Hi I use 65 ft 1/2" genoa sheets which seem to work well. I tried 5/8 one year but found them to heavy and went back to 1/2".
Bill Bruce
Landfall 38
___
Thanks everyone for supporting this list with your contributions. Each an
7:08 PM
To: cnc-list@cnc-list.com
Cc: Shawn Wright
Subject: Re: Stus-List Genoa sheets for Landfall 38
Regarding genoa/jib sheets: is it acceptable to use one double length sheet,
marked in the middle, then looped through the clew? I will need to replace the
sheets on our new 35 as they are t
Just did 41lf of for my 37 perfect spec called for 60 ft ? I Did 12mm VPC
nicer feel than the 1/2” well for me any who
John Conklin
S/V Halcyon
On Apr 22, 2019, at 6:25 PM, schiller via CnC-List
mailto:cnc-list@cnc-list.com>> wrote:
Check the Cajun Ropes site. If they have your model, they
Regarding genoa/jib sheets: is it acceptable to use one double length
sheet, marked in the middle, then looped through the clew? I will need to
replace the sheets on our new 35 as they are too large, and the knots are
also bulky as result. It seemed to me that a single sheet looped through
would so
Check the Cajun Ropes site. If they have your model, they will have
lengths. If you don't want to mess with lines, order from them. I have
been pleased with the set I bought last year.
Neil Schiller
1983 C&C 35-3, #028, "Grace"
Whitehall, Michigan
WLYC
Splash date: 5/3
On 4/22/2019 6:15 PM,
Hi,
I’m looking to replace old genoa sheets, and I forgot to measure the lengths of
current sheets. I recall a rule of thumb being that sheets should be 1.25 -
1.5 times the boat length. Any LF38 owners recall the lengths of their sheets?
-
Paul E.
1981 C&C Landfall 38
S/V Johanna Rose
For
