On the other hand, centering it looks better, makes it easier to tie
> up when folded, and probably makes it easier to climb into the cockpit.
>
> Cheers,
> Randy Stafford
> S/V Grenadine
> C&C 30-1 #7
> Ken Caryl, CO
>
> From: "Alan Zuas via CnC-List"
>
Well, there were witnesses... say no more! ;-)
Graham Collins
Secret Plans
C&C 35-III #11
On 2016-08-13 12:31 PM, Persuasion37 via CnC-List wrote:
I fail to see the problem with the ladder. You don't want riff raff getting
back on the boat.
My apologies to all mother in laws😜
Mike
PERSUASION
If you turn the rudder it moves completely out of the way. Even with the
rudder centered my ladder
does not touch it but is close.
Check the stern from the inside. There may be stiffening strip laminated
horizontally across that
provides a good location to bolt the ladder to.
Michael Brown
Wi
; 1994 C270 “Legato”
> Ottawa, ON
>
> Sent from Mail for Windows 10
>
> From: G Collins via CnC-List
> Sent: August 13, 2016 10:29
> To: cnc-list@cnc-list.com
> Cc: G Collins
> Subject: Re: Stus-List Boarding Ladder
>
> I will second the comments about ensur
The central location would also depend on if you have a split backstay or not.
With a split one, you want it central. It also, usually, makes the gate easier
to install.
Marek
Sent from Mail for Windows 10
From: RANDY via CnC-List___
This list is s
I fail to see the problem with the ladder. You don't want riff raff getting
back on the boat.
My apologies to all mother in laws😜
Mike
PERSUASION
C&C 37 K/CB
Long Sault
> On Aug 13, 2016, at 10:28 AM, G Collins via CnC-List
> wrote:
>
> I will second the comments about ensuring a good length
You want to have, at least, a good rung or two under water and a reasonable way
of clearing the pushpit. This applies to those of us who are not built like
Mark Spitz. Your Admiral will be thankful.
I know that it may sound funny, but one of the reasons why we changed boats was
the difficulty
I will second the comments about ensuring a good length of the ladder is
underwater when folded down - my mother-in-law fell into the water one time off
our previous boat, and could not get up the ladder - the lowest rung was barely
below the surface. After that debacle I invested in a lifeslin
-boun...@cnc-list.com] On Behalf Of RANDY via
CnC-List
Sent: Saturday, August 13, 2016 8:43 AM
To: cnc-list
Cc: RANDY ; Alan Zuas
Subject: Re: Stus-List Boarding Ladder
Hi Ali,
I have a 1972 C&C 30 Mk. I, hull #7, with a hinging swim ladder in the middle
of the transom. I don't
tradeoffs can be accomplished. Good luck.
Dave
Windstar 33-2
Message: 3
Date: Sat, 13 Aug 2016 05:29:51 + (UTC)
From: Alan Zuas
To: "cnc-list@cnc-list.com"
Subject: Stus-List Boarding Ladder
Message-ID:
<1506370095.15827889.1471066191875.javamail.ya...@mail.yahoo.com>
Co
bably makes it easier to climb into the cockpit.
Cheers,
Randy Stafford
S/V Grenadine
C&C 30-1 #7
Ken Caryl, CO
- Original Message -
From: "Alan Zuas via CnC-List"
To: "cnc-list"
Cc: "Alan Zuas"
Sent: Friday, August 12, 2016 11:29:51 PM
Subject
r, Maine
From: Danny Haughey via CnC-List
To: cnc-list@cnc-list.com
Cc: Danny Haughey
Sent: Saturday, August 13, 2016 8:28 AM
Subject: Re: Stus-List Boarding Ladder
I just looked at sailboat data. I see what you mean about the rudder.
You could certainly mount it to the side. Th
a similar project.
