Re: Stus-List Masthead sheaves C&C 37+

@cnc-list.com Cc: Josh Muckley Subject: Re: Stus-List Masthead sheaves C&C 37+ I didn't spend much time comparing resources and references so take it for what it's worth but the website below did some tests and found the bowline reduced strength by ~60% where as the double fish kno

Re: Stus-List Masthead sheaves C&C 37+

, NC > > > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Patrick > Davin via CnC-List > *Sent:* Thursday, February 1, 2018 6:02 PM > *To:* cnc-list@cnc-list.com > *Cc:* Patrick Davin > *Subject:* Re: Stus-List Masthead she

Re: Stus-List Masthead sheaves C&C 37+

PM To: cnc-list@cnc-list.com Cc: Patrick Davin Subject: Re: Stus-List Masthead sheaves C&C 37+ I couldn't help but chuckle that Jeanneau owners are claiming to have invented / named this knot. It's just the halyard hitch with a different finish. So perhaps it should be called

Re: Stus-List Masthead sheaves C&C 37+

ord via CnC-List" < cnc-list@cnc-list.com> wrote: Nice knot. If you’re going to go that route, why not just tie a bowline? *From:* Jim Giffing via CnC-List *Sent:* Thursday, February 01, 2018 3:29 PM *To:* cnc-list@cnc-list.com *Cc:* Jim Giffing *Subject:* Stus-List Masthead sheaves

Re: Stus-List Masthead sheaves C&C 37+

> S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > > On Feb 1, 2018 4:07 PM, "Matthew L. Wolford via CnC-List" > wrote: > Nice knot. If you’re going to go that route, why not just tie a bowline? > > From: Jim Giffing via CnC-List > Sent: Thursday, Febru

Re: Stus-List Masthead sheaves C&C 37+

t;> Josh Muckley >> S/V Sea Hawk >> 1989 C&C 37+ >> Solomons, MD >> >> On Feb 1, 2018 4:07 PM, "Matthew L. Wolford via CnC-List" < >> cnc-list@cnc-list.com> wrote: >> >> Nice knot. If you’re going to go that route, why not

Re: Stus-List Masthead sheaves C&C 37+

gt; Nice knot. If you’re going to go that route, why not just tie a bowline? > > *From:* Jim Giffing via CnC-List > *Sent:* Thursday, February 01, 2018 3:29 PM > *To:* cnc-list@cnc-list.com > *Cc:* Jim Giffing > *Subject:* Stus-List Masthead sheaves C&C 37+ > > One thing

Re: Stus-List Masthead sheaves C&C 37+

I couldn't help but chuckle that Jeanneau owners are claiming to have invented / named this knot. It's just the halyard hitch with a different finish. So perhaps it should be called halyard hitch, Jeanneau variant? I use the standard halyard hitch which ends with the tail up: https://www.netknots

Re: Stus-List Masthead sheaves C&C 37+

.com> wrote: Nice knot. If you’re going to go that route, why not just tie a bowline? *From:* Jim Giffing via CnC-List *Sent:* Thursday, February 01, 2018 3:29 PM *To:* cnc-list@cnc-list.com *Cc:* Jim Giffing *Subject:* Stus-List Masthead sheaves C&C 37+ One thing to consider about sh

Stus-List Masthead sheaves C&C 37+

Everyone has their favorite knots and they all have their merits, so if your happy with your arrangement stay with it. The reasons why I like this Jeanneau Halyard knot is that it won't untie it's self as Joel pointed out and because the bitter end is away from the sheave and not likely to foul wh

Re: Stus-List Masthead sheaves C&C 37+

, February 01, 2018 3:29 PM > *To:* cnc-list@cnc-list.com > *Cc:* Jim Giffing > *Subject:* Stus-List Masthead sheaves C&C 37+ > > One thing to consider about sheave sizes which I did not think about when > I replaced my halyards... don't forget to allow for the eidth of

