinkNas kernel: [ 9.990130] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 19 16:04:49 dlinkNas kernel: [ 10.010438] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7 Dec 19 16:04:49 dlinkNas kernel: [ 10.016442] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) Dec 19 16:04:49 dlinkNas kernel: [ 10.040731] ata1.00: configured for UDMA/133 Dec 19 16:04:49 dlinkNas kernel: [ 10.045713] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 Dec 19 16:04:49 dlinkNas kernel: [ 15.600110] ata2: link is slow to respond, please be patient (ready=0) Dec 19 16:04:49 dlinkNas kernel: [ 18.180135] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 19 16:04:49 dlinkNas kernel: [ 18.200444] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7 Dec 19 16:04:49 dlinkNas kernel: [ 18.206444] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) Dec 19 16:04:49 dlinkNas kernel: [ 18.230563] ata2.00: configured for UDMA/133 Dec 19 16:04:49 dlinkNas kernel: [ 18.235521] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 Dec 19 16:04:49 dlinkNas kernel: [ 18.778627] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) Dec 19 16:04:49 dlinkNas kernel: [ 18.786675] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) Dec 19 16:04:49 dlinkNas kernel: [ 18.795009] sd 1:0:0:0: [sdb] Write Protect is off Dec 19 16:04:49 dlinkNas kernel: [ 18.799805] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Dec 19 16:04:49 dlinkNas kernel: [ 18.800619] sd 0:0:0:0: [sda] Write Protect is off Dec 19 16:04:49 dlinkNas kernel: [ 18.805412] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Dec 19 16:04:49 dlinkNas kernel: [ 18.805806] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Dec 19 16:04:49 dlinkNas kernel: [ 18.816623] sda: Dec 19 16:04:49 dlinkNas kernel: [ 18.819666] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Dec 19 16:04:49 dlinkNas kernel: [ 18.830823] sdb: sda1 sda2 sda3 < sdb1 sdb2 sdb3 < sda5 sdb5 sda6 > Dec 19 16:04:49 dlinkNas kernel: [ 18.853404] sd 0:0:0:0: [sda] Attached SCSI disk Dec 19 16:04:49 dlinkNas kernel: [ 18.858064] sdb6 > Dec 19 16:04:49 dlinkNas kernel: [ 18.863392] sd 1:0:0:0: [sdb] Attached SCSI disk Dec 19 16:04:49 dlinkNas kernel: [ 19.677636] md: raid1 personality registered for level 1 Dec 19 16:04:49 dlinkNas kernel: [ 19.791536] md: md0 stopped. Dec 19 16:04:49 dlinkNas kernel: [ 19.862537] md: bind<sdb1> Dec 19 16:04:49 dlinkNas kernel: [ 19.866327] md: bind<sda1> Dec 19 16:04:49 dlinkNas kernel: [ 19.881272] raid1: raid set md0 active with 2 out of 2 mirrors Dec 19 16:04:49 dlinkNas kernel: [ 19.887335] md0: detected capacity change from 0 to 254869504 Dec 19 16:04:49 dlinkNas kernel: [ 19.903505] md0: unknown partition table Dec 19 16:04:49 dlinkNas kernel: [ 20.023794] md: md1 stopped. Dec 19 16:04:49 dlinkNas kernel: [ 20.092187] md: bind<sdb2> Dec 19 16:04:49 dlinkNas kernel: [ 20.095481] md: bind<sda2> Dec 19 16:04:49 dlinkNas kernel: [ 20.110254] raid1: raid set md1 active with 2 out of 2 mirrors Dec 19 16:04:49 dlinkNas kernel: [ 20.116318] md1: detected capacity change from 0 to 20003815424 Dec 19 16:04:49 dlinkNas kernel: [ 20.132587] md1: unknown partition table Dec 19 16:04:49 dlinkNas kernel: [ 20.250873] md: md2 stopped. Dec 19 16:04:49 dlinkNas kernel: [ 20.295602] md: bind<sdb6> Dec 19 16:04:49 dlinkNas kernel: [ 20.302304] md: bind<sda6> Dec 19 16:04:49 dlinkNas kernel: [ 20.317076] raid1: raid set md2 active with 2 out of 2 mirrors Dec 19 16:04:49 dlinkNas kernel: [ 20.323221] md2: detected capacity change from 0 to 478842781696 Dec 19 16:04:49 dlinkNas kernel: [ 20.339253] md2: unknown partition table Dec 19 16:04:49 dlinkNas kernel: [ 20.750717] kjournald starting. Commit interval 5 seconds Dec 19 16:04:49 dlinkNas kernel: [ 20.756255] EXT3-fs: mounted filesystem with ordered data mode. Dec 19 16:04:49 dlinkNas kernel: [ 22.205082] udev: starting version 149 Dec 19 16:04:49 dlinkNas kernel: [ 22.571570] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Dec 19 16:04:49 dlinkNas kernel: [ 22.822461] MV-643xx 10/100/1000 ethernet driver version 1.4 Dec 19 16:04:49 dlinkNas kernel: [ 22.828271] mv643xx_eth smi: probed Dec 19 16:04:49 dlinkNas kernel: [ 22.925979] lm75 0-0048: hwmon1: sensor 'lm75' Dec 19 16:04:49 dlinkNas kernel: [ 23.171527] usbcore: registered new interface driver usbfs Dec 19 16:04:49 dlinkNas kernel: [ 23.177193] usbcore: registered new interface driver hub Dec 19 16:04:49 dlinkNas kernel: [ 23.401064] net eth0: port 0 with MAC address 00:1e:58:a2:40:48 Dec 19 16:04:49 dlinkNas kernel: [ 24.151199] usbcore: registered new device driver usb Dec 19 16:04:49 dlinkNas kernel: [ 24.251678] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Dec 19 16:04:49 dlinkNas kernel: [ 24.258304] orion-ehci orion-ehci.0: Marvell Orion EHCI Dec 19 16:04:49 dlinkNas kernel: [ 24.263729] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 Dec 19 16:04:49 dlinkNas kernel: [ 24.314271] orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000 Dec 19 16:04:49 dlinkNas kernel: [ 24.340444] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 Dec 19 16:04:49 dlinkNas kernel: [ 24.346486] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Dec 19 16:04:49 dlinkNas kernel: [ 24.353520] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Dec 19 16:04:49 