3 Mk II K/CB
>> Port Elgin, ON
>>
>> -Original Message----- From: Adrian Humphreys via CnC-List
>> Sent: Thursday, June 13, 2019 6:16 PM
>> To: cnc-list@cnc-list.com
>> Cc: Adrian Humphreys
>> Subject: Re: Stus-List Worn stanchion base sockets
>>
s a centimeter
> or so to make the life lines fit better. Hmmm
>
> Tom S
>
> C&C 33 Mk II K/CB
> Port Elgin, ON
>
> -Original Message- From: Adrian Humphreys via CnC-List
> Sent: Thursday, June 13, 2019 6:16 PM
> To: cnc-list@cnc-list.com
> Cc: Adri
Hmmm
Tom S
C&C 33 Mk II K/CB
Port Elgin, ON
-Original Message-
From: Adrian Humphreys via CnC-List
Sent: Thursday, June 13, 2019 6:16 PM
To: cnc-list@cnc-list.com
Cc: Adrian Humphreys
Subject: Re: Stus-List Worn stanchion base sockets
I followed Mike and Bill's advice.
85
Thanks for sharing. I'm gonna try that method.
Chuck S
> On June 13, 2019 at 6:16 PM Adrian Humphreys via CnC-List
> wrote:
>
>
> I followed Mike and Bill's advice.
>
> 85 cents for a 2 litre bottle of soda pop,
> poured out the beverage,
> cut the bottle into 1-7/8 x 3 inch strips (notc
I followed Mike and Bill's advice.
85 cents for a 2 litre bottle of soda pop,
poured out the beverage,
cut the bottle into 1-7/8 x 3 inch strips (notched for the set screw),
sleeved the sockets (lubed with dish soap),
replaced the stanchions.
Eh voila!
Stanchions are tight and the admiral fee
Rose
Subject: Re: Stus-List Worn stanchion base sockets
Adrian,
I read a trick many years ago, but have not tried it myself. Cut a strip from a
2-liter bottle and sleeve the stanchion base. I would do it to not interfere
with the set screw.
Mike
s/v Shannon Rose
C&C 39
Ma
Sent: Tuesday, April 2, 2019 9:48 AM
To: Robert Boyer via CnC-List
Cc: Adrian Humphreys
Subject: Stus-List Worn stanchion base sockets
The stanchions are loose in the worn sockets of the plastic stanchion bases.
Before I order eight new ones, I'm wondering if anyone has tried filling
the so
C&C 32, FoxFire
Rock Hall, MD
Neil Andersen
20691 Jamieson Rd
Rock Hall, MD 21661
From: CnC-List on behalf of Adrian Humphreys
via CnC-List
Sent: Tuesday, April 2, 2019 9:48 AM
To: Robert Boyer via CnC-List
Cc: Adrian Humphreys
Subject: Stus-List Worn s
The stanchions are loose in the worn sockets of the plastic stanchion bases.
Before I order eight new ones, I'm wondering if anyone has tried filling the
socket with epoxy and either setting the stanchion in the wet epoxy, or letting
the epoxy set and re-drilling for the stanchion?
Thanks,
Adr
