2014 1:22 PM
To: cnc-list@cnc-list.com
Subject: Stus-List winterizing the PYI shaft seal
Practical Sailor recently posted a suggestion for winterizing the Dripless
PYI shaft seal. PS said to unclamp the SS rotor from the prop shaft so the
bellows could expand to its uncompressed state. I have never d
k Dziedzic
Subject: Re: Stus-List winterizing the PYI shaft seal
I would not do it, because you would have to get new set screws and reset it
in the spring. I am leaving mine intact.
Marek (in Ottawa)
-Original Message-
From: Eric Frank via CnC-List
Sent: Friday, October 17, 2014 1:21 PM
To
I don't touch mine.
Week/old/worn engine mounts can allow a week/old/worn/poorly adjusted
bellows to leak especially at high thrust periods (Tied to the dock,
towing, or changing from full reverse to full ahead).
You can often times finish the season or even extend a season or two by
simply snugg
.com
Subject: Re: Stus-List winterizing the PYI shaft seal
I'd call or email Fred at PYI. He also has a lot of YouTube videos.
Joel
On Fri, Oct 17, 2014 at 1:24 PM, Hoyt, Mike via CnC-List
mailto:cnc-list@cnc-list.com>> wrote:
Sounds like a lot of work just to get access to it.
-O
I would not do it, because you would have to get new set screws and reset it
in the spring. I am leaving mine intact.
Marek (in Ottawa)
-Original Message-
From: Eric Frank via CnC-List
Sent: Friday, October 17, 2014 1:21 PM
To: cnc-list@cnc-list.com
Subject: Stus-List winterizing the
Subject: Stus-List winterizing the PYI shaft seal
Practical Sailor recently posted a suggestion for winterizing the Dripless
PYI shaft seal. PS said to unclamp the SS rotor from the prop shaft so the
bellows could expand to its uncompressed state. I have never done this, and
with the recent discussion a
to:cnc-list-boun...@cnc-list.com] On Behalf Of Eric
> Frank via CnC-List
> Sent: Friday, October 17, 2014 2:22 PM
> To: cnc-list@cnc-list.com
> Subject: Stus-List winterizing the PYI shaft seal
>
> Practical Sailor recently posted a suggestion for winterizing the
> Dripless PYI
Sounds like a lot of work just to get access to it.
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Eric
Frank via CnC-List
Sent: Friday, October 17, 2014 2:22 PM
To: cnc-list@cnc-list.com
Subject: Stus-List winterizing the PYI shaft seal
Practical
Practical Sailor recently posted a suggestion for winterizing the Dripless PYI
shaft seal. PS said to unclamp the SS rotor from the prop shaft so the bellows
could expand to its uncompressed state. I have never done this, and with the
recent discussion about the set screws holding the rotor in