dlinkNas kernel: [ 24.360778] usb usb1: Product: Marvell Orion EHCI Dec 19 16:04:49 dlinkNas kernel: [ 24.365475] usb usb1: Manufacturer: Linux 2.6.31-1-orion5x ehci_hcd Dec 19 16:04:49 dlinkNas kernel: [ 24.371763] usb usb1: SerialNumber: orion-ehci.0 Dec 19 16:04:49 dlinkNas kernel: [ 24.376947] usb usb1: configuration #1 chosen from 1 choice Dec 19 16:04:49 dlinkNas kernel: [ 24.382888] hub 1-0:1.0: USB hub found Dec 19 16:04:49 dlinkNas kernel: [ 24.386705] hub 1-0:1.0: 1 port detected Dec 19 16:04:49 dlinkNas kernel: [ 25.458482] Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k Dec 19 16:04:49 dlinkNas kernel: [ 25.475568] Adding 979924k swap on /dev/sdb5. Priority:-2 extents:1 across:979924k Dec 19 16:04:49 dlinkNas kernel: [ 25.810788] EXT3 FS on md1, internal journal Dec 19 16:04:49 dlinkNas kernel: [ 26.104792] loop: module loaded Dec 19 16:04:49 dlinkNas kernel: [ 28.508856] kjournald starting. Commit interval 5 seconds Dec 19 16:04:49 dlinkNas kernel: [ 28.550685] EXT3 FS on md0, internal journal Dec 19 16:04:49 dlinkNas kernel: [ 28.554976] EXT3-fs: mounted filesystem with ordered data mode. Dec 19 16:04:49 dlinkNas kernel: [ 28.635650] kjournald starting. Commit interval 5 seconds Dec 19 16:04:49 dlinkNas kernel: [ 28.680813] EXT3 FS on md2, internal journal Dec 19 16:04:49 dlinkNas kernel: [ 28.685113] EXT3-fs: mounted filesystem with ordered data mode. Dec 19 16:04:49 dlinkNas kernel: [ 30.683349] RPC: Registered udp transport module. Dec 19 16:04:49 dlinkNas kernel: [ 30.688051] RPC: Registered tcp transport module. Dec 19 16:04:49 dlinkNas kernel: [ 30.855067] Slow work thread pool: Starting up Dec 19 16:04:49 dlinkNas kernel: [ 30.861307] Slow work thread pool: Ready Dec 19 16:04:49 dlinkNas kernel: [ 30.865385] FS-Cache: Loaded Dec 19 16:04:49 dlinkNas kernel: [ 31.134307] FS-Cache: Netfs 'nfs' registered for caching Dec 19 16:04:49 dlinkNas kernel: [ 31.354125] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). Dec 19 16:04:49 dlinkNas kernel: [ 31.691736] eth0: link up, 100 Mb/s, full duplex, flow control disabled Dec 19 16:04:51 dlinkNas kernel: [ 35.120519] NET: Registered protocol family 10 Dec 19 16:04:51 dlinkNas kernel: [ 35.128839] lo: Disabled Privacy Extensions Dec 19 16:04:55 dlinkNas kernel: [ 39.168335] NET: Registered protocol family 5 Dec 19 16:05:01 dlinkNas kernel: [ 45.570109] eth0: no IPv6 routers present Dec 19 16:05:51 dlinkNas kernel: [ 95.116293] svc: failed to register lockdv1 RPC service (errno 97). Dec 19 16:05:51 dlinkNas kernel: [ 95.137789] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory Dec 19 16:05:51 dlinkNas kernel: [ 95.160709] NFSD: starting 90-second grace period Dec 19 16:19:42 dlinkNas kernel: [ 925.826460] nfsd: last server has exited, flushing export cache Dec 19 16:19:44 dlinkNas kernel: [ 927.709941] svc: failed to register lockdv1 RPC service (errno 97). Dec 19 16:19:44 dlinkNas kernel: [ 927.751528] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory Dec 19 16:19:44 dlinkNas kernel: [ 927.770334] NFSD: starting 90-second grace period Dec 19 16:24:00 dlinkNas kernel: [ 1183.941783] nfsd: last server has exited, flushing export cache Dec 19 16:24:03 dlinkNas kernel: [ 1186.993221] md: md2 still in use. Dec 19 16:24:03 dlinkNas kernel: [ 1186.997219] md: md1 still in use. Dec 19 16:24:03 dlinkNas kernel: [ 1187.003099] md: md0 still in use. Dec 19 16:24:03 dlinkNas kernel: [ 1187.007997] md: md2 still in use. Dec 19 16:24:03 dlinkNas kernel: [ 1187.014373] md: md1 still in use. Dec 19 16:24:03 dlinkNas kernel: [ 1187.018765] md: md0 still in use. Dec 19 16:24:04 dlinkNas kernel: Kernel logging (proc) stopped. Dec 19 16:24:36 dlinkNas kernel: imklog 4.4.2, log source = /proc/kmsg started. Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Initializing cgroup subsys cpuset Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Initializing cgroup subsys cpu Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Linux version 2.6.31-1-orion5x (Debian 2.6.31-2) (b...@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 Wed Nov 18 21:01:53 UTC 2009 Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177 Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] CPU: VIVT data cache, VIVT instruction cache Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Machine: D-Link DNS-323 Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Clearing invalid memory bank 0...@0xffffffff Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Clearing invalid memory bank 0...@0xffffffff Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Clearing invalid memory bank 0...