Graham,
Girlfriends grandmother was there, but recently passed. 99 yrs old she had a
good run and was ready. Florence Chisholm.
All have a patient who managed the facility - she saw some photos I had taken
around the province in my clinic and asked if they could get copies. In the end
they have
If the valves all move that is great. What sort are they? The issue I
had was that mine are the tapered plug type, and a couple were worn
enough that they leaked. The temporary fix was to put a grease fitting
on the drain plug holes and crank some grease in, the longer term fix
was to re-mach
I was thinking the same thing.
Hopefully its in good shape. Not expecting I'd want to try and change it out my
first time while its in the water! But a quick haul is not that bad.
And I've wondered about the thru hull valves - exercised them all back and
forth a few times. They 'seem' OK, and t
ood luck,
Chuck
Resolute
1990 C&C 34R
Atlantic City, NJ
- Original Message -
From: "CNC boat owners, cnc-list"
To: "CNC boat owners, cnc-list"
Sent: Friday, May 2, 2014 2:15:11 PM
Subject: Stus-List Spring prep
This spring is challenging - the weathe
I'd leave it alone without reason to change it. My boat had been on the
hard a while before launch, stuffing box was fine. The valves on the
thru-hulls on the other hand
Graham Collins
Secret Plans
C&C 35-III #11
On 2014-05-02 3:15 PM, M Bod via CnC-List wrote:
This spring is challengin
02, 2014 2:15 PM
To: C&C list
Subject: Stus-List Spring prep
This spring is challenging - the weather is just starting to warm up.
Hopefully this weekend I can strip off the boat cover, get the boat paint
done, quick polish/wax topsides and do some initial interior cleaning on the
new
If it ain't broke don't fix it. Are you sure it needs attention?
-Original Message-
From: "M Bod via CnC-List"
Sent: 2014-05-02 2:15 PM
To: "C&C list"
Subject: Stus-List Spring prep
This spring is challenging - the weather is just starting to warm
This spring is challenging - the weather is just starting to warm up. Hopefully
this weekend I can strip off the boat cover, get the boat paint done, quick
polish/wax topsides and do some initial interior cleaning on the new boat.
Target is to splash Friday next week. Bit of a challenge because
