Spencer,
The cap on the rudder should unscrew very easily. Mine spins easily once
the set screws are removed. It shouldn't need a wrench at all. If you
haven't lifted the rudder slightly to take the pressure off the donut, that
could be the cause.
Jake
Jake Brodersen
"Midnight Mistr
Congrats Dave. Looks like everything worked out well. I find it strange that
anyone would use epoxy to seal the keel joint. When mine was replaced the yard
used 3M 5200…lots of it. They probably used two or three large tubes of it.
The boat sat for a day or two before they finally torqued t
I thought I would let the list know about this experience and hopefully make
most of you jealous. I donated some sails to Seabags last fall and for that
get a free bag in return. I saw that they had some boat brand specific bags
for sale, but none from C&C. I talked to Carrie Fletcher about i
OK, I'm jealous. Glad you took the time to share a story about "great company"
service.
Chuck
Resolute
1990 C&C 34R
Broad Creek, Magothy River, Md
- Original Message -
From: "David Knecht via CnC-List"
To: "CnC CnC discussion list"
Sent: Saturday, January 24, 2015 9:51:48 AM
Mine was done with epoxy. It's easier to break loose, if necessary, than 5200.
The joint was finished with a layer of fiberglass cloth. No leaks, and you
can't even see the joint.
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
- Original Message -
Congrats Dave. Looks l
In my personal experience, I would STRONGLY advise against rebedding your
keel in epoxy.
In the spring of 2013, while exiting the channel from the Yacht Club into
Lake Ontario my 29-2 hit a "lump" of sand that a dredging contractor had
left in the middle of the channel. Boat was motoring at 5.5 kn
Hi Rich,
Things are evolving with respect to the City of Kingston reaching out to
help the Marine Museum, even if the city does not directly acquire the
land. However, that motion has to go before Council on the 27th, I believe.
This link to TV coverage explains some of that, for those who are
int
Some years ago the Admiral surprised me with a duffel made by our local
loft. She had them trim the bag with red/blue/red stripes to mimic a C&C
bootstripe.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
On Jan 24, 2015 7:51 AM, "David Knecht via CnC-List"
wrote:
> I thought I would let the list kno
I'm sure you already know, but the Blue white Red white Blue of the C&C boot
stripe mimics the international flag for the letter "C", hence their company
logo.
- Original Message -
From: "Dennis C. via CnC-List"
To: cnc-list@cnc-list.com, "David Knecht"
Sent: Saturday, January 24,
Are the set-screws doubled up? Maybe that's the problem. I discoverd that
the hard way on my shaft seal.
Josh Muckley
S/V Sea Hawk
1989 C&C 37+
Solomons, MD
On Jan 24, 2015 8:41 AM, "Jake Brodersen via CnC-List" <
cnc-list@cnc-list.com> wrote:
> Spencer,
>
>
>
> The cap on the rudder should uns
Si, si.
Wal
you wrote:
'm sure you already know, but the Blue white Red white Blue of the C&C boot
stripe mimics the international flag for the letter "C", hence their company
logo.
Signal Flag Letter C (Charlie)
___
Email address:
CnC-List@cnc-
Our boat doesn't have the red, just the blues.
Ohey! I could write a song...
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
On 24 January 2015 at 13:20, Wally Bryant via CnC-List <
cnc-list@cnc-list.com> wrote:
> Si, si.
>
> Wal
>
> you wrote:
>
>> 'm sure you already know, but the Blue wh
When I lost the hard drive on my laptop, I lost a lot of files - including a
wish list for books. I'm trying to recreate a portion of the list before the
local libraries have their annual sales of donated books.
One of the books on my list was an old fiction about an Americas Cup
challenge orga
Hanks, Douglas Jr.
Muskrat: A Surprise Bid for the America's Cup, 1987 (A local favorite
around the Chesapeake Bay. A group of "good ole boys" (spelled drunks)
from the Eastern Shore of Maryland mount an America's Cup campaign in
1987 and take it to Australia. MUSKRAT is
14 matches
Mail list logo
