On 21/08/2021 04:31, David Bremner wrote:
Damien Couroussé writes:
Hi David,
On 19/08/2021 20:31, David Bremner wrote:
The error appeared in two situations:
1. emacs 27 (currently in stable/bullseye) is already installed. Install
elpa-org (from stable as well, i.e. version 9.1.14+dfsg-3
Hi David,
On 19/08/2021 20:31, David Bremner wrote:
I did another test in a schroot. Here, the error was triggered by the
upgrade of the package 'emacs' from 1:26.1+1-3.2+deb10u2 to
1:27.1+1-3.1, with the package 'elpa-org' already installed.
I believe the issue is related to this package and
On 19/08/2021 13:35, Bastien wrote:
Package: elpa-org
Version: 9.1.14+dfsg-3
Severity: important
The package install fails with the following error message:
ERROR: install script from elpa-org package failed
dpkg: error processing package elpa-org (--configure):
installed elpa-org package p
Package: elpa-org
Version: 9.1.14+dfsg-3
Severity: important
The package install fails with the following error message:
ERROR: install script from elpa-org package failed
dpkg: error processing package elpa-org (--configure):
installed elpa-org package post-installation script subprocess
retu
On 24/03/2020 23:52, Harlan Lieberman-Berg wrote:
>> I could fix the issue by upgrading python3-certbot-apache to version
>> 1.1.0-1.
> Hi Damien,
>
> Yes, these two versions are not fully compatible. I didn't put in a
> version restriction because mixing packages from testing into a stable
> ins
Package: certbot
Version: 1.1.0-1
Severity: important
Dear Maintainer,
certbot reports the following error:
┌
│ (certbot)root@yadayada:~# certbot --help
│ An unexpected error occurred:
│ AttributeError: module 'certbot.plugins.common' has no attribute
'TLSSNI01'
│ Please see the logfile '/t
Package: fontconfig-config
Version: 2.13.0-4
Followup-For: Bug #896684
I experience the same problem, with a similar setup -- albeit minor differences.
The problem appears for a lot of applications run from the terminal, e.g. gitk.
Following https://bbs.archlinux.org/viewtopic.php?id=235643, I s
Package: grive
Version: 0.2.0-1.1+b2
Severity: normal
hello,
the first synchronisation crashes as follows:
$ grive -a
---
Please go to this URL and get an authentication code:
[hidden]
---
Please input the authentication code here:
[hidden]
Reading local
Le 09/05/2015 14:43, Marc Haber a écrit :
> Please check the contents of your /etc/mailname file and fix it
> appropriately. I have made a note for the package to give a more
> meaningful error message on this case in the future.
You and Adam well spotted the problem.
I have wrongly assumed that
Package: exim4-config
Version: 4.84-8
Severity: important
hello,
The installation of exim4 fails as copied below.
Please also find attached the tmp file
/var/lib/exim4/config.autogenerated.tmp created during the installation
process.
regards,
root@puccini:~# LANG=C apt-get install exim4
Readi
In the tab "View logs", I get this:
Internal Server Error
internal liftAnnex
Damien
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: git-annex
Version: 5.20140926
Severity: important
Hello,
This issue seems related to #762466, but I am not sure.
>From a fresh install of git-annex,
when creating a new repository I get the following error:
Internal Server Error
user error (git
["--git-dir=/home/damien/docannex/.git
Package: obnam
Version: 1.8-1
Severity: minor
hello,
obnam returns an abstruse message when the configuration file is
incorrectly specified.
Here is an example :
$ /usr/bin/obnam --config $BAD_CONFIG_FILENAME generations
ERROR: RA920EX: does not seem to be an Obnam repository
best regards,
D
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Le 13/05/2014 15:37, Jörg Frings-Fürst a écrit :
> Control: tag -1 + moreinfo
>
>
> Hello,
>
> exist this error still in the current version?
hello,
Not on my side.
regards,
Damien
-BEGIN PGP SIGNATURE-
Version: GnuPG v1
Comment: Using GnuPG
hello,
I agree that when the user interrupts the backup with ctrl-c, obnam
should terminate "cleanly"; I mean, without leaving locks.
However, checkpointing takes a lot of time on slow systems and/or with
low network bandwidth (several minutes).
I would prefer just interrupting the backup and rem
Package: sd
Version: 0.75-1
Severity: normal
hello,
The package libnet-trac-perl was not installed when I installed sd.
I suggest either mark this package as recommended, I produce an explicit
error message when the user tries to clone a trac repo, or add this
package as a dependency of the sd pa
Package: alsa-base
Version: 1.0.25+2+nmu2
Followup-For: Bug #679056
Hello,
I experienced the same problem on a fresh install, with a ALC887-VD
sound system. The modification of alsa-base.conf proposed by Shawn works
for me.
Before solving the problem, /var/log/syslog was showing:
Apr 8 15:56:
Hello,
Actually, deja-dup could not launch because python2.6 was still installed
on my system and set as the default version of python.
Removing python2.6 or setting python2.7 as default (update-alternatives)
now allows to run correctly deja-dup.
