Re: Stus-List LF38 Dodger available...

I am definitely interested. Please forward pics. Dr. Brian C. Morrison > On Jun 28, 2014, at 1:15 PM, "Spencer Johnson via CnC-List" > wrote: > > I am replacing my aging-but-serviceable Dodger and SS Frame with a full > enclosure. The Zippers have been replaced. The vinyl windows could be

Stus-List Dingy Repair

Hello fellow CnCer's, I have a mercury inflatable dingy. It has been a challenge ever since I purchased it. Dealing with keeping it clean, managing it at the marina (no dingy racks), repairs, etc. has not been fun. My current issue is a slow leak in the forward seam. I have read about a sealer

Re: Stus-List Dingy Repair

Thanks for the feedback everyone. I have to take a look at the intake valves again. "He gonna gimme my ham, my ham, my ham! He gonna gimme my ham!" August Wilson's Hambone. > On Aug 7, 2014, at 9:47 PM, "Ron Ricci" wrote: > > Brian, > > I used the stuff from West Marine > (http://www.west

Re: Stus-List Dingy Repair

Thanks for the feedback everyone. I have to take a look at the intake valves again. "He gonna gimme my ham, my ham, my ham! He gonna gimme my ham!" August Wilson's Hambone. > On Aug 7, 2014, at 9:47 PM, "Ron Ricci" wrote: > > Brian, > > I used the stuff from West Marine > (http://www.west

Re: Stus-List Ok more atomic 4 issues...dammit!

Could be the carburetor. I've had this issue too many times. I chose to take off the carb, break it down completely and clean it out. Moyer Marine's A4 guide is very useful. Brian s/v Rekofa The Blue Whale 1979 C&C 34 Baltimore, MD Dr. Brian C. Morrison > On Aug 10, 2014, at 9:48 AM, "Burt St

cnc-list@cnc-list.com

The bilge pump on my 1979 C&C34 has died. I would like to replace it with the same type. It is the original which is mounted on the wall in the lazaret. It pulls water from a hose in the bilge and pumps it overboard through a hose connected on the opposite side of the pump. Does anyone know wher

cnc-list@cnc-list.com

t; -Original Message- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Brian > Morrison via CnC-List > Sent: Saturday, March 14, 2015 2:44 AM > To: cnc-list@cnc-list.com > Subject: Stus-List Original Bilge Pump C&C34 > > The bilge pump on my 1979 C

Stus-List Best Engine?

Hello, I often sail with a group of sailors that have more modern and somewhat larger boats than my 1979 C&C34. When there is no wind and we are forced to motor I have difficulty keeping up. With a clean bottom my cruising speed is about 5-5.5 knots. I have an Atomic 4 engine. I'm wondering wou

Re: Stus-List Best Engine?

time and money. > > Danny > Still shopping > MassachusettsOn Jul 14, 2015 12:47 AM, Brian Morrison via CnC-List > wrote: >> >> Hello, >> >> I often sail with a group of sailors that have more modern and somewhat >> larger boats than my 1979 C&C34.

Stus-List Fuel Tank Cleaning/Removal

Hello, I have a 1979 C&C 34 with the original aluminum fuel tank. I've recently had some engine shutdown issues that I've traced to my fuel tank. Ideally I would like to replace the tank with a plastic one. That was recommended by the surveyor when I purchased the boat. The problem is access. T

Stus-List Window/Hatch/Blinds Upgrades

Hello, I have a 1979 C&C 34. It’s time to upgrade my windows, forward hatch, companionway hatch and blinds. The windows and hatches are leaking and have crazing. The blinds are worn and outdated. Any leads/advice is much appreciated. Thanks Brian S/V Rekofa 1979 C&C34

Stus-List Re: need fuel pump for Universal M4-30

I go to moyer marine for most of my A4 parts. Dr. Brian C. Morrison > On Aug 16, 2021, at 8:56 PM, Rick Brass via CnC-List > wrote: > > Mine is an M35B, not theM4-30. Do you have a mechanical or an electronic > lift pump? > > The electronic lift pump on mine was originally a problem, Univer