@0xffffffff Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Ignoring unrecognised tag 0x00000000 Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Ignoring unrecognised tag 0x00000000 Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Ignoring unrecognised tag 0x00000000 Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Ignoring unrecognised tag 0x41000403 Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writeback Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] On node 0 totalpages: 16384 Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0307c20, node_mem_map c0347000 Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Normal zone: 128 pages used for memmap Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Normal zone: 0 pages reserved Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Normal zone: 16256 pages, LIFO batch:3 Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes) Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Memory: 64MB = 64MB total Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] Memory: 58944KB available (2744K code, 390K data, 112K init, 0K highmem) Dec 19 16:24:36 dlinkNas kernel: [ 0.000000] NR_IRQS:64 Dec 19 16:24:36 dlinkNas kernel: [ 0.000271] Console: colour dummy device 80x30 Dec 19 16:24:36 dlinkNas kernel: [ 0.000335] Calibrating delay loop... 332.59 BogoMIPS (lpj=1662976) Dec 19 16:24:36 dlinkNas kernel: [ 0.220277] Security Framework initialized Dec 19 16:24:36 dlinkNas kernel: [ 0.220419] Mount-cache hash table entries: 512 Dec 19 16:24:36 dlinkNas kernel: [ 0.221056] Initializing cgroup subsys ns Dec 19 16:24:36 dlinkNas kernel: [ 0.221085] Initializing cgroup subsys cpuacct Dec 19 16:24:36 dlinkNas kernel: [ 0.221107] Initializing cgroup subsys devices Dec 19 16:24:36 dlinkNas kernel: [ 0.221128] Initializing cgroup subsys freezer Dec 19 16:24:36 dlinkNas kernel: [ 0.221149] Initializing cgroup subsys net_cls Dec 19 16:24:36 dlinkNas kernel: [ 0.221240] CPU: Testing write buffer coherency: ok Dec 19 16:24:36 dlinkNas kernel: [ 0.225402] regulator: core version 0.5 Dec 19 16:24:36 dlinkNas kernel: [ 0.225813] NET: Registered protocol family 16 Dec 19 16:24:36 dlinkNas kernel: [ 0.226855] Orion ID: MV88F5182-A2. TCLK=166666667. Dec 19 16:24:36 dlinkNas kernel: [ 0.227562] DNS323: Found ethernet MAC address: 00:1e:58:a2:40:48. Dec 19 16:24:36 dlinkNas kernel: [ 0.231603] bio: create slab <bio-0> at 0 Dec 19 16:24:36 dlinkNas kernel: [ 0.234757] NET: Registered protocol family 2 Dec 19 16:24:36 dlinkNas kernel: [ 0.235394] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) Dec 19 16:24:36 dlinkNas kernel: [ 0.237453] TCP established hash table entries: 2048 (order: 2, 16384 bytes) Dec 19 16:24:36 dlinkNas kernel: [ 0.237564] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) Dec 19 16:24:36 dlinkNas kernel: [ 0.237628] TCP: Hash tables configured (established 2048 bind 2048) Dec 19 16:24:36 dlinkNas kernel: [ 0.237650] TCP reno registered Dec 19 16:24:36 dlinkNas kernel: [ 0.238159] NET: Registered protocol family 1 Dec 19 16:24:36 dlinkNas kernel: [ 0.238599] Unpacking initramfs... Dec 19 16:24:36 dlinkNas kernel: [ 0.240112] Switched to high resolution mode on CPU 0 Dec 19 16:24:36 dlinkNas kernel: [ 0.671886] Freeing initrd memory: 2612K Dec 19 16:24:36 dlinkNas kernel: [ 0.672147] NetWinder Floating Point Emulator V0.97 (double precision) Dec 19 16:24:36 dlinkNas kernel: [ 0.672831] audit: initializing netlink socket (disabled) Dec 19 16:24:36 dlinkNas kernel: [ 0.672914] type=2000 audit(0.670:1): initialized Dec 19 16:24:36 dlinkNas kernel: [ 0.674576] VFS: Disk quotas dquot_6.5.2 Dec 19 16:24:36 dlinkNas kernel: [ 0.674855] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Dec 19 16:24:36 dlinkNas kernel: [ 0.675092] msgmni has been set to 120 Dec 19 16:24:36 dlinkNas kernel: [ 0.676315] alg: No test for stdrng (krng) Dec 19 16:24:36 dlinkNas kernel: [ 0.676586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Dec 19 16:24:36 dlinkNas kernel: [ 0.676618] io scheduler noop registered Dec 19 16:24:36 dlinkNas kernel: [ 0.676636] io scheduler anticipatory registered Dec 19 16:24:36 dlinkNas kernel: [ 0.676655] io scheduler deadline registered Dec 19 16:24:36 dlinkNas kernel: [ 0.676760] io scheduler cfq registered (default) Dec 19 16:24:36 dlinkNas kernel: [ 0.687375] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled Dec 19 16:24:36 dlinkNas kernel: [ 0.688262] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A Dec 19 16:24:36 dlinkNas kernel: [ 0.688310] console [ttyS0] enabled Dec 19 16:24:36 dlinkNas kernel: [ 1.006021] physmap platform flash device: 00800000 at f4000000 Dec 19 16:24:36 dlinkNas kernel: [ 1.012250] physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank Dec 19 16:24:36 dlinkNas kernel: [ 1.018700] Amd/Fujitsu Extended Query Table at 0x0040 Dec 19 16:24:36 dlinkNas kernel: [ 1.024069] number of CFI chips: 1 Dec 19 16:24:36 dlinkNas kernel: [ 1.027466] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Dec 19 16:24:36 dlinkNas kernel: [ 1.070776] RedBoot partition parsing not available Dec 19 16:24:36 dlinkNas kernel: [ 1.075650] Using physmap partition information Dec 19 16:24:36 dlinkNas kernel: [ 1.080230] Creating 5 MTD partitions on "physmap-flash.0": Dec 19 16:24:36 dlinkNas kernel: [ 1.085805] 0x000000000000-0x000000010000 : "MTD1" Dec 19 16:24:36 dlinkNas kernel: [ 1.091252] ftl_cs: FTL header not found. Dec 19 16:24:36 dlinkNas kernel: [ 1.095892] 0x000000010000-0x000000020000 : "MTD2" Dec 19 16:24:36 dlinkNas kernel: [ 1.101143] ftl_cs: FTL header not found. Dec 19 16:24:36 dlinkNas kernel: [ 1.105607] 0x000000020000-0x0000001a0000 : "Linux Kernel" Dec 19 16:24:36 dlinkNas kernel: [ 1.111921] ftl_cs: FTL header not found. Dec 19 16:24:36 dlinkNas kernel: [ 1.116407] 0x0000001a0000-0x0000007d0000 : "File System" Dec 19 16:24:36 dlinkNas kernel: [ 1.122662] ftl_cs: FTL header not found. Dec 19 16:24:36 dlinkNas kernel: [ 1.127173] 0x0000007d0000-0x000000800000 : "u-boot" Dec 19 16:24:36 dlinkNas kernel: [ 1.132684] ftl_cs: FTL header not found. Dec 19 16:24:36 dlinkNas kernel: [ 1.137696] mice: PS/2 mouse device common for all mice Dec 19 16:24:36 dlinkNas kernel: [ 1.143833] i2c /dev entries driver Dec 19 16:24:36 dlinkNas kernel: [ 1.148147] rtc-m41t80 0-0068: chip found, driver version 0.05 Dec 19 16:24:36 dlinkNas kernel: [ 1.154318] rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0 Dec 19 16:24:36 dlinkNas kernel: [ 1.161873] Registered led device: power:blue Dec 19 16:24:36 dlinkNas kernel: [ 1.166376] Registered led device: right:amber Dec 19 16:24:36 dlinkNas kernel: [ 1.171002] Registered led device: left:amber Dec 19 16:24:36 dlinkNas kernel: [ 1.178374] TCP cubic registered Dec 19 16:24:36 dlinkNas kernel: [ 1.181665] NET: Registered protocol family 17 Dec 19 16:24:36 dlinkNas kernel: [ 1.186136] VFP support v0.3: not present Dec 19 16:24:36 dlinkNas kernel: [ 1.190759] registered taskstats version 1 Dec 19 16:24:36 dlinkNas kernel: [ 1.195942] rtc-m41t80 0-0068: setting system clock to 2009-12-19 15:24:19 UTC (1261236259) Dec 19 16:24:36 dlinkNas kernel: [ 1.204429] Freeing init memory: 112K Dec 19 16:24:36 dlinkNas kernel: [ 1.739288] SCSI subsystem initialized Dec 19 16:24:36 dlinkNas kernel: [ 1.962382] libata version 3.00 loaded. Dec 19 16:24:36 dlinkNas kernel: [ 2.015842] sata_mv sata_mv.0: version 1.28 Dec 19 16:24:36 dlinkNas kernel: [ 2.021104] sata_mv sata_mv.0: slots 32 ports 2 Dec 19 16:24:36 dlinkNas kernel: [ 2.027239] scsi0 : sata_mv Dec 19 16:24:36 dlinkNas kernel: [ 2.030758] scsi1 : sata_mv Dec 19 16:24:36 dlinkNas kernel: [ 2.033905] ata1: SATA max UDMA/133 irq 29 Dec 19 16:24:36 dlinkNas kernel: [ 2.038004] ata2: SATA max UDMA/133 irq 29 Dec 19 16:24:36 dlinkNas kernel: [ 2.550136] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 19 16:24:36 dlinkNas kernel: [ 2.570434] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7 Dec 19 16:24:36 dlinkNas kernel: [ 2.576442] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) Dec 19 16:24:36 dlinkNas kernel: [ 2.600540] ata1.00: configured for UDMA/133 Dec 19 16:24:36 dlinkNas kernel: [ 2.605506] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 Dec 19 16:24:36 dlinkNas kernel: [ 3.120139] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 19 16:24:36 dlinkNas kernel: [ 3.140444] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7 Dec 19 16:24:36 dlinkNas kernel: [ 3.146449] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) Dec 19 16:24:36 dlinkNas kernel: [ 3.170562] ata2.00: configured for UDMA/133 Dec 19 16:24:36 dlinkNas kernel: [ 3.175508] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 Dec 19 16:24:36 dlinkNas kernel: [ 3.706928] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) Dec 19 16:24:36 dlinkNas kernel: [ 3.715212] sd 0:0:0:0: [sda] Write Protect is off Dec 19 16:24:36 dlinkNas kernel: [ 3.720007] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Dec 19 16:24:36 dlinkNas kernel: [ 3.720499] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Dec 19 16:24:36 dlinkNas kernel: [ 3.731028] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) Dec 19 16:24:36 dlinkNas kernel: [ 3.739213] sd 1:0:0:0: [sdb] Write Protect is off Dec 19 16:24:36 dlinkNas kernel: [ 3.744082] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Dec 19 16:24:36 dlinkNas kernel: [ 3.744465] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Dec 19 16:24:36 dlinkNas kernel: [ 3.755279] sdb: Dec 19 16:24:36 dlinkNas kernel: [ 3.758555] sda: sdb1 sdb2 sdb3 < sdb5 sda1 sda2 sda3 < sdb6 > Dec 19 16:24:36 dlinkNas kernel: [ 3.779277] sd 1:0:0:0: [sdb] Attached SCSI disk Dec 19 16:24:36 dlinkNas kernel: [ 3.784815] sda5 sda6 > Dec 19 16:24:36 dlinkNas kernel: [ 3.801274] sd 0:0:0:0: [sda] Attached SCSI disk Dec 19 16:24:36 dlinkNas kernel: [ 4.648337] md: raid1 personality registered for level 1 Dec 19 16:24:36 dlinkNas kernel: [ 4.782331] md: md0 stopped. Dec 19 16:24:36 dlinkNas kernel: [ 4.841310] md: bind<sdb1> Dec 19 16:24:36 dlinkNas kernel: [ 4.850641] md: bind<sda1> Dec 19 16:24:36 dlinkNas kernel: [ 4.865867] raid1: raid set md0 active with 2 out of 2 mirrors Dec 19 16:24:36 dlinkNas kernel: [ 4.871992] md0: detected capacity change from 0 to 254869504 Dec 19 16:24:36 dlinkNas kernel: [ 4.888384] md0: unknown partition table Dec 19 16:24:36 dlinkNas kernel: [ 5.011718] md: md1 stopped. Dec 19 16:24:36 dlinkNas kernel: [ 5.053407] md: bind<sdb2> Dec 19 16:24:36 dlinkNas kernel: [ 5.068893] md: bind<sda2> Dec 19 16:24:36 dlinkNas kernel: [ 5.084593] raid1: raid set md1 active with 2 out of 2 mirrors Dec 19 16:24:36 dlinkNas kernel: [ 5.090734] md1: detected capacity change from 0 to 20003815424 Dec 19 16:24:36 dlinkNas kernel: [ 5.107170] md1: unknown partition table Dec 19 16:24:36 dlinkNas kernel: [ 5.241943] md: md2 stopped. Dec 19 16:24:36 dlinkNas kernel: [ 5.310140] md: bind<sdb6> Dec 19 16:24:36 dlinkNas kernel: [ 5.313787] md: bind<sda6> Dec 19 16:24:36 dlinkNas kernel: [ 5.328666] raid1: raid set md2 active with 2 out of 2 mirrors Dec 19 16:24:36 dlinkNas kernel: [ 5.334780] md2: detected capacity change from 0 to 478842781696 Dec 19 16:24:36 dlinkNas kernel: [ 5.351681] md2: unknown partition table Dec 19 16:24:36 dlinkNas kernel: [ 5.781624] kjournald starting. Commit