MA
Please note: message attached
From: Martin DeYoung via CnC-List
To: "cnc-list@cnc-list.com"
Cc: Martin DeYoung
Subject: Re: Stus-List rebedding hatch
Date: Thu, 15 Oct 2015 23:21:02 +
Put Calypso in the same group of butyl tape after the over drill and epoxy fill
process. Fo
Paul
Fountain via CnC-List
Sent: Thursday, October 15, 2015 5:29 AM
To: cnc-list@cnc-list.com
Cc: Paul Fountain
Subject: Re: Stus-List rebedding hatch
I did ours, and butyl tape worked great. Had to over drill and fill the old
holes yes, also found cracks where the liner and deck met, which we
CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Richard N.
Bush via CnC-List
Sent: Thursday, October 15, 2015 10:11
To: cnc-list@cnc-list.com
Cc: Richard N. Bush
Subject: Re: Stus-List rebedding hatch
Where does re-bedding handrails (teak) fit into this discussion? Thanks
Ric
] On Behalf Of Joel Aronson
via CnC-List
Sent: Thursday, October 15, 2015 08:14
To: cnc-list@cnc-list.com
Cc: Joel Aronson
Subject: Stus-List rebedding hatch
All,
I'll be replacing the front hatch with a Lewmar hatch. Which sealant should I
use? Sikaflex, Lifecaulk, something else?
Thanks everyone! I'm ordering 2 rolls from Compass Marine. If anyone in
Annapolis needs one, let me know. I'll never use them both.
Joel
On Thu, Oct 15, 2015 at 11:55 AM, Monty Schumpert via CnC-List <
cnc-list@cnc-list.com> wrote:
> Joel,
> As many others, I used butyl tape from Compass Mari
Joel,
As many others, I used butyl tape from Compass Marine for the hatches on my
34+. I did the re-bed job two years ago and there have been no leaks.
Monty
Scandia
On Thu, Oct 15, 2015 at 8:14 AM, Joel Aronson via CnC-List <
cnc-list@cnc-list.com> wrote:
> All,
>
> I'll be replacing the front
sday, October 15, 2015 10:11 AM
To: cnc-list@cnc-list.com
Cc: Richard N. Bush
Subject: Re: Stus-List rebedding hatch
Where does re-bedding handrails (teak) fit into this discussion? Thanks
Richard
1985 C&C 37 CB; Ohio River, Mile 584;
Richard N. Bush
2950 Breckenridge Lane, Su
#x27;Joel Aronson' ; cnc-list
Cc: Ron Ricci
Sent: Thu, Oct 15, 2015 9:53 am
Subject: Re: Stus-List rebedding hatch
Joel,
I’ve used butyl tape for a deck hatch, baby stay track and pedestal guard deck
mount brackets. It did the job and remains pliable forever. The hardest part
of re
> the gelcoat adheres to the fiberglass. >
>
That would be the 3M 5200; definitely not for bedding. 3200 is essentially
Silicone; 4200 a bit more adhesive than LifeCaulk, but removable.
Tim
___
Email address:
CnC-List@cnc-list.com
To change your list
15, 2015 8:14 AM
To: cnc-list@cnc-list.com
Subject: Stus-List rebedding hatch
All,
I'll be replacing the front hatch with a Lewmar hatch. Which sealant should I
use? Sikaflex, Lifecaulk, something else?
I need to overdrill, epoxy and redrill the new screw holes, correct?
joint).
>
> Marek
> Ottawa, ON
>
> *From:* Tim Goodyear via CnC-List
> *Sent:* Thursday, October 15, 2015 8:42 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* Tim Goodyear
> *Subject:* Re: Stus-List rebedding hatch
>
> For a different opinion; 3M 4200... I used Li
>
> From: Tim Goodyear via CnC-List
> Sent: Thursday, October 15, 2015 8:42 AM
> To: cnc-list@cnc-list.com
> Cc: Tim Goodyear
> Subject: Re: Stus-List rebedding hatch
>
> For a different opinion; 3M 4200... I used Lifecaulk when replacing Mojito's
> hatches about
LifeSeal or butyl tape.
http://cncphotoalbum.com/technical/sealant_usage.htm
Dennis C.
On Thu, Oct 15, 2015 at 7:14 AM, Joel Aronson via CnC-List <
cnc-list@cnc-list.com> wrote:
> All,
>
> I'll be replacing the front hatch with a Lewmar hatch. Which sealant
> should I use? Sikaflex, Lifecaulk
From: Tim Goodyear via CnC-List
Sent: Thursday, October 15, 2015 8:42 AM
To: cnc-list@cnc-list.com
Cc: Tim Goodyear
Subject: Re: Stus-List rebedding hatch
For a different opinion; 3M 4200... I used Lifecaulk when replacing Mojito's
hatches about four years ago and it worked fine, but have
For a different opinion; 3M 4200... I used Lifecaulk when replacing
Mojito's hatches about four years ago and it worked fine, but have been
using 4200 for all deck hardware since on advice from a couple of yards.
Tim
C&C 35-3 Mojito
Branford, CT
On Thu, Oct 15, 2015 at 8:14 AM, Joel Aronson via
I'll be using butyl when re-installing my hardware and ports. Don't forget to
use a chamfer bit on your drilled holes.
Best,
Dave
1982 C&C 37 - Ronin
Sent from my iPad
> On Oct 15, 2015, at 08:14, Joel Aronson via CnC-List
> wrote:
>
> All,
>
> I'll be replacing the front hatch with a Lewma
better than the
Bomar’s I removed!
Paul Fountain
Perception II
C&C 33-II
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson
via CnC-List
Sent: Thursday, October 15, 2015 8:14 AM
To: cnc-list@cnc-list.com
Cc: Joel Aronson
Subject: Stus-List rebedding hatch
All,
I'll be replacing the front hatch with a Lewmar hatch. Which sealant
should I use? Sikaflex, Lifecaulk, something else?
I need to overdrill, epoxy and redrill the new screw holes, correct?
Joel
35/3
Annapolis
--
Joel
301 541 8551
___
Email a
18 matches
Mail list logo