Maybe it should be made explicit that deja-dup run
Package: deja-dup
Version: 20.2-2.1
Severity: important
Hello,
After an upgrade to the version currently in testing, deja-dup crashes
at startup. duplicity is installed with the required version.
$ deja-dup
Traceback (most recent call last):
File "/usr/bin/duplicity", line 40, in
from du
Package: zim
Version: 0.58-1
Severity: important
Hello,
zim crashes at startup. I suspect a missing dependency of this release
version to python-gobject-2, or to a more recent version of
python-gobject which comes with python-gobject-2. I have also found this bug in
the previous
release 0.57.
Package: evince
Version: 2.32.0-1
Severity: normal
Hello,
I do also experience this bug.
But pdfcube also has the same displaying problems for me. xpdf handles
correctly this document.
Furthermore, I have noticed that this problem happens in documents that
include "no name" fonts.
For example f
severity important
thanks
I request a change of the severity at least to important: the package is
not usable for me.
I can provide more info, but don't know exactly what you are looking
for. Please ask.
regards,
2012/7/11 Debian Bug Tracking System
> Thank you for the additional information
severity 636572 important
tag 636572 confirmed
thanks
I request a change of the severity at least to important : the package is
not usable for me.
If more info is required, please ask what kind.
regards,
Package: virtualbox
Version: 4.1.18-dfsg-1
Severity: normal
Hello,
I do also experience this bug in this version of the package.
I get the same gdb trace as manuk7 reports.
-- System Information:
Debian Release: 6.0.5
APT prefers stable
APT policy: (990, 'stable'), (500, 'stable-updates'
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello,
On 09/07/2012 15:49, Pino Toscano wrote:
> Alle lunedì 9 luglio 2012, Damien Couroussé ha scritto:
>> Package: okular Version: 4:4.4.5-2
>
> Why didn't you upgrade okular too? Also,
The buguous scenario was the following
Package: okular
Version: 4:4.4.5-2
Severity: important
Hello,
I have just installed okular on a stable/testing mixed system. At least
one symbol is not defined and makes okular crash.
BTW, I am not running KDE. Hence I guess my system has the very minimum
kde libraries installed in order to run
patch
thanks
This small patch adds an optional option [FILE] to the ls command.
It does not modify the way the ls command is already working: it should
still be possible to give None, one or several generation arguments.
ls command summary would become:
obnam [options] ls [GENERATION]... [FILE]
Package: obnam
Version: 1.0-1
Severity: minor
Tags: patch
Dear Lars,
Please find attached a patch for a small try to make the manpage about
the keeping policy more clear.
Hope it helps,
Damien
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing')
Package: obnam
Version: 1.0-1
Severity: wishlist
Dear Maintainer,
First of all, thanks for this nice tool!
Is it possible to add a [FILE] parameter to the 'ls' command, in
order to list a partial view of a generation ? For example by doing :
$ obnam ls
By example :
$ obnam ls 6008 /home/damie
Package: virtualbox
Version: 4.1.16-dfsg-1
Severity: normal
Dear Maintainer,
I admit my first bug report was lacking of information. Please apologize
for this.
I first installed the -dbg package (in version 4.1.16-dfsg-1) and started
virtualbox using gdb:
Here is a copy of the gdb session:
$
Package: obnam
Version: 1.0-1
Severity: normal
Hello,
During the initialization of the first backup, the creation of the
metadata on the repository side might take a few time; I assume that
this happens especially when gpg encryption is used.
If the backup is interrupted at this time, it is then
Package: obnam
Version: 1.0-1
Severity: normal
Hello,
obnam does not release the repository lock when an error is raised.
>From the error message I assume the error is correctly treated in obnam
(i.e. the error is correctly catched, and obnam does not crash
abruptly).
$ obnam --lock-timeout=3 -r
Package: obnam
Version: 1.0-1
Severity: normal
Hello,
obnam is not able to fsck-fix my backup repo. The error reported is:
"ERROR: Larch B-tree is in read-only mode, no changes allowed"
The fsck-errors were artificially created by aborting several times a backup.
This may be the normal behaviour
Package: python-larch
Version: 0.31-1
Severity: normal
Dear Maintainer,
I suspect a problem of indentation in fsck.py at line 107:
"
File "/usr/lib/python2.7/dist-packages/larch/fsck.py", line 107, in do
tracing.trace('fixed it: %s' % new_node.keys())
UnboundLocalError: local variable 'n
Package: virtualbox
Version: 4.1.14-dfsg-1
Severity: grave
Justification: renders package unusable
hello,
virtualbox segfaults. dmesg displays the following:
[33391.906793] VirtualBox[25243]: segfault at 0 ip 7fa49a5cf43a sp
7fffc3ee1140 error 4 in libQtCore.so.4.8.1[7fa49a54e000+2cc00
Hello Lars,
>
> -- Message transféré --
> From: Lars Wirzenius
> To: Damien Couroussé ,
> 675141-d...@bugs.debian.org
> Cc:
> Date: Wed, 30 May 2012 13:05:10 +0200
> Subject: Re: Bug#675141: obnam: please add an 'include' config parameter
&g
Package: obnam
Version: 0.29-1
Severity: wishlist
Hello!