interval 5 seconds Dec 19 16:24:36 dlinkNas kernel: [ 5.787161] EXT3-fs: mounted filesystem with ordered data mode. Dec 19 16:24:36 dlinkNas kernel: [ 7.326645] udev: starting version 149 Dec 19 16:24:36 dlinkNas kernel: [ 7.677029] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Dec 19 16:24:36 dlinkNas kernel: [ 7.945079] MV-643xx 10/100/1000 ethernet driver version 1.4 Dec 19 16:24:36 dlinkNas kernel: [ 7.950956] mv643xx_eth smi: probed Dec 19 16:24:36 dlinkNas kernel: [ 8.055378] lm75 0-0048: hwmon1: sensor 'lm75' Dec 19 16:24:36 dlinkNas kernel: [ 8.284328] usbcore: registered new interface driver usbfs Dec 19 16:24:36 dlinkNas kernel: [ 8.289996] usbcore: registered new interface driver hub Dec 19 16:24:36 dlinkNas kernel: [ 8.543351] net eth0: port 0 with MAC address 00:1e:58:a2:40:48 Dec 19 16:24:36 dlinkNas kernel: [ 9.209443] usbcore: registered new device driver usb Dec 19 16:24:36 dlinkNas kernel: [ 9.442610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Dec 19 16:24:36 dlinkNas kernel: [ 9.449239] orion-ehci orion-ehci.0: Marvell Orion EHCI Dec 19 16:24:36 dlinkNas kernel: [ 9.454664] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 Dec 19 16:24:36 dlinkNas kernel: [ 9.530290] orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000 Dec 19 16:24:36 dlinkNas kernel: [ 9.550516] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 Dec 19 16:24:36 dlinkNas kernel: [ 9.556678] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Dec 19 16:24:36 dlinkNas kernel: [ 9.563603] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Dec 19 16:24:36 dlinkNas kernel: [ 9.570862] usb usb1: Product: Marvell Orion EHCI Dec 19 16:24:36 dlinkNas kernel: [ 9.575557] usb usb1: Manufacturer: Linux 2.6.31-1-orion5x ehci_hcd Dec 19 16:24:36 dlinkNas kernel: [ 9.581844] usb usb1: SerialNumber: orion-ehci.0 Dec 19 16:24:36 dlinkNas kernel: [ 9.587021] usb usb1: configuration #1 chosen from 1 choice Dec 19 16:24:36 dlinkNas kernel: [ 9.592931] hub 1-0:1.0: USB hub found Dec 19 16:24:36 dlinkNas kernel: [ 9.596753] hub 1-0:1.0: 1 port detected Dec 19 16:24:36 dlinkNas kernel: [ 10.587947] Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k Dec 19 16:24:36 dlinkNas kernel: [ 10.604467] Adding 979924k swap on /dev/sdb5. Priority:-2 extents:1 across:979924k Dec 19 16:24:36 dlinkNas kernel: [ 10.920777] EXT3 FS on md1, internal journal Dec 19 16:24:36 dlinkNas kernel: [ 11.210348] loop: module loaded Dec 19 16:24:36 dlinkNas kernel: [ 13.539716] kjournald starting. Commit interval 5 seconds Dec 19 16:24:36 dlinkNas kernel: [ 13.560665] EXT3 FS on md0, internal journal Dec 19 16:24:36 dlinkNas kernel: [ 13.564957] EXT3-fs: mounted filesystem with ordered data mode. Dec 19 16:24:36 dlinkNas kernel: [ 13.635268] kjournald starting. Commit interval 5 seconds Dec 19 16:24:36 dlinkNas kernel: [ 13.700624] EXT3 FS on md2, internal journal Dec 19 16:24:36 dlinkNas kernel: [ 13.704916] EXT3-fs: mounted filesystem with ordered data mode. Dec 19 16:24:36 dlinkNas kernel: [ 15.673798] RPC: Registered udp transport module. Dec 19 16:24:36 dlinkNas kernel: [ 15.678506] RPC: Registered tcp transport module. Dec 19 16:24:36 dlinkNas kernel: [ 15.844704] Slow work thread pool: Starting up Dec 19 16:24:36 dlinkNas kernel: [ 15.850917] Slow work thread pool: Ready Dec 19 16:24:36 dlinkNas kernel: [ 15.854990] FS-Cache: Loaded Dec 19 16:24:36 dlinkNas kernel: [ 16.082517] FS-Cache: Netfs 'nfs' registered for caching Dec 19 16:24:36 dlinkNas kernel: [ 16.290688] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). Dec 19 16:24:36 dlinkNas kernel: [ 16.822475] eth0: link up, 100 Mb/s, full duplex, flow control disabled Dec 19 16:24:38 dlinkNas kernel: [ 20.014473] NET: Registered protocol family 10 Dec 19 16:24:38 dlinkNas kernel: [ 20.023132] lo: Disabled Privacy Extensions Dec 19 16:24:41 dlinkNas kernel: [ 23.420945] NET: Registered protocol family 5 Dec 19 16:24:49 dlinkNas kernel: [ 30.790094] eth0: no IPv6 routers present Dec 19 16:25:38 dlinkNas kernel: [ 80.437476] svc: failed to register lockdv1 RPC service (errno 97). Dec 19 16:25:38 dlinkNas kernel: [ 80.458850] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory Dec 19 16:25:38 dlinkNas kernel: [ 80.473278] NFSD: starting 90-second grace period Dec 19 16:32:36 dlinkNas kernel: [ 498.127725] nfsd: last server has exited, flushing export cache Dec 19 16:32:39 dlinkNas kernel: [ 500.965616] md: md2 still in use. Dec 19 16:32:39 dlinkNas kernel: [ 500.969604] md: md1 still in use. Dec 19 16:32:39 dlinkNas kernel: [ 500.975665] md: md0 still in use. Dec 19 16:32:39 dlinkNas kernel: [ 500.982828] md: md2 still in use. Dec 19 16:32:39 dlinkNas kernel: [ 501.006145] md: md1 still in use. Dec 19 16:32:39 dlinkNas kernel: [ 501.013337] md: md0 still in use. Dec 19 16:32:40 dlinkNas kernel: Kernel logging (proc) stopped. Dec 19 16:34:06 dlinkNas kernel: imklog 4.4.2, log source = /proc/kmsg started. Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Initializing cgroup subsys cpuset Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Initializing cgroup subsys cpu Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Linux version 2.6.32-trunk-orion5x (Debian 2.6.32-1) (wa...