Stus-List Bow Repair

Hello All, I had an unfortunate encounter with a buoy and my 1979 C&C 34 suffered pretty severe damage to the bow. The chain plate for the forestay was bent and needs to be replaced. There is some fiberglass repair needed as well. I’m thinking of fixing it myself. Anyone know where I can get a

Stus-List Re: Bow Repair

Thanks Joel Dr. Brian C. Morrison On Sep 25, 2021, at 12:02 PM, Joel Aronson via CnC-List wrote:  Sorry Kato marine On Sat, Sep 25, 2021 at 11:05 AM Joel Aronson via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Kari Marine in Annapolis On Sat, Sep 25, 2021 at 8:45 AM Brian Morris

Stus-List Haul Out Question

Hello CnCers, I’m hauling out for the winter at a new boat yard. I’m having the mast pulled to do some work. I’ve never pulled the mast with the furling drum. I was wondering if the drum stays attached to the forestay, remains on the bow or is completely removed. Appreciate any responses. Than

Stus-List Re: Haul Out Question

n a string Original message ---- From: Brian Morrison via CnC-List Date: 2021-11-13 08:44 (GMT-05:00) To: Stus-List Cc: Brian Morrison Subject: Stus-List Haul Out Question Hello CnCers, I’m hauling out for the winter at a new boat yard. I’m having the mast pulled to do some work.

Stus-List Fwd: Forestay Backing Plate

From: Brian Morrison Date: February 7, 2022 at 11:59:05 PM EST To: cnc-list@cnc-list.com Subject: Forestay Backing Plate  Hello All, As I shared back in the summer I had an untimely rendezvous with a buoy that caused some pretty severe damage to the bow of my 1979 C&C 34. I am in the proce

Stus-List Re: Forestay Backing Plate

reviewing some of their “how to” info to get a good overview. Decades ago when I started using West Systems epoxy and fillers I found their info to be a good update to my “shade tree” fiberglass skills. Martin DeYoung Calypso 1971 C&C 43 Port Ludlow/Seattle From: Brian Morriso

Stus-List Re: Defender sale scheduled this month

I drove up from Baltimore about 10 years ago to buy a dingy. Made a ride trip out if it with my brother. Dr. Brian C. Morrison On Mar 5, 2022, at 12:46 PM, ALAN BERGEN via CnC-List wrote:  Remember to let us know when the sale begins. Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR

Stus-List Bow Repair

Hello Everyone, I have paid my penance. I have read the Bible, taken plenty of cold showers and rough rags on my skin to rid my flesh of microscopic fiberglass remains. I finally finished the bow repair I shared with the list last summer. Much thanks for all the advice and encouragement, especi

Stus-List Forward Hatch Handles

Hello, Does anyone know where I can purchase replacement handles for the forward v-berth hatch on a 1979 C&C34? I am replacing the hatch but cannot remove the pin/screw that holds the exterior knob in place on one of them. I think I may have to cut it off and get a new one. Thanks Brian C. Mo

Stus-List Re: Forward Hatch Handles

Thanks for the feedback everyone. Brian C. Morrison On Mar 12, 2023, at 1:52 PM, John Read via CnC-List wrote:  Contact Atkins & Hoyle and Hatchmasters in Stratford CT On Sat, Mar 11, 2023, 10:51 PM Brian Morrison via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Hello, Does a

Stus-List Bilge Pump Intake Hose

Hello Mates, Can anyone tell me the specific type of hose used for the intake on a bilge pump? The pump in my CnC34 stopped pumping out. I checked the suction on the pump by temporarily disconnecting the existing hose and attaching a temporary. I put it in a bucket of water and the pump worked

Stus-List Re: Bilge Pump Intake Hose

ds Trevor On Wed, Jun 7, 2023, 5:00 p.m. Brian Morrison via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Hello Mates, Can anyone tell me the specific type of hose used for the intake on a bilge pump? The pump in my CnC34 stopped pumping out. I checked the suction on the pump by temporari

