I have one of those and it works fine.
Bill Coleman
C&C 39 Erie, PAanimated_favicon1
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck Saur
via CnC-List
Sent: Wednesday, March 02, 2016 6:56 PM
To: cnc-list@cnc-list.com
Cc: Chuck Saur
Subject: Stus-List FM antenna?
Yes sir I still have it
G H Newton Sent from my iPhone
> On Mar 6, 2016, at 20:58, Jake Brodersen via CnC-List
> wrote:
>
> Gary,
>
> If you still have the wheel, let me know. I'm local and interested.
>
> Jake
>
> -Original Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-li
I received the blessing from the Admiral to equip Zia with a folding prop
this season. I have been looking at our options and the Gori 2 blade geared
prop 11.5 X 8 looks like it would do the job.
Before I pull the trigger on this, I would like to check with the list for
opinions/experiences on b
I put a 13 X 9 Gori 2 blade on my on my Yanmar YSB12 equipped 27 MKIII and
after 7 or 8 years of service have no regrets whatsoever. The pitch of the prop
you select for your 30 depends very much on your engine and gearing, but in
general you want the largest diameter prop that will still give a
I'd be inclined to go with a three blade, if it's in the budget. It will be
much smoother than a two-blade.
Andy
C&C 40
Peregrine
Andrew Burton
61 W Narragansett
Newport, RI
USA02840
http://sites.google.com/site/andrewburtonyachtservices/
+401 965-5260
> On Mar 7, 2016, at 08:11, Joe at Z
I replaced my Max-Prop 3 blade feathering with a Gori ~ 4 years ago and have
zero issues since. The Gori was tested best/lowest drag of any folding prop by
Yachtworld (?). According to that test, its drag was almost too low to be
measured compared to the other props. Of course, I mostly club rac
I'm sittin' on a maxprop 2 blade 13" 1" shaft prop right now.
Came from a Nicholson 303. Works great, looks great. Pics if you want them.
J
Sent from my iPhone
> On Mar 7, 2016, at 8:11 AM, Joe at Zialater via CnC-List
> wrote:
>
> I received the blessing from the Admiral to equip Zia with a f
Almost all A4s use a 7/8" shaft. Just FYI, I had a Martec folding prop and
*hated it*. The ONLY good thing it did was fold up.
Sounds like the Gori is better.
joe
Coquina
C&C 35 MK I
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of JP Mail via
CnC-Li
When I was looking a number of years ago, I found the Flex-o-fold prop to be
of better quality than the Gori. Smoother mechanism, finer machining, etc.
Can't say much more because the Flex has been on the boat for over 10 years.
Happy.
Gary
30-1 Yanmar 2QM15.
-Original Message-
From: CnC-
I have the Gori 11.5 x 8 on Windburn, also with an Atomic 4.
My guess is that it is slightly over pitched and that 11.5 x 7.5
or 11.5 x 7 might be the optimal size.
I have not found it to be an issue since Windburn is kept light for
racing and bereft of bimini and dodger. While motor sailing, thos
I'll second the Flex-o-fold - have one on Perception, works well in forward and
reverse. Much better than the Campbell Sailor it replaced.
Paul Fountain
Perception II
1985 C&C 33-II k/cb
Port Credit Yacht Club
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Beh
Paul
And how is switching from forward to reverse? Does the boat stop quickly and
start moving astern or si it like the martec where it keeps going forward for a
long time?
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul
Fountain via CnC-List
It stops and reverses quickly - don't be afraid of the throttle though, a good
shot helps it and gets the flow over the rudder started, something I need when
reversing out of my slip as it is a bit tight.
Paul Fountain
Managing Director
SeaSource Inc.
Bookkeeping & IT Services.
-Original M
A friend of mine was interning in the early 70’s at C&C, and the Mega was one
of his projects. I forwarded to him this post by Stu, and this was his comment
below - Cracks me up!
Bill Coleman
C&C 39 Erie, PA
Subject: Re: Stus-List Birth of a Mega Putt Putt
This damn boat will
Joe,
I would recommend that you take a look at the forums at www.moyermarine.com.
You will find lots of discussion about the best prop for the direct drive
A4. Short answer is that 11.5x8 looks like too much pitch to me.
James
Delaney
1976 C&C 38 (with A4)
Oriental, NC
-Original Message---
Any ideas as to where I can find the molding between the acrylic and the
frame? I just pulled all of my port lights out and, if I can find new
molding, I would like to replace it. It's only 46 years old!
I am going to replace the lenses with a bronze acrylic and new butyl
rubber caulk. We u
Well, I just ordered the aluminum frame repair kit from South Shore
Yachts. That should fix it.
Neil Schiller
1970 Redwing 35, Hull #7
(C&C 35, Mark I)
"Corsair"
On 3/7/2016 5:28 PM, schiller via CnC-List wrote:
Any ideas as to where I can find the molding between the acrylic and
the frame?
Good advice on Moyer Marine, but I would also talk to the prospective suppliers
about it. When I bought mine last year, I found all of the distributors that
responded to my inquiry to be very helpful about recommending the right size
for my boat and primary uses. For Gori, I would recommend co
Here's two products that I use for that:
Frost King V25BK EPDM weatherstripping
M-D Building Products 01025 D Profile Auto and Marine Weatherstripping
I also think Duck makes one but only in gray.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Mon, Mar 7, 2016 at 4:28 PM, schiller via CnC-List
19 matches
Mail list logo
