Issue solved. Turns out when I updated the chart plotter, it disabled that
instrument. I turned them back on and all is good.
Something to keep in mind when doing updates.
Bob
> On 04/26/2022 10:41 AM Joel Aronson via CnC-List
> wrote:
>
>
> The transducer is made by Airmar in New
The transducer is made by Airmar in New Hampshire. Airmar is owned by
Gemeco. You might contact their tech support. I've had the temp fail on
that model, but not all 3. the warranty is 2 years from manufacture, not
install. Sorry!
On Tue, Apr 26, 2022 at 10:37 AM ALAN BERGEN via CnC-List <
cn
It could be the transducer, or it could be the display. If you know someone
with B&G instruments, remove your display and connect it to the other
person's instruments. If it still doesn't work, it's the display. if it
does, it's the transducer. Usually when the transducer paddle wheel isn't
clean,
Mine is different. TackTick. It works through a magic box that talks to the
other devices. That box requires 12vdc, and the displays are all wireless.
Thought you might have a device/translator in the system that is required to
read the signal.
Chuck S
> On 04/26/2022 9:53 AM Bob Ma
As detailed as I try to be, I know some pertinent information will be left off.
Such as the anemometer information still appears on my displays so I ruled out
the network backbone. I plugged the transducer cable into the opposite end of
the network and still just dashes. It's tri-data so dept
Mine shorted out last year, was a random occurrence. Had to replace all is
well again.
Sent from my iPhone
> On Apr 26, 2022, at 9:44 AM, CHARLES SCHEAFFER via CnC-List
> wrote:
>
>
> Three dashes mean, "no-signal". Check all your wire connections and make
> sure the power and ground wi
Three dashes mean, "no-signal". Check all your wire connections and make sure
the power and ground wires are clean and tight too. Something is probably
loose.
Chuck S
> On 04/26/2022 7:34 AM Bob Mann via CnC-List wrote:
>
>
> My speed/depth/temp thru-hull is now showing dashes inst
Have you posed this to the B&G group on Facebook?
Bill Coleman
On Tue, Apr 26, 2022, 07:51 Edd Schillay via CnC-List
wrote:
> Bob,
>
> Is the boat in the water? If so, pull the transducer and clean it /clear
> it thoroughly.
>
> I didn’t have B&G, but that solution worked well on my old Raymari
Bob,
Is the boat in the water? If so, pull the transducer and clean it /clear it
thoroughly.
I didn’t have B&G, but that solution worked well on my old Raymarine system.
All the best,
Edd
———-
Edd M. Schillay
Captain of the “Starship Enterprise”
Bayliner 3788 | NCC-1701-C
Venic