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 Thu Dec 10 21:11:05 UTC 2009 Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177 Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] CPU: VIVT data cache, VIVT instruction cache Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Machine: D-Link DNS-323 Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Clearing invalid memory bank 0...@0xffffffff Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Clearing invalid memory bank 0...@0xffffffff Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Clearing invalid memory bank 0...@0xffffffff Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Ignoring unrecognised tag 0x00000000 Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Ignoring unrecognised tag 0x00000000 Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Ignoring unrecognised tag 0x00000000 Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Ignoring unrecognised tag 0x41000403 Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writeback Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] On node 0 totalpages: 16384 Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0374414, node_mem_map c03dc000 Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Normal zone: 128 pages used for memmap Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Normal zone: 0 pages reserved Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Normal zone: 16256 pages, LIFO batch:3 Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Memory: 64MB = 64MB total Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Memory: 58328KB available (3156K code, 562K data, 116K init, 0K highmem) Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Hierarchical RCU implementation. Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] NR_IRQS:64 Dec 19 16:34:06 dlinkNas kernel: [ 0.000000] Console: colour dummy device 80x30 Dec 19 16:34:06 dlinkNas kernel: [ 0.000240] Calibrating delay loop... 332.59 BogoMIPS (lpj=1662976) Dec 19 16:34:06 dlinkNas kernel: [ 0.220157] Security Framework initialized Dec 19 16:34:06 dlinkNas kernel: [ 0.220200] SELinux: Disabled at boot. Dec 19 16:34:06 dlinkNas kernel: [ 0.220253] Mount-cache hash table entries: 512 Dec 19 16:34:06 dlinkNas kernel: [ 0.220852] Initializing cgroup subsys ns Dec 19 16:34:06 dlinkNas kernel: [ 0.220884] Initializing cgroup subsys cpuacct Dec 19 16:34:06 dlinkNas kernel: [ 0.220909] Initializing cgroup subsys devices Dec 19 16:34:06 dlinkNas kernel: [ 0.220933] Initializing cgroup subsys freezer Dec 19 16:34:06 dlinkNas kernel: [ 0.220957] Initializing cgroup subsys net_cls Dec 19 16:34:06 dlinkNas kernel: [ 0.221046] CPU: Testing write buffer coherency: ok Dec 19 16:34:06 dlinkNas kernel: [ 0.225570] regulator: core version 0.5 Dec 19 16:34:06 dlinkNas kernel: [ 0.225974] NET: Registered protocol family 16 Dec 19 16:34:06 dlinkNas kernel: [ 0.227097] Orion ID: MV88F5182-A2. TCLK=166666667. Dec 19 16:34:06 dlinkNas kernel: [ 0.227876] DNS323: Found ethernet MAC address: 00:1e:58:a2:40:48. Dec 19 16:34:06 dlinkNas kernel: [ 0.232526] bio: create slab <bio-0> at 0 Dec 19 16:34:06 dlinkNas kernel: [ 0.233231] vgaarb: loaded Dec 19 16:34:06 dlinkNas kernel: [ 0.234507] Switching to clocksource orion_clocksource Dec 19 16:34:06 dlinkNas kernel: [ 0.245450] NET: Registered protocol family 2 Dec 19 16:34:06 dlinkNas kernel: [ 0.246015] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) Dec 19 16:34:06 dlinkNas kernel: [ 0.247800] TCP established hash table entries: 2048 (order: 2, 16384 bytes) Dec 19 16:34:06 dlinkNas kernel: [ 0.247914] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) Dec 19 16:34:06 dlinkNas kernel: [ 0.247981] TCP: Hash tables configured (established 2048 bind 2048) Dec 19 16:34:06 dlinkNas kernel: [ 0.248007] TCP reno registered Dec 19 16:34:06 dlinkNas kernel: [ 0.248441] NET: Registered protocol family 1 Dec 19 16:34:06 dlinkNas kernel: [ 0.248901] Unpacking initramfs... Dec 19 16:34:06 dlinkNas kernel: [ 0.687470] Freeing initrd memory: 2624K Dec 19 16:34:06 dlinkNas kernel: [ 0.687639] NetWinder Floating Point Emulator V0.97 (double precision) Dec 19 16:34:06 dlinkNas kernel: [ 0.688347] audit: initializing netlink socket (disabled) Dec 19 16:34:06 dlinkNas kernel: [ 0.688426] type=2000 audit(0.680:1): initialized Dec 19 16:34:06 dlinkNas kernel: [ 0.705191] VFS: Disk quotas dquot_6.5.2 Dec 19 16:34:06 dlinkNas kernel: [ 0.705833] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Dec 19 16:34:06 dlinkNas kernel: [ 0.706139] msgmni has been set to 119 Dec 19 16:34:06 dlinkNas kernel: [ 0.707859] alg: No test for stdrng (krng) Dec 19 16:34:06 dlinkNas kernel: [ 0.708179] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Dec 19 16:34:06 dlinkNas kernel: [ 0.708214] io scheduler noop registered Dec 19 16:34:06 dlinkNas kernel: [ 0.708236] io scheduler anticipatory registered Dec 19 16:34:06 dlinkNas kernel: [ 0.708259] io scheduler deadline registered Dec 19 16:34:06 dlinkNas kernel: [ 0.708750] io scheduler cfq registered (default) Dec 19 16:34:06 dlinkNas kernel: [ 0.720876] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled Dec 19 16:34:06 dlinkNas kernel: [ 0.721765] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A Dec 19 16:34:06 dlinkNas kernel: [ 1.058512] console [ttyS0] enabled Dec 19 16:34:06 dlinkNas kernel: [ 1.062897] physmap platform flash device: 00800000 