ree days.
Joe Della Barba
From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On
Behalf Of Damien Morrissey
Sent: Monday, September 24, 2012 2:58 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Tranny Question
OK - thanks to all those who posted solutions to a problem regard
Thanks Rich, Joel, Chuck, Dennis C., and Joe BB. for the suggestions to my
possible transmission issues related to loss of power when in gear.
I now have a few things to check on the weekend. I also checked with the
Moyer Forum as Joe BB suggested.
I will let you know when I solve the problem.
to:cnc-list-boun...@cnc-list.com] On
Behalf Of Rich Knowles
Sent: Thursday, September 13, 2012 7:50 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Tranny Question - Atomic 4
Damien: ALWAYS Fully engage the shifter in both directions and make sure your
throttle is off and the engine has dropped t
It may be the clutch plates are loose. Pull the plate off the top of the tranny
and adjust them. Consult an AT4 manual to see exactly how to do it.
Dennis C.
Touché 35-1 #83
Mandeville, LA
Sent from my iPhone
On Sep 13, 2012, at 6:34 AM, Damien Morrissey
wrote:
> I have a tranny question ab
quot;
To: cnc-list@cnc-list.com
Sent: Thursday, September 13, 2012 7:34:15 AM
Subject: Stus-List Tranny Question - Atomic 4
I have a tranny question about my 1974 Viking 33 with the Atomic 4. When you
move the gear shifter up for forward or down for reverse, there seems to be a
long throw of the
Damien,
The problem may be in the shift cable, not the transmission. Be sure that
there is nothing below interfering with it. You might want to disconnect
the cable at the transmission and move the lever to see if it moves freely.
Joel
35/3
The Office
Annapolis
On Thu, Sep 13, 2012 at 7:49 AM,
Damien: ALWAYS Fully engage the shifter in both directions and make sure your
throttle is off and the engine has dropped to idle before shifting.
The stalling is a bit harder to answer, not knowing any details about your boat
or it's gear. I suggest you take a close look at your shaft inside th
I have a tranny question about my 1974 Viking 33 with the Atomic 4. When
you move the gear shifter up for forward or down for reverse, there seems
to be a long throw of the shifter, almost like it varies the amount of
forward or reverse propulsion – then I can apply throttle for speed. Is
this r
