Stus-List test

one ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray

Re: Stus-List test

two -Original Message- From: CnC-List On Behalf Of Della Barba, Joe via CnC-List Sent: July 2, 2019 9:55 AM To: 'cnc-list@cnc-list.com' Cc: Della Barba, Joe Subject: Stus-List test one ___ Thanks everyone for supporting this list with yo

Re: Stus-List test

buckle my shoe > On Jul 2, 2019, at 7:56 AM, Paul Fountain via CnC-List > wrote: > > two > > -Original Message- > From: CnC-List On Behalf Of Della Barba, Joe > via CnC-List > Sent: July 2, 2019 9:55 AM > To: 'cnc-list@cnc-list.com' > Cc: Della Barba, Joe > Subject: Stus-List test

Re: Stus-List C&C 33 Parting out - Victoria BC

I wonder if that stern boarding ladder would work on my 35 mk2... lots of other good stuff. Sad to see of course, but I could use some upgrades! -- Shawn Wright shawngwri...@gmail.com S/V Callisto, 1974 C&C 35 https://www.facebook.com/SVCallisto On Fri, Jun 28, 2019 at 10:42 PM Peter Fell via CnC

Re: Stus-List Rod rigging on a c&c 30 mkii

Thank you all, worked out well and ready to go! Cheers Envoyé de mon iPhone > Le 1 juill. 2019 à 07:23, Michael Brannon via CnC-List > a écrit : > > Maurice, the stem ball fittings rotate as they are tightened. They are > basically threaded to a spacer piece which goes through the mast an

Stus-List Driveshaft Castel Nut Thread size

Good afternoon all. I need some help figuring out on the thread castle nut used to hold the prop on my 34+ . It's a 1 1/8 stainless steel shaft with a tapered end. I know the thread is not 3/4 - 10 because I bought replacement castle nut with that thread and they did not work, it looked small .

Re: Stus-List Rod rigging on a c&c 30 mkii

What did you end up finding/doing? Just pull and it came out straight? Josh On Tue, Jul 2, 2019, 1:21 PM MAURICE POULIN via CnC-List < cnc-list@cnc-list.com> wrote: > Thank you all, worked out well and ready to go! Cheers > > Envoyé de mon iPhone > > Le 1 juill. 2019 à 07:23, Michael Brannon v

Re: Stus-List test

3-4 John Conklin South East Sales and Business Development cel 301-412-8991 j.conk...@marraforni.com www.marraforni.com From: CnC-List on behalf of Randy Stafford via CnC-List Sent: Tuesday, July 2, 2019 10:14:55 AM To: cnc-list Cc: R

Re: Stus-List test

Shut the door Neil Andersen 20691 Jamieson Rd Rock Hall, MD 21661 From: CnC-List on behalf of John Conklin via CnC-List Sent: Tuesday, July 2, 2019 5:28 PM To: cnc-list@cnc-list.com Cc: John Conklin Subject: Re: Stus-List test 3-4 John Conklin South East Sale

Stus-List 29-2 stuffing box packing.

What size is needed please? 1/4? ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray

Re: Stus-List test

...but you can't make it drink. Steve Staten "C'Est La Vie", C&C 26 Langley, OK, USA ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to sen

Re: Stus-List B&G Boat rotation on screen

Sorry for the delay, The compass has been installed for awhile, It did show on the Zeus3, and I did the turns. It was reporting within a couple degrees of my actual heading. So, that seems like it is behaving. There is one data wire around it, I doubt if there is anything in that wire that

Re: Stus-List B&G Boat rotation on screen

Hello Josh, Yes, I believe it is an AP20, I would love to get that manual, but the link is dead, Jim. I think it is giving me a correct reading, I think it is something in the Zeus setup, like course up, head up, altho I have changed those numerous times . . . . Regards, Bill Coleman

Re: Stus-List B&G Boat rotation on screen

Just to be clear on this, my fluxgate compass heading seems to be correct, But the little boat symbol is rotated 135 degrees clockwise, and my wind is off by either that amount or 180 degrees, I can’t remember that part now. Bill Coleman From: CnC-List [mailto:cnc-list-boun...@cnc-lis

Re: Stus-List Shaft Log leak on C&C 29 MkII

I don’t think it is a good idea to just fill with epoxy, there is not much to keep that from cracking again with all the vibration there. I would say feather it well, and use either fiberglass, or a Kevlar/Carbon blend to repair the crack, (with West System) to give it some strength. Bill