If you're a little more DIY, you can buy 3x of these:
https://www.ledsupply.com/leds/cree-xlamp-xm-l2-leds
and one of these at 1000ma
https://www.ledsupply.com/led-drivers/buckblock-dc-led-driver
Hook them up, the result is a nice warm light, with ample brightness, and 1
amp power draw.
They are
I replaced each fixture with a pair of these:
https://www.superbrightleds.com/moreinfo/swivel-led/135-swivel-utility-led-light-bar-with-rocker-switch/1434/4518/#/attributes/10854
They were not available in the warm color so I got the "natural" color
which was fairly harsh.
On Tue, Oct 10, 2017 at
The marine beam option is what I went with. The boat came with more than a
dozen tube fixtures (most of which were double tubes) and at ~$30 a tube it
wasn't cheap. For the most part they are plug and play though the
directions do suggest bypassing the ballast/starter circuit. I didn't
bypass an
Brodersen
C&C 35 Mk-III “Midnight Mistress”
Hampton VA
Date: Sun, 8 Oct 2017 15:35:41 +
From: kelly petew mailto:kellype...@msn.com> >
To: cnc-list mailto:cnc-list@cnc-list.com> >
Subject: Stus-List LED Interior Flourescent replace
Subject: Stus-List LED Interior Flourescent replacements
I didn’t use replacement tube because the old fluorescent fixtures were going
off rather than the bulbs. The fixtures were all behind a translucent panels.
So, I pulled out the old fixtures and hard wired LED strip lights. I used two
o: cnc-list@cnc-list.com
> Cc: Jim Reinardy
> Subject: Re: Stus-List LED Interior Flourescent replacements
>
> Doug,
>
>
>
> Are those dimmable? It does not say in the write online at least.
>
>
>
> Thanks,
>
>
>
> Jim Reinardy
>
> C&
: Re:
Stus-List LED Interior Flourescent replacements
Doug, Are those dimmable? It does not say in the write online at least.
Thanks, Jim ReinardyC&C 30-2 “Firewater”Milwaukee From: CnC-List
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of svpegasus38 via CnC-List
Sent: Sunday, Octobe
@cnc-list.com
Cc: svpegasus38
Subject: Re: Stus-List LED Interior Flourescent replacements
I replaced a couple of fluorescent tubes with the Marine beam led tubes. Had to
eliminate the ballast from the system. There is instructions either online or
included with the led tubes (can't
becca Leah LF39
Original message From: kelly petew via CnC-List
Date: 10/8/17 08:35 (GMT-08:00) To: cnc-list
Cc: kelly petew Subject: Stus-List
LED Interior Flourescent replacements
Anyone have any experiences to share with replacing your original fluorescents
with LEDs?
elly petew
> To: cnc-list
> Subject: Stus-List LED Interior Flourescent replacements
> Message-ID:
>
>
>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Anyone have any experiences to share with replacing your original
> fluorescents with LEDs?
I haven't replaced mine because I believe the benefit is marginal.
Incandescent to LED is a big power saving. Fluorescent to LED is not. I
also don't use my two fluorescent fixtures that much, dinette and head. If
I decide to replace, I'll buy these:
http://store.marinebeam.com/fluorescent-styl
Anyone have any experiences to share with replacing your original fluorescents
with LEDs?
Is it simply 'plug & play', i.e., old tube out, new LED tube into the existing
fixture??
Thanks!!
Pete W.
Siren Song
'91 C&C 30-2
Deltaville, Va.
___
The
12 matches
Mail list logo
