un...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com]
On Behalf Of Joel Aronson
Sent: Friday, July 20, 2012 7:44 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Cockpit Locker Latches
I've used the push button type on a Beneteau. They work well.
Joel
On Fri, Jul 20, 2012 a
Have fun drilling holes in your boat:)
Rich
(mobile)
On 2012-07-20, at 20:40, Tim Goodyear wrote:
Thanks, my last boat had those, and they worked fine, but some of the routing
on those lines could be more trouble than new latches on my boat. I'm going to
try the push button latches from WM,
I've used the push button type on a Beneteau. They work well.
Joel
On Fri, Jul 20, 2012 at 7:40 PM, Tim Goodyear wrote:
> Thanks, my last boat had those, and they worked fine, but some of the
> routing on those lines could be more trouble than new latches on my boat.
> I'm going to try the pus
Thanks, my last boat had those, and they worked fine, but some of the routing
on those lines could be more trouble than new latches on my boat. I'm going to
try the push button latches from WM, and see how they fit. About a 3/4" hole
in the cockpit side, so I hope it's good...
Tim
On Jul 20,
That may have been me. Lines from the underside of the lids around small under
deck pulleys through holes in the bulkhead to cleats inside the cabin. Lower
the lids, pull the lines tight and cleat them off. Locked!
Rich
(mobile)
On 2012-07-20, at 18:40, "Dennis C." wrote:
Tim,
Someone on th
Tim,
Someone on the list, past or present, had a locker latch system that released
from the cabin by pulling on a line. Perhaps they're still lurking?
Dennis C.
Sent from my iPhone
On Jul 20, 2012, at 1:40 PM, Joel Aronson wrote:
> Might be something here you can use:
>
> http://www.marinep
Might be something here you can use:
http://www.marinepartdepot.com/dring.html
Sounds like a great week. Fair winds!
Joel
On Fri, Jul 20, 2012 at 12:56 PM, Tim Goodyear wrote:
> My race crew have been complaining that Mojito's cockpit locker hasps bite
> their shins a little more than they c
My race crew have been complaining that Mojito's cockpit locker hasps bite
their shins a little more than they care for. I have basic locking hasps
installed on the locker lid and cockpit sides. Has anyone had any success
with flush mount latches? I can't quite remember the geometry of how the
l
