We had a ‘heat pail” that burned ethanol or methanol years ago. It did get hot,
but burning hydrocarbons or alcohols inside a boat produces a ton of water
vapor which will condense all over the boat and you will end up warm and damp
and then cold and damp when you turn the thing off.
Joe
Coquin
Contact interlux tech support to ask this question. www.yachtpaint.com
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of robert via
CnC-List
Sent: Wednesday, November 18, 2015 11:40 AM
To: cnc-list@cnc-list.com
Cc: robert
Subject: Stus-List Antifouling
I have 3 different kinds of antifouling paint (Micron 66, Micron CSC and
another ablative with 43% copper ) ..approx. a litre or quart of each.
Would it be alright to dump all of it into one one gallon can and mix it
all together. I realize they might have different individual
effectiven
Mike:
I am not so sure I would trust them. years ago, I bought a Kirby 25
with VC 17...I wanted to put Micron CSC on the bottom but I did not
want to remove the VC17...I will never remove antifouling paint again.
I asked Interlux tech support if I could put the CSC over the VC
17
OK...
Tried vinegar. Tried Goo Gone.
Nothing.
Guess I'll go the muriatic acid route...
David F. Risch
(401) 419-4650 (cell)
Date: Wed, 11 Nov 2015 13:59:43 -0500
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Inflatable Cleaning
From: cnc-list@cnc-list.com
CC: captnga...@gmail.com
Davi
Bob
Ablatives can generally be applied over hard paints. I have contacted Interlux
support many times and have always been given this answer. Most recently I
enquired if I could apply Micron 66 over Petit Vivid and was told that I could
after a light sanding of the Vivid. Results were good a
Mary Kate markets a hypalon cleaner that works very well.
John McLaughlin
"Pyewacket"
-Original Message-
From: David via CnC-List
To: CNC CNC
Cc: David
Sent: Wed, Nov 18, 2015 12:56 pm
Subject: Re: Stus-List Inflatable Cleaning
OK...
Tried vinegar. Tried Goo Gone.
Nothing.
David:
I had some barnacles on my hull this year.on the advice of a C&C
lister, I used muriatic acid..diluted the acid (approx. 33% from the
retailer) 1 part acid to 5 parts water (down to say 6%).put in a
spray bottle and it pretty much dissolved the barnacles. Let the acid
stan
Mike said "Ablatives can generally be applied over hard paints."
That's the way it turned out but that was not what Interlux tech support
advised me. I bought the Micron CSC at the Binnacle...asked them the
same questionthey advised to remove the VC 17.
Difference experiences at differen
I use diluted Acid Magic (already very dilute hydrochloride) to remove
barnacle rings from my bronze prop and my PVC dinghy. Brush on, watch the
fizz, brush off.
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
On 18 November 2015 at 11:06, robert via CnC-List
wrote:
> David:
>
> I had some
All,
I am looking for someone to skipper The Office back from Bermuda around
June 18.
I have several qualified crew, but need to have a skipper with ocean/Great
Lakes experience. Unfortunately, this is not a paid position and you would
have to pay for your own transportation to Bermuda and from
blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px
#715FFA solid !important; padding-left:1ex !important; background-color:white
!important; } Anyone have link to the PS article on David Paine's 33-1 of 25
yrs ago?
Barbara L. Hickson
_
12 matches
Mail list logo