Stus-List Re: Bilge Pump Intake Hose

potential debris or blockage? Mine did the same thing before I launched this year and I managed to clear it out with a wire after a few jabs then it worked fine. Regards Trevor On Wed, Jun 7, 2023, 5:00 p.m. Brian Morrison via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Hello Ma

Stus-List Re: Bilge Pump Intake Hose

year and I managed to clear it out with a wire after a few jabs then it worked fine. Regards Trevor On Wed, Jun 7, 2023, 5:00 p.m. Brian Morrison via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Hello Mates, Can anyone tell me the specific type of hose used for the intake on a bilge pump

Stus-List Bilge Pump Replacement

Good Morning, The Jabsco diaphragm bilge pump has lost suction and needs to be replaced on my 1979 C&C34. The original model has been discontinued (37202-). The closest match is the 37202-2012. The original pumps at 4.5gpm. This one is only 3gpm. Is this the best option or is there another

Stus-List Re: Bilge Pump Intake Hose

. Third was a blockage similar to the first. Same solution John Read Legacy III 1982 C&C 34 Noank, CT From: Brian Morrison via CnC-List Sent: Wednesday, June 07, 2023 3:01 PM To: Stus-List Cc: Todd Williams ; Brian Morrison Subject: Stus-List Re: Bilge Pump Intake Hose Hello Todd, Whil

Stus-List Re: Bilge Pump Replacement

Many available. Low clearance in the 34 C&C bilge. Many available. Get Outlook for Android<https://aka.ms/AAb9ysg> ____ From: Brian Morrison via CnC-List Sent: Monday, June 26, 2023 6:36:54 AM To: Stus-List Cc: Brian Morrison Subject: Stus-List Bilge Pu

Stus-List Re: Bilge Pump Replacement

Thanks Dr. Brian C. Morrison > On Jun 27, 2023, at 6:50 PM, Josh via CnC-List wrote: > > https://www.marineengine.com/boat-accessories/plumbing/gulper-320-shower-bilge-waste-pump-whale-water-systems.php?msclkid=c321d1f6c67411f652dcb56da39db79b > > The actual pump doesn't need to be in the bilge

Stus-List Steaming and Deck Light

Hello Everyone, I have a 1979 C&C 34. After a recent trip up the mast I discovered I really need to replace my steaming and deck lights. Any recommendations or suggestion appreciated. Thank you. Brian Morrison Baltimore, MD Sent from Mail for Wi

Stus-List Masthead Light Fitting

Does anyone know what masthead light goes in this fitting. This is on my 1979 C&C 34. [cid:C1665EE8-586E-4043-AED6-7ED8E8A39941] Brian C. Morrison ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly app

Re: Stus-List Removing a C&C 34 fuel tank

Are you sure it’s not your carburetor (if this is the A4)? Dr. Brian C. Morrison > On Sep 6, 2020, at 5:07 PM, Dennis C. via CnC-List > wrote: > > To clarify, I switched from steel tank to plastic when I repowered with a > diesel. The 2 steel tanks that failed were in gasoline service. They

Stus-List Re: 2'x8' sheet of smoke grey 3/16th plexi in MD

I can be in the New York area (NYC) and am looking to replace the windows on my 1979 C&C34. How much do you have? Dr. Brian C. Morrison On Jun 17, 2021, at 12:36 PM, rockland bazemore via CnC-List wrote:  Thanks Al, I just confirmed my portlights are also 1/4”. If anyone in the New York are

Stus-List Re: 2'x8' sheet of smoke grey 3/16th plexi in MD

a couple days. Let me know how much u need and I'll part with it for a what i paid price. On Thu, Jun 17, 2021 at 3:16 PM Brian Morrison via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I can be in the New York area (NYC) and am looking to replace the windows on my 1979 C&am

Stus-List Re: New Foresail.

I recently used FX Sails. Delivery is expected within the next 2 weeks - fingers crossed. Brian Morrison On Jul 11, 2021, at 12:58 PM, Dale Hazlehurst via CnC-List wrote:  Precision Sails has served the cruising community for many years with superb sales staff and high quality sails. They'