at f4000000 Dec 19 16:34:06 dlinkNas kernel: [ 1.069187] physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank Dec 19 16:34:06 dlinkNas kernel: [ 1.116310] Support for command set 0002 not present Dec 19 16:34:06 dlinkNas kernel: [ 1.121278] gen_probe: No supported Vendor Command Set found Dec 19 16:34:06 dlinkNas kernel: [ 1.195229] physmap-flash physmap-flash.0: map_probe failed Dec 19 16:34:06 dlinkNas kernel: [ 1.201768] mice: PS/2 mouse device common for all mice Dec 19 16:34:06 dlinkNas kernel: [ 1.208031] i2c /dev entries driver Dec 19 16:34:06 dlinkNas kernel: [ 1.212368] rtc-m41t80 0-0068: chip found, driver version 0.05 Dec 19 16:34:06 dlinkNas kernel: [ 1.218656] rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0 Dec 19 16:34:06 dlinkNas kernel: [ 1.226227] Registered led device: power:blue Dec 19 16:34:06 dlinkNas kernel: [ 1.230718] Registered led device: right:amber Dec 19 16:34:06 dlinkNas kernel: [ 1.235378] Registered led device: left:amber Dec 19 16:34:06 dlinkNas kernel: [ 1.242565] TCP cubic registered Dec 19 16:34:06 dlinkNas kernel: [ 1.245862] NET: Registered protocol family 17 Dec 19 16:34:06 dlinkNas kernel: [ 1.250337] VFP support v0.3: not present Dec 19 16:34:06 dlinkNas kernel: [ 1.255051] registered taskstats version 1 Dec 19 16:34:06 dlinkNas kernel: [ 1.260278] rtc-m41t80 0-0068: setting system clock to 2009-12-19 15:32:58 UTC (1261236778) Dec 19 16:34:06 dlinkNas kernel: [ 1.268792] Freeing init memory: 116K Dec 19 16:34:06 dlinkNas kernel: [ 1.830949] SCSI subsystem initialized Dec 19 16:34:06 dlinkNas kernel: [ 2.070052] libata version 3.00 loaded. Dec 19 16:34:06 dlinkNas kernel: [ 2.121226] sata_mv sata_mv.0: version 1.28 Dec 19 16:34:06 dlinkNas kernel: [ 2.126508] sata_mv sata_mv.0: slots 32 ports 2 Dec 19 16:34:06 dlinkNas kernel: [ 2.132629] scsi0 : sata_mv Dec 19 16:34:06 dlinkNas kernel: [ 2.136269] scsi1 : sata_mv Dec 19 16:34:06 dlinkNas kernel: [ 2.139457] ata1: SATA max UDMA/133 irq 29 Dec 19 16:34:06 dlinkNas kernel: [ 2.143551] ata2: SATA max UDMA/133 irq 29 Dec 19 16:34:06 dlinkNas kernel: [ 2.654645] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 19 16:34:06 dlinkNas kernel: [ 2.674959] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7 Dec 19 16:34:06 dlinkNas kernel: [ 2.680970] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) Dec 19 16:34:06 dlinkNas kernel: [ 2.705056] ata1.00: configured for UDMA/133 Dec 19 16:34:06 dlinkNas kernel: [ 2.710067] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 Dec 19 16:34:06 dlinkNas kernel: [ 3.224644] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 19 16:34:06 dlinkNas kernel: [ 3.244957] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01113, max UDMA7 Dec 19 16:34:06 dlinkNas kernel: [ 3.250968] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) Dec 19 16:34:06 dlinkNas kernel: [ 3.275062] ata2.00: configured for UDMA/133 Dec 19 16:34:06 dlinkNas kernel: [ 3.280067] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 Dec 19 16:34:06 dlinkNas kernel: [ 3.978957] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) Dec 19 16:34:06 dlinkNas kernel: [ 3.990626] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) Dec 19 16:34:06 dlinkNas kernel: [ 3.998944] sd 0:0:0:0: [sda] Write Protect is off Dec 19 16:34:06 dlinkNas kernel: [ 4.003745] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Dec 19 16:34:06 dlinkNas kernel: [ 4.004755] sd 1:0:0:0: [sdb] Write Protect is off Dec 19 16:34:06 dlinkNas kernel: [ 4.009552] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Dec 19 16:34:06 dlinkNas kernel: [ 4.009959] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Dec 19 16:34:06 dlinkNas kernel: [ 4.020645] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Dec 19 16:34:06 dlinkNas kernel: [ 4.031544] sda: Dec 19 16:34:06 dlinkNas kernel: [ 4.035307] sdb: sda1 sda2 sda3 < sdb1 sdb2 sdb3 < sda5 sdb5 sda6 > Dec 19 16:34:06 dlinkNas kernel: [ 4.063454] sdb6 > Dec 19 16:34:06 dlinkNas kernel: [ 4.084436] sd 0:0:0:0: [sda] Attached SCSI disk Dec 19 16:34:06 dlinkNas kernel: [ 4.096118] sd 1:0:0:0: [sdb] Attached SCSI disk Dec 19 16:34:06 dlinkNas kernel: [ 4.728189] md: raid1 personality registered for level 1 Dec 19 16:34:06 dlinkNas kernel: [ 4.828624] md: md0 stopped. Dec 19 16:34:06 dlinkNas kernel: [ 4.874343] md: bind<sdb1> Dec 19 16:34:06 dlinkNas kernel: [ 4.880408] md: bind<sda1> Dec 19 16:34:06 dlinkNas kernel: [ 4.915671] raid1: raid set md0 active with 2 out of 2 mirrors Dec 19 16:34:06 dlinkNas kernel: [ 4.921726] md0: detected capacity change from 0 to 254869504 Dec 19 16:34:06 dlinkNas kernel: [ 4.942538] md0: unknown partition table Dec 19 16:34:06 dlinkNas kernel: [ 5.049687] md: md1 stopped. Dec 19 16:34:06 dlinkNas kernel: [ 5.095167] md: bind<sdb2> Dec 19 16:34:06 dlinkNas kernel: [ 5.099807] md: bind<sda2> Dec 19 16:34:06 dlinkNas kernel: [ 5.133535] raid1: raid set md1 active with 2 out of 2 mirrors Dec 19 16:34:06 dlinkNas kernel: [ 5.139820] md1: detected capacity change from 0 to 20003815424 Dec 19 16:34:06 dlinkNas kernel: [ 5.162525] md1: unknown partition table Dec 19 16:34:06 dlinkNas kernel: [ 5.267350] md: md2 stopped. Dec 19 16:34:06 dlinkNas kernel: [ 5.314755] md: bind<sdb6> Dec 19 16:34:06 dlinkNas kernel: [ 5.323694] md: bind<sda6> Dec 19 