Re: Stus-List Masthead sheaves C&C 37+

Nice knot. If you’re going to go that route, why not just tie a bowline? From: Jim Giffing via CnC-List Sent: Thursday, February 01, 2018 3:29 PM To: cnc-list@cnc-list.com Cc: Jim Giffing Subject: Stus-List Masthead sheaves C&C 37+ One thing to consider about sheave sizes which I did

Re: Stus-List Masthead sheaves C&C 37+

Yeah Jim that was one of the factors I was considering in my future-proof approach. I thought it would be a stretch to think that I would go up to 5/8ths or really even 1/2 but the core to core eye splice was definitely in the consideration. Like you, I have elected to use a knot. I prefer the d

Re: Stus-List Masthead sheaves C&C 37+

Jim, I starting using it a couple years ago. The only way to undo it is with a knife, but that's a good thing with a halyard! Joel Virus-free. www.avg.com

Stus-List Masthead sheaves C&C 37+

One thing to consider about sheave sizes which I did not think about when I replaced my halyards... don't forget to allow for the eidth of your line due to your eye splice for your halyard shackle. It obviously makes the line much thicker and makes it harder to hoist the last 8"-12" or so of the ha

Re: Stus-List Masthead sheaves C&C 37+

might be cause for >> some concern, but it would be the long term damage from being repeatedly >> flattened and reshaped as the line runs over the sheave. >> >> >> >> Jake >> >> >> >> *Jake Brodersen* >> >> *C&C 35 Mk-III “Midnight

Re: Stus-List Masthead sheaves C&C 37+

sheave. >> >> >> >> Jake >> >> >> >> *Jake Brodersen* >> >> *C&C 35 Mk-III “Midnight Mistress”* >> >> *Hampton VA* >> >> [image: cid:image001.png@01D2F43E.567E4070] >> >> >> >> >>

Re: Stus-List Masthead sheaves C&C 37+

”* > > *Hampton VA* > > [image: cid:image001.png@01D2F43E.567E4070] > > > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Josh > Muckley via CnC-List > *Sent:* Monday, January 22, 2018 21:42 > *To:* C&C List &

Re: Stus-List Masthead sheaves C&C 37+

@cnc-list.com] On Behalf Of Josh Muckley via CnC-List Sent: Monday, January 22, 2018 21:42 To: C&C List Cc: Josh Muckley Subject: Re: Stus-List Masthead sheaves C&C 37+ Halyard stopper? What's that? Haha, no really what's that? Stopper balls? Or jammers? You're ri

Re: Stus-List Masthead sheaves C&C 37+

*C&C 35 Mk-III “Midnight Mistress”* > > *Hampton VA* > > [image: cid:image001.png@01D2F43E.567E4070] > > > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Josh > Muckley via CnC-List > *Sent:* Monday, January 22, 2018 15:1

Re: Stus-List Masthead sheaves C&C 37+

2018 15:17 To: C&C List Cc: Josh Muckley Subject: Stus-List Masthead sheaves C&C 37+ I have a new problem for the collective wisdom. I'm getting the masthead sheaves re-made by Ed at Zephyrwerks. He made my boom end sheaves 2 years ago and did a great job. I have a 1/2"

Re: Stus-List Masthead sheaves C&C 37+

877-0369 <mailto:ron.ri...@1968.usna.com> ron.ri...@1968.usna.com From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley via CnC-List Sent: Monday, January 22, 2018 3:17 PM To: C&C List Cc: Josh Muckley Subject: Stus-List Masthead sheaves C&C 37+ I

Stus-List Masthead sheaves C&C 37+

I have a new problem for the collective wisdom. I'm getting the masthead sheaves re-made by Ed at Zephyrwerks. He made my boom end sheaves 2 years ago and did a great job. I have a 1/2" wide sheave box for 3 sheaves. He cut them with a slight relief and cut the groove for a 1/2" line. I had to