Danny
Sent from my T-Mobile 4G LTE Device
Original message From: Alan Zuas via CnC-List
Date: 8/13/16 1:29 AM (GMT-05:00) To:
cnc-list@cnc-list.com Cc: Alan Zuas Subject: Stus-List
Boarding Ladder
Hi,
I
am relatively new to sailing and the boat life
Hi,
I am relatively new to sailing and the boat life, and this is my first post
here. I have a C&C 30' 1976 and love the boat. I have been working on different
projects, and now I'd to install a boarding ladder on my boat. I looked around
the marina and noticed a lot of people have their ladde
uina
>
>
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Joe
> Della Barba via CnC-List
> *Sent:* Saturday, April 30, 2016 12:27
> *To:* cnc-list@cnc-list.com
> *Cc:* Joe Della Barba
> *Subject:* Re: Stus-List boarding ladder
>
>
&g
ist
*Sent:* Saturday, April 30, 2016 12:27
*To:* cnc-list@cnc-list.com
*Cc:* Joe Della Barba
*Subject:* Re: Stus-List boarding ladder
I am sending it back. I maybe should have looked more at the
measurements – it looks like it came from a 1/3 scale model!
It might be good for a RIB in the 14-16
+
Subject: Re: Stus-List boarding ladder
From: cnc-list@cnc-list.com
CC: joe.della.ba...@ssa.gov
Good news is the vendor has a 14 day return policy
J
Bad news is I cannot find the ladder I want *anywhere*, cheap or not! Did the
standard sailboat stern ladder become illegal or something
Of Joe Della
Barba via CnC-List
Sent: Saturday, April 30, 2016 12:27
To: cnc-list@cnc-list.com
Cc: Joe Della Barba
Subject: Re: Stus-List boarding ladder
I am sending it back. I maybe should have looked more at the measurements – it
looks like it came from a 1/3 scale model!
It might be good for a
cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> "
mailto:cnc-list@cnc-list.com> >
Cc: "Joe Della Barba" mailto:joe.della.ba...@ssa.gov>
>
Sent: Monday, April 25, 2016 7:57:45 AM
Subject: Stus-List boarding ladder
http://www.ebay.com/itm/4-STEPS-STAINLESS-STEE
List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass
via CnC-List
Sent: Monday, April 25, 2016 12:01
To: cnc-list@cnc-list.com
Cc: Rick Brass
Subject: Re: Stus-List boarding ladder
Joe;
I have a friend who has an EBay store, and we have talked about this seller a
couple of times.
Five Oc
she sees on the other boats, and we all know a captain
is below an admiral ;)
Joe
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of allen via
CnC-List
Sent: Monday, April 25, 2016 12:00
To: cnc-list@cnc-list.com
Cc: allen
Subject: Re: Stus-List boarding ladder
8 inches is
] On Behalf Of Della Barba,
Joe via CnC-List
Sent: Monday, April 25, 2016 9:01 AM
To: 'cnc-list@cnc-list.com'
Cc: Della Barba, Joe
Subject: Re: Stus-List boarding ladder
I ordered one. There are 3 left now.
Joe
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On
ubject: Re: Stus-List boarding ladder
I ordered one. There are 3 left now.
Joe
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S via
CnC-List
Sent: Monday, April 25, 2016 08:35
To: CNC boat owners, cnc-list
Cc: Chuck S
Subject: Re: Stus-List boarding ladd
I ordered one. There are 3 left now.
Joe
Coquina
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck S via
CnC-List
Sent: Monday, April 25, 2016 08:35
To: CNC boat owners, cnc-list
Cc: Chuck S
Subject: Re: Stus-List boarding ladder
Joe,
That's a great price on a l
Resolute
1990 C&C 34R
Broad Creek, Magothy River, Md
- Original Message -
From: "Joe via CnC-List Della Barba"
To: "cnc-list@cnc-list.com"
Cc: "Joe Della Barba"
Sent: Monday, April 25, 2016 7:57:45 AM
Subject: Stus-List boarding ladder
http://www.ebay.com/itm/4-STEPS-STAINLESS-STEEL-BOARDING-STERN-TRANSOM-MOUNT-BOAT-LADDER-FIVE-OCEANS-/281812641478?hash=item419d57a6c6:g:9GEAAOSwsB9WCfcn&vxp=mtr
Does anyone know how these work? Does the bottom freely hinge back and forth or
can it only fold down until it is in a straight line?
J
26 matches
Mail list logo
