Re: Stus-List Battery Charger

My Guest Pro 2815 died the same way. I replaced mine with a ProMariner Pronautic 1230P. Gary S/V Kaylarah '90 C&C 37+ East Greenwich, RI, USA ~~~_/)~~ On Fri, May 5, 2017 at 9:45 PM, robert via CnC-List wrote: > My old Guest Pro Battery Charger Model 2815 seems to have hit the > dust.

Re: Stus-List Battery Charger

I was looking at installing a Genius Gen2 20A unit. I found some good reviews on it. Anyone have experience with this one? James Flamingo IV '71 C&C 35 Lake of the Woods, Ontario Sent from my iPad > On May 6, 2017, at 5:56 AM, Gary Russell via CnC-List > wrote: > > My Guest Pro 2815 died t

Re: Stus-List Battery Charger

I had two Guest chargers on previous boats that similarly just died. On my current boat I installed a Charles 3-bank (I think it's 30 amp) "smart" charger. It was expensive, but is robust. I haven't had any issues since I installed it several years ago. -Original Message- From: rob

Stus-List Stripping the bottom

Hey everyone. I am in the middle of stripping the bottom paint off of my C&C 36. I would day tjere is 30 years of bottom paint. There are no blisters juat that muck of thr oaint was flaking off. Once done I will be doing the barrier coat and reapplying the bottom paint.I burned throu

Stus-List Deck non-skid

So...I'm looking at a hairline crack in non-skid portion of foredeck, right at the seam where the foredeck ends and the trunk cabin begins. Needs attention, and thinking of creating a one-inch bright gelcoat "stripe" that follows the contour of the forward edge of the cabin. This would allow a go

Stus-List Stripping the bottom

Adam: I am no expert on this topic but my guess is that the adequate thickness of your barrier paint will be all you need. Rob Abbott AZURA C&C 32 - 84 Halifax, N.S. On 2017-05-06 10:01 AM, Adam Hayden via CnC-List wrote: Hey everyone. I am in the middle of stripping the bottom paint off o

Stus-List Watch the America's Cup in Bermuda and pick up some blue water time

As some of you will recall, I'm taking Imzadi to Bermuda as part of the "Rally to the Cup" to see the Americas Cup finals. My outbound crew from Annapolis to Bermuda is complete, and includes two other listers, but I still have room for one or two more crew on the return trip. The racing will b

Stus-List Stripping the bottom

I would only reapply gelcoat if your concerned it about the cosmetics. The multiple coats of epoxy barrier coat will take care of the bare spots. On May 6, 2017 9:02 AM, wrote: Send CnC-List mailing list submissions to cnc-list@cnc-list.com To subscribe or unsubscribe via the World Wide

Stus-List C&C 37+ Dodger

When I bought Kaylarah, she didn't have a dodger and I always planned to add one. Now that I consider it more carefully, I'm not sure it's possible. The bridge deck is so high and the boom so low, that you would have to crawl into the cabin on you hands and knees to get in. Am I missing somethin

Re: Stus-List C&C 37+ Dodger

Gary, You can put one on, but it will be tall and will start pretty far forward to avoid the “crawling problem” See: http://www.jordanyachts.com/wp-content/uploads/2014/02/profile.jpg and http://www.thunderbirdmarine.com/imag

Stus-List C&C 37+ Dodger

have to crawl into the cabin on you hands and knees to get in. Am I > missing something? Has anyone put a dodger on a 37+? > > Gary > S/V Kaylarah > '90 C&C 37+ > East Greenwich, RI, USA > ~~~_/)~~ > -- next part -- > An HTML attac

Re: Stus-List Deck non-skid

Hi Chuck, The hairline crack in the gelcoat at that location is very common. You can open the crack up a bit, fill and sand smooth, then finish off with your stripe in gelcoat or paint. On C&Cs, the non-skid pattern is part of the deck mold so the deck gelcoat should be all the same colour

Re: Stus-List C&C 37+ Dodger

We really like ours. https://goo.gl/photos/x4cGiohJ6HK9SDWb9 https://goo.gl/photos/8PLCsi8X2q1ccTN57 https://goo.gl/photos/8PLCsi8X2q1ccTN57 https://goo.gl/photos/Xt5VZxquJWAejgjr5 https://goo.gl/photos/cjK3E2qULHRmRVt58 https://goo.gl/photos/2AXeA3csZytPRJ2S8 https://goo.gl/photos/ic1AG1km7

Stus-List Battery Charger - Update

I have concluded the old Guest charger is dead and I just bought a ProMariner dual bank charger. The new charger looks simple to connect + - connections to the two batteries and then plug it in to AC power. My old charger didn't 'plug in' to the main control panelit is hard wired from

Re: Stus-List C&C 37+ Dodger

Yep I got one too. Lots of things to take into consideration. The inside track, winch handle swing radius, standing height on the stairs There are lots of answers but none are perfect. If you don't give up the inside track then in order to provide head room the whole thing looks oddly tall

Re: Stus-List Battery Charger - Update

You will like it. We have the model 12 since our loads are small and no need for a faster charge with the 20. Convenient size and long leads. Bill Dakin > On May 6, 2017, at 2:29 PM, robert via CnC-List wrote: > > I have concluded the old Guest charger is dead and I just bought a ProMariner

Stus-List Mid 80s RC Marine deck fill adaptor problem solved

One of life's mysteries finally solved. http://cncwindstar.blogspot.ca/p/it-appears-i-am-one-of-fortunate-few.html Dave ___ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please

Re: Stus-List Battery Charger

I really like my Charles 30 amp. very robust. James C&C 38 1976 Oriental, NC On 5/6/2017 8:45 AM, Matthew L. Wolford via CnC-List wrote: I had two Guest chargers on previous boats that similarly just died. On my current boat I installed a Charles 3-bank (I think it's 30 amp) "smart" charge

Stus-List 33–2 secondary winches and t-track - worth considering?

The 33-2 deck has provision for secondary jib sheet winches and sheet lead blocks on a short length of coaming-mounted t-track. Windstar does not have either installed. How useful are the secondary winches and the coaming-mounted sheet leads? Thanks! Dave. Sent from my iPad ___

Re: Stus-List WESTERBEKE VS ATOMIC HEAT EXCHANGER

As long as you can get hoses on the heat exchanger and it either has an expansion tank or you add one, it will work. You'll need either a mechanical or electrical coolant pump too. I am on year 2 of FWC on my A4 now, I just did this conversion. Joe Della Barba j...@dellabarba.com Coquina C&C 35 M

Re: Stus-List Stripping the bottom

Interlux barrier coat is better than gelcoat. Do the barrier coat only. Dennis C. Touché 35-1 #83 Mandeville, LA Sent from my iPhone > On May 6, 2017, at 8:01 AM, Adam Hayden via CnC-List > wrote: > > Hey everyone. > > > I am in the middle of stripping the bottom paint off of my C&C 36.