Mark Harig schrieb:
Reini Urban writes:
> scsh - the "scheme shell" - has been added to the cygwin distribution.
Thank you for providing this package.
1. This package is classified in 'setup' as a 'Misc' package. Should
this package be classified as a 'Shell' package instead?
"Shells"
Brian Dessent schrieb:
Thorsten Kampe wrote:
I've noticed on two computers that this package was installed without
me manually selecting it. On the other hand I could see no other
package depending on it. How come?
Because it was incorrectly listed in category Misc for a few hours.
Setup wil
JamesStock wrote:
Hi I am having issues w/ the following config:
Rule of thumb: Don't use non Cygwin stuff with Cygwin stuff!
Corollary: Well since Cygwin runs under Windows there are many
interactions and you can use some (a lot) of non Cygwin stuff with Cygwin.
Corollary #1: If you're gonn
David Christensen wrote:
Steve Holden wrote:
Well there's no need to be so defensive. A simple "that doesn't
work", preferably with a following "because ..." would have been
quite adequate. Now I have seen your reply to Andrew DeFaria I am
somewhat better informed.
If my tone put you off, I ap
Steve Holden wrote:
> Well there's no need to be so defensive. A simple "that doesn't
> work", preferably with a following "because ..." would have been
> quite adequate. Now I have seen your reply to Andrew DeFaria I am
> somewhat better informed.
If my tone put you off, I apologize. Understand
Hi, thx for the response. I tried w/ 'mysql -h 127.0.0.1 -u -p'
(substitute the s w/ the appropriate username and passwd of course) and
it seems to just 'hang' there w/out doing anything. If I entered an invalid
username, it'll immediately give me ERROR 1045 (28000): Access denied fo
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
JamesStock wrote:
> I have Apache, mysql, PHP and perl (activestate) installed in my XP (NOT
> through cygwin but installed individually). I can use dos prompt and
> connect to mysql DB (e.g mysql -U -P?), I can also use Mysql-Front /
> SQLy
On 8/30/07, Larry Hall (Cygwin) wrote:
> dwkimery wrote:
> > I downloaded the Cygwin setup.exe and attempted to run it.
> > I first received an "Open File - Security Warning" dialog
> > box with the message "The publisher could not be verified.
> > Are you sure you want to run this software. ...
Hi I am having issues w/ the following config:
I have Apache, mysql, PHP and perl (activestate) installed in my XP (NOT
through cygwin but installed individually). I can use dos prompt and
connect to mysql DB (e.g mysql -U -P?), I can also use Mysql-Front /
SQLyog to connect to mysql (lo
For the sake of completeness, using Emacs CVS 20070829 07:20 (cvs -z3
-d:pserver:[EMAIL PROTECTED]:/sources/emacs co -P -D
"29 Aug 2007 7:20" emacs) bootstraps, while the CVS of few minutes later,
7:30, fails in bootstrapping as described.
It looks the problem is in src/term.c.
Cheers,
Ange
On 8/29/07, Dmitry Karasik wrote:
> I'd like to submit a bug in cygwin implementation of sin().
> the difference is in 7th digit, and is significant for double precision.
This is not a bug in newlib.
The problem is in glibc and msvc and newlib is (more) correct in this case.
Or, to put it anothe
dwkimery wrote:
I downloaded the Cygwin setup.exe and attempted to run it.
I first received an "Open File - Security Warning" dialog
box with the message "The publisher could not be verified.
Are you sure you want to run this software. ... ". I then
clicked on the "Run" button and received th
Trying to start the apache2 httpd daemon in cygwin and i get the
following error:
Aug 30 16:55:14 localhost cygwin_apache2: PID 3232: service
`cygwin_apache2' failed: signal 12 raised
im guessing signal 12 is defined in the errno.h ?
$grep 12 /usr/include/sys/errno.h
#define ENOMEM 12 /* N
Please see the Subject.
Thanks for your kind attention to this request.
- Barry
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Problem reports: http://cygwin.com/problems.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/fa
> OK. The way you're running it, though, means that the user that you log
> in as must be the same user as is running 'sshd'. Are you using password
> or pubkey authentication? Your better off with password in this case.
>
Correct. So after ssh-user-config didn't work, I removed the .ssh direc
I downloaded the Cygwin setup.exe and attempted to run it.
I first received an "Open File - Security Warning" dialog
box with the message "The publisher could not be verified.
Are you sure you want to run this software. ... ". I then
clicked on the "Run" button and received the message
"C:\Docu
Jeremy K. Truax wrote:
Since you're starting things this way, I assume you realize the
limitations
it imposes and the issues you will need to deal with when you migrate
back
to running this as a service. If you don't, I recommend just wiping your
installation and reinstalling (this isn't requi
I have an existing installation of cygwin on my computer.
Using the cygwin setup program version 2.573.2.2,
I decide to add the program flac.
I select flac, and it gets installed.
When I run it, nothing happens when I run it from bash.
