From: tom hoffmann
Sent: Monday, May 28, 5:14 PM
Subject: Thank you
To: cnc-list@cnc-list.com
To Ken Heaton.
I haven't figured out quite yet how to go about replying to you such that it
appears below your entry in the string.
My memory isn't quite what I remember in recent years. The instant
Hi,
The thermostat on the raw water cooled Yanmar 3QM30H has always been a bit of a
mystery on the use of one thermostat or two thermostats. While there appears
to be two thermostat holes in the housing, the service manual shows a diagram
of only one thermostat and the discussion is in regards
Hi,
I am wondering if any LF38 owners have replaced the original cast stemhead/bow
roller?For those not familiar with LF38 stemhead, it is a triangular cast
plate on the bow which incorporates bow chocks and rollers along with the
connection point for the forestay. I found a crack in mine
Paul, a friend had a stainless one made for his Pretorian (old one was stolen).
I think he used 3/16 or 1/4 inch stainless plate, made a pattern from 1/4
plywood. Came out a work of art.
Doug Mountjoy Rebecca Leah LF39 POYC, WA.
Original message From: Dreuge via CnC-List
D
Does anyone know it the rectangular plate under the mast of the LF39 is
attached to the mast or does the mast just sit on it? Doesn't look like the
plate will clear mast hole in deck.
Sent from my T-Mobile 4G LTE DeviceDoug Mountjoy Port Orchard YC Rebecca Leah
Lf39___
Hi, Paul — I’ve actually got a spare casting sitting in my garage; I don’t
necessarily want to part with it, but could it serve as a pattern to have a new
weldment made up out of stainless or aluminum for you? Maybe one with some
improvements… And maybe they could make more than one… :^)
—
Paul, can't help with a source, but if you find one let me know. I have to
replace mine. It lost a fight with a bridge in the ICW.
Paul Marble
C&C 38 OF
Tina Marie
Madeira Beach, FL
On Tue, May 29, 2018, 2:20 PM Dreuge via CnC-List
wrote:
> Hi,
>
> I am wondering if any LF38 owners have replace
Hi All,
The "Y" on my where the cooling water connects to the exhaust rusted out
and I am rebuilding it. It was made out of 1 1/4 " steel water pipe. A 3/8
" piece was welded onto 6" of straight pipe to make a "Y". The 3/8" piece
is where the cooling water would travel into the 1 1/4" exhaust.
M
Hi Thomas,
Below is what I know about the layup schedule on the 34 / 37 + boats. I got
this off a forum somewhere (Not this one) a few years ago.
Topsides (total thickness 1.19")
1. Gelcoat
2. 1.5 oz. Chop
3. 1.5 oz. Mat
4. C72K/100 Kevlar Fabmat
5. 1” Balsa Core
6. C72K/100 Kevlar Fabmat
Bottom
You can make these all kinds of ways. What kind of engine is it? Any chance of
a photo posted someplace?
Joe
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Steven
Tattrie via CnC-List
Sent: Tuesday, May 29, 2018 3:34 PM
To: cnc-list
Cc: Steven Tattrie
Subject: [EXT
Doug,
On my 32, the mast simply sits on it.
Neil
1982 C&C32 FoxFire
Neil Andersen
20691 Jamieson Rd
Rock Hall, MD 21661
From: CnC-List on behalf of svrebeccaleah via
CnC-List
Sent: Tuesday, May 29, 2018 2:32:05 PM
To: cnc-list@cnc-list.com
Cc: svrebeccaleah
Su
Thanks Paul..I saw the same resources and that is why I only had one new
thermostat...lol. I think now I will disassemble and take a harder look at the
configuration of the thermostat housing.
Bill
Sent from AOL Mobile Mail
On Tuesday, May 29, 2018 Dreuge via CnC-List wrote:
Hi,
The thermo
Mine is similar. When I asked about it on this forum maybe 20 years ago, I was
advised that the water should be aimed downstream so that it would not have any
possibility of backing up into the engine (on shutdown, maybe?). When
replacement time came, I duplicated what I had.
Gary
From:
Kevin Benoit used 3M Restorer and Wax on his new to him 35-2. Good results.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Sun, May 27, 2018 at 9:14 PM, Alex Giannelia via CnC-List <
cnc-list@cnc-list.com> wrote:
> My "new" paint job is 8 years old and some areas are no longer shiny due
> to stra
You could use this and a reducer:
https://www.mcmaster.com/#standard-pipe-fittings/=1d21j7s
Joe
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary
Nylander via CnC-List
Sent: Tuesday, May 29, 2018 4:22 PM
To: cnc-list@cnc-list.com
Cc: Gary Nylander
Subject: [EXTERNA
If its Awlgrip...Andrew is correct. Awlwash, Finesse, Awlwash then Awlcare.
Anything else at your own risk. Awlgrip is very unforgiving.
>From my Android...
From: CnC-List on behalf of Dennis C. via
CnC-List
Sent: Tuesday, May 29, 2018 4:32:30 PM
To: CnC
16 years, 3QM30 with a Sendure and one thermostat. No problems.
>From my Android...
From: CnC-List on behalf of William Walker via
CnC-List
Sent: Tuesday, May 29, 2018 4:04:12 PM
To: cnc-list@cnc-list.com
Cc: wwadjo...@aol.com
Subject: Re: Stus-List thermosta
Replaced well paid for replacement Friday of my exhaust elbow on my 82 /37ft
yanmar 3HM sure it could not be original but it was full of $#!^ for sure
John Conklin
From: CnC-List on behalf of Rick Brass via
CnC-List
Sent: Monday, May 28, 2018 10:15:54 AM
Just posted on other thread YES a real PITA to get to and replace on my 3HM as
well $678 bucks later its done ! ouch!! ☹
John Conklin
From: CnC-List on behalf of Nauset Beach via
CnC-List
Sent: Monday, May 28, 2018 10:53:45 AM
To: cnc-list@cnc-list.com
Cc: Nau
19 matches
Mail list logo