It would be nice to have an 'include' parameter in the same way rsync
works.
Thus it would be possible to do things like :
exclude = .*
include = .git
regards,
Damien
-- System Information:
Debian Release: 6.0.5
APT prefers stable
A
Package: obnam
Version: 0.29-1
Severity: normal
Hello!
In a config file, I cannot use several occurrences of the 'exclude'
parameter.
For example, I would like to be able to do this in my config file :
--- obnam.cfg ---
# exclude some temp files
exclude = temp
# exclude other files
exclude =
Package: enigmail
Version: 2:1.4.1-2
Severity: normal
hello,
I have installed gpg-agent on my system, with pinentry for password
popups.
In enigmail logs, I can see that enigmail correctly finds the running
instance of gpg-agent :
2012-05-26 17:40:59.892 [DEBUG] enigmail.js: detected GnuPG ver
Package: enigmail
Severity: normal
Sorry for my previous mail; I had not seen that version 1.4 was packaged
in unstable.
I do not report this problem with this version.
Thanks!
Damien
-- System Information:
Debian Release: 6.0.4
APT prefers stable-updates
APT policy: (990, 'stable-updates')
On 18/03/2012 10:43, Willi Mann wrote:
> Hi!
>
>> I have just installed this package.
>> Opening the prefs window, it reports that it cannot find GnuPG, but this
>> one is installed.
>> Works perfectly after I have explicitely given the path to /usr/bin/gpg.
>
> I cannot reproduce this problem. Cou
Package: gpxviewer
Version: 0.4.1-1
Severity: normal
Tags: upstream
A description of the bug is provided here:
https://bugs.launchpad.net/ubuntu/+source/gpxviewer/+bug/832059
A patch has been provided; please integrate to the Debian package.
regards,
Damien
-- System Information:
Debian Releas
Package: enigmail
Version: 2:1.3.4-2
Severity: normal
Hello,
I have just installed this package.
Opening the prefs window, it reports that it cannot find GnuPG, but this
one is installed.
Works perfectly after I have explicitely given the path to /usr/bin/gpg.
regards,
Damien
-- System Informa
Package: enigmail
Version: 2:1.0.1-5
Severity: important
Hello,
I have just installed this package from stable, but I does not work in icedove.
Indeed, in the 'extensions' panel in icedove, it appears the version of
icedove/thunderbird currently installed on my system is not compatible
with enign
Package: timer-applet
Severity: normal
Hello,
I do get blinking, and it is working with a custom sound.
I got no sound with the default settings.
regards,
-- System Information:
Debian Release: 6.0.4
APT prefers stable
APT policy: (990, 'stable'), (600, 'testing'), (300, 'unstable')
Archite
Package: zim
Version: 0.48-1
Severity: normal
Tags: upstream
Additional info for upstream bug #704728
best regards,
-- System Information:
Debian Release: 6.0.4
APT prefers stable
APT policy: (990, 'stable'), (600, 'testing'), (300, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6
On 13/12/2010 09:46, Josselin Mouette wrote:
severity 606685 important
thanks
Le vendredi 10 décembre 2010 à 23:25 +0100, Damien Couroussé a écrit :
Package: evince
Version: 2.22.2-4~lenny1
Severity: grave
Justification: renders package unusable
Hello, evince segfaults when trying to
Hello,
I have upgraded my cups packages to testing, it seems that the problem
is fixed.
If you have interested I have kept a core file for the problem I have
reported yesterday.
Currently (with issue fixed) the list of cups packages on my computer is:
$ dpkg -l '*cups*' | grep ^i
ii cups
Package: evince
Version: 2.22.2-4~lenny1
Severity: grave
Justification: renders package unusable
Hello, evince segfaults when trying to print PDF files on a network
printer.
It looks to be related to this bug report on Ubuntu:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/660731
Printing a
Package: aptitude
Version: 0.4.11.11-1~lenny1
Severity: important
Hi!
I have met an error with aptitude; I have tried to reproduce the bug
using LANG=C to get more information about the bug on Internet, but
changing the locales made the bug disappear.
$ locale
Package: foomatic-filters
Version: 4.0-20090509-1
Severity: normal
File: foomatic
Hello,
I have the same problem.
I do also want to report that the package ghostscript-cups is installed on my
machine :
dam...@alain:~$ LANG=C dpkg -l ghos*
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/
Package: apt
Version: 0.7.25.3
Severity: important
File: /usr/bin/apt-get
Hello,
apt-get source reports an error while trying to acquire locks under
/var/lib/apt/lists
- apt-get is run without root superuser power,
- non other apt/aptitude processes are running at the same time,
- except for
Package: openbox
Version: 3.4.10-1
Severity: normal
Hello,
Please find attached a patch
The fix was found here:
http://bugs.archlinux.org/task/17802
Cheers,
Damien
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (600, 'unstable'), (200,
53 matches
Mail list logo