When I run it from a windows command prompt, it produces
a pop-
> Since you're starting things this way, I assume you realize the
> limitations
> it imposes and the issues you will need to deal with when you migrate
back
> to running this as a service. If you don't, I recommend just wiping your
> installation and reinstalling (this isn't required but it's oft
A few quick comments:
Jeremy K. Truax wrote:
Hi all
I've been trying to get sshd running on Cygwin on Windows XP. Just to
give a quick summary of the problem, I'll start up the sshd service and
try to connect from another machine or even from localhost and it will
hang. So I have been try
Hi all
I've been trying to get sshd running on Cygwin on Windows XP. Just to give a
quick summary of the problem, I'll start up the sshd service and try to connect
from another machine or even from localhost and it will hang. So I have been
trying to get it working by just running it from the
David Christensen wrote:
Steve Holden wrote:
I posted alternative content for the batch script that would save you
from putting two unnecessary lines in the shell script. Or so I
thought.
The -l (or --login) option has bash read its usual startup files,
thereby avoiding the need four the course
Steve Holden wrote:
> I posted alternative content for the batch script that would save you
> from putting two unnecessary lines in the shell script. Or so I
> thought.
> The -l (or --login) option has bash read its usual startup files,
> thereby avoiding the need four the course (".") commands at
Andrew DeFaria wrote:
> I think he was saying that this:
>$ cat ssh-backup-all.bat
>C:\cygwin\bin\bash ./ssh-backup-all
>$ cat ssh-backup-all
>#! /bin/sh
>. /etc/profile
>. /home/dpchrist/.bash_profile
># do backup stuff
> could be reduced to this:
>$ cat ssh-bac
David Christensen wrote:
I wrote:
$ cat ssh-backup-all.bat
C:\cygwin\bin\bash ./ssh-backup-all
Steve Holden wrote:
Wouldn't it be possible to omit the first two executable lines and
have the batch script read
c:\cygwin\bin\bash -l ./ssh-backup-all
I posted a sample shell session
On 30 August 2007 01:35, Brian Egge wrote:
> When running mkgroup after installing cygwin I receive the following
> error:
>
> $ mkgroup -l -d > /etc/group
> mkgroup (366): [2123] The API return buffer is too small.
>
> I suspect this is due to the large number of groups our organization
> has.
David Christensen wrote:
I wrote:
$ cat ssh-backup-all.bat
C:\cygwin\bin\bash ./ssh-backup-all
Steve Holden wrote:
Wouldn't it be possible to omit the first two executable lines and
have the batch script read
c:\cygwin\bin\bash -l ./ssh-backup-all
I posted a sample shell session. The "$ cat ss
I wrote:
> $ cat ssh-backup-all.bat
> C:\cygwin\bin\bash ./ssh-backup-all
Steve Holden wrote:
> Wouldn't it be possible to omit the first two executable lines and
> have the batch script read
> c:\cygwin\bin\bash -l ./ssh-backup-all
I posted a sample shell session. The "$ cat ssh-bac
On 8/30/07, Larry Hall (Cygwin) <[EMAIL PROTECTED]> wrote:
> Senthil Nathan wrote:
> > Hi,
> > I'm using cygwin for the first time to compile my programs.
> >
> > I get the following error during dynamic loading of my libraries.
> > And I came to know that there is no concept of "ldconfig".
> >
> >
PACKAGE DESCRIPTION
===
Homepage: http://freshmeat.net/projects/quilt/
License : GPL
Tool to work with series of patches
Program manages a series of patches by keeping track of the changes each
of them makes. They are logically organized as a stack, and you can
apply, un-apply, r
Henry S. Thompson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I was reminded by the recent spate of new packages -- how hard would
it be for Setup to support a 'New' category, which new packages go
into automatically, and expire out after. . .three months? I only
update once every mont
Senthil Nathan wrote:
Hi,
I'm using cygwin for the first time to compile my programs.
I get the following error during dynamic loading of my libraries.
And I came to know that there is no concept of "ldconfig".
So how do I load my dynamic libraries while compiling.
this is the command i run on
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I was reminded by the recent spate of new packages -- how hard would
it be for Setup to support a 'New' category, which new packages go
into automatically, and expire out after. . .three months? I only
update once every month or so, and often think "N
On 30 August 2007 01:40, Eric Blake wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> According to Dave Korn on 8/29/2007 11:00 AM:
>>
>> It would be worth going back through the archives; IIRC, this was a
>> recent change made by CV in response to a PR on the list. Any un-cautious
Gary Johnson wrote:
The first time you do that, windows will complain it doesn't know what to do
with a sh file, and offer you the choice of looking up on the web or selecting
from a list which program you want to open .sh files with; choose the
select-from-a-list option, when the list appears
Thorsten Kampe wrote:
> I've noticed on two computers that this package was installed without
> me manually selecting it. On the other hand I could see no other
> package depending on it. How come?
Because it was incorrectly listed in category Misc for a few hours.
Setup will always try to insta
* Reini Urban (Wed, 29 Aug 2007 22:59:38 +0200)
> scsh - the "scheme shell" - has been added to the cygwin distribution.
I've noticed on two computers that this package was installed without
me manually selecting it. On the other hand I could see no other
package depending on it. How come?
Thor
37 matches
Mail list logo