16:34:06 dlinkNas kernel: [ 5.358981] raid1: raid set md2 active with 2 out of 2 mirrors Dec 19 16:34:06 dlinkNas kernel: [ 5.365257] md2: detected capacity change from 0 to 478842781696 Dec 19 16:34:06 dlinkNas kernel: [ 5.390724] md2: unknown partition table Dec 19 16:34:06 dlinkNas kernel: [ 5.814941] kjournald starting. Commit interval 5 seconds Dec 19 16:34:06 dlinkNas kernel: [ 5.820486] EXT3-fs: mounted filesystem with ordered data mode. Dec 19 16:34:06 dlinkNas kernel: [ 7.359991] udev: starting version 149 Dec 19 16:34:06 dlinkNas kernel: [ 8.158398] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Dec 19 16:34:06 dlinkNas kernel: [ 8.572890] lm75 0-0048: hwmon1: sensor 'lm75' Dec 19 16:34:06 dlinkNas kernel: [ 8.977273] MV-643xx 10/100/1000 ethernet driver version 1.4 Dec 19 16:34:06 dlinkNas kernel: [ 9.035378] mv643xx_eth smi: probed Dec 19 16:34:06 dlinkNas kernel: [ 9.092365] net eth0: port 0 with MAC address 00:1e:58:a2:40:48 Dec 19 16:34:06 dlinkNas kernel: [ 9.406295] usbcore: registered new interface driver usbfs Dec 19 16:34:06 dlinkNas kernel: [ 9.434432] usbcore: registered new interface driver hub Dec 19 16:34:06 dlinkNas kernel: [ 9.454880] usbcore: registered new device driver usb Dec 19 16:34:06 dlinkNas kernel: [ 9.527107] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Dec 19 16:34:06 dlinkNas kernel: [ 9.534353] orion-ehci orion-ehci.0: Marvell Orion EHCI Dec 19 16:34:06 dlinkNas kernel: [ 9.541700] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 Dec 19 16:34:06 dlinkNas kernel: [ 9.574781] orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000 Dec 19 16:34:06 dlinkNas kernel: [ 9.594897] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 Dec 19 16:34:06 dlinkNas kernel: [ 9.600956] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Dec 19 16:34:06 dlinkNas kernel: [ 9.607827] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Dec 19 16:34:06 dlinkNas kernel: [ 9.615096] usb usb1: Product: Marvell Orion EHCI Dec 19 16:34:06 dlinkNas kernel: [ 9.619804] usb usb1: Manufacturer: Linux 2.6.32-trunk-orion5x ehci_hcd Dec 19 16:34:06 dlinkNas kernel: [ 9.626446] usb usb1: SerialNumber: orion-ehci.0 Dec 19 16:34:06 dlinkNas kernel: [ 9.673648] usb usb1: configuration #1 chosen from 1 choice Dec 19 16:34:06 dlinkNas kernel: [ 9.681378] hub 1-0:1.0: USB hub found Dec 19 16:34:06 dlinkNas kernel: [ 9.689057] hub 1-0:1.0: 1 port detected Dec 19 16:34:06 dlinkNas kernel: [ 10.637327] Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k Dec 19 16:34:06 dlinkNas kernel: [ 10.654515] Adding 979924k swap on /dev/sdb5. Priority:-2 extents:1 across:979924k Dec 19 16:34:06 dlinkNas kernel: [ 61.304923] EXT3 FS on md1, internal journal Dec 19 16:34:06 dlinkNas kernel: [ 61.721544] loop: module loaded Dec 19 16:34:06 dlinkNas kernel: [ 64.200817] kjournald starting. Commit interval 5 seconds Dec 19 16:34:06 dlinkNas kernel: [ 64.225204] EXT3 FS on md0, internal journal Dec 19 16:34:06 dlinkNas kernel: [ 64.229504] EXT3-fs: mounted filesystem with ordered data mode. Dec 19 16:34:06 dlinkNas kernel: [ 64.302331] kjournald starting. Commit interval 5 seconds Dec 19 16:34:06 dlinkNas kernel: [ 64.345273] EXT3 FS on md2, internal journal Dec 19 16:34:06 dlinkNas kernel: [ 64.349574] EXT3-fs: mounted filesystem with ordered data mode. Dec 19 16:34:06 dlinkNas kernel: [ 66.155784] RPC: Registered udp transport module. Dec 19 16:34:06 dlinkNas kernel: [ 66.160487] RPC: Registered tcp transport module. Dec 19 16:34:06 dlinkNas kernel: [ 66.165257] RPC: Registered tcp NFSv4.1 backchannel transport module. Dec 19 16:34:06 dlinkNas kernel: [ 66.349410] Slow work thread pool: Starting up Dec 19 16:34:06 dlinkNas kernel: [ 66.354182] Slow work thread pool: Ready Dec 19 16:34:06 dlinkNas kernel: [ 66.360233] FS-Cache: Loaded Dec 19 16:34:06 dlinkNas kernel: [ 66.640924] FS-Cache: Netfs 'nfs' registered for caching Dec 19 16:34:06 dlinkNas kernel: [ 66.860912] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). Dec 19 16:34:06 dlinkNas kernel: [ 67.270615] eth0: link up, 100 Mb/s, full duplex, flow control disabled Dec 19 16:34:07 dlinkNas kernel: [ 70.531392] NET: Registered protocol family 10 Dec 19 16:34:07 dlinkNas kernel: [ 70.541386] lo: Disabled Privacy Extensions Dec 19 16:34:11 dlinkNas kernel: [ 74.479317] NET: Registered protocol family 5 Dec 19 16:34:18 dlinkNas kernel: [ 81.374621] eth0: no IPv6 routers present Dec 19 16:34:25 dlinkNas kernel: [ 87.864818] svc: failed to register lockdv1 RPC service (errno 97). Dec 19 16:34:25 dlinkNas kernel: [ 87.886573] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory Dec 19 16:34:25 dlinkNas kernel: [ 87.900998] NFSD: starting 90-second grace period Dec 19 16:47:03 dlinkNas kernel: [ 846.607563] nfsd: last server has exited, flushing export cache Dec 19 16:47:04 dlinkNas kernel: [ 847.312768] svc: failed to register lockdv1 RPC service (errno 97). Dec 19 16:47:04 dlinkNas kernel: [ 847.356910] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory Dec 19 16:47:04 dlinkNas kernel: [ 847.380308] NFSD: starting 90-second grace period Dec 20 06:25:06 dlinkNas kernel: Kernel logging (proc) stopped. Dec 20 06:25:06 dlinkNas kernel: imklog 4.4.2, log source = /proc/kmsg started. Dec 20 06:25:06 dlinkNas kernel: Kernel logging (proc) stopped.
