p;C 38 mk 2
la Belle Aurore C&C 25 mk1
Washington, NC
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C.
via CnC-List
Sent: Friday, October 24, 2014 12:17 PM
To: Robert Abbott; cnc-list@cnc-list.com
Subject: Re: Stus-List C&C sm
cnc-list@cnc-list.com; 'Dan Mccorison'; 'Bill Bina'
Subject: Re: Stus-List C&C smile fix - how I did it
And if you are in the northern climate and are pulling the boat out for the
winter, add a garboard drain plug to let water out of the bildge before it
freezes and causes
iday, October 24, 2014 9:26 AM
To: Dan Mccorison; cnc-list@cnc-list.com; Bill Bina
Subject: Stus-List C&C smile fix - how I did it
Dan:
Congratulations on your new boat and welcome to the C&C list. Just about
anything you need advice on, you can get it here.
In my opinion, Bill Bina has provi
Hi, Dan — welcome to the best place on the planet for owners of vintage C&C’s!
Stu has done us all a great service in taking over this list-serve since
SailNet and its old chat groups went under several years back.
I’m also on the Big Lake, but a little further east of you. Haul-out Monday…
Rob I sail from Duluth, Mn. Looking forward to asking questions, I'm sure I'll
have a lot of them. Thanks for the nice welcome.
Sent from my iPhone
> On Oct 24, 2014, at 11:17 AM, "Dennis C. via CnC-List"
> wrote:
>
> Ditto. Key is torquing the keelbolts.
>
> Pictures of Touché's smile are
Ditto. Key is torquing the keelbolts.
Pictures of Touché's smile are on the C&C photo album DIY section. Fix was
1999. No issue since
Dennis C.
Touché 35-1 #83
Mandeville, LA
Sent from my iPhone
> On Oct 24, 2014, at 8:26 AM, Robert Abbott via CnC-List
> wrote:
>
> Dan:
>
> Congratulatio
-list.com; Bill Bina
Subject: Stus-List C&C smile fix - how I did it
Dan:
Congratulations on your new boat and welcome to the C&C list. Just about
anything you need advice on, you can get it here.
In my opinion, Bill Bina has provided you with one of the best methods
to deal with the 'C&
list-boun...@cnc-list.com] On Behalf Of Robert
Abbott via CnC-List
Sent: Friday, October 24, 2014 9:26 AM
To: Dan Mccorison; cnc-list@cnc-list.com; Bill Bina
Subject: Stus-List C&C smile fix - how I did it
Dan:
Congratulations on your new boat and welcome to the C&C list. Just about
anyth
Dan:
Congratulations on your new boat and welcome to the C&C list. Just about
anything you need advice on, you can get it here.
In my opinion, Bill Bina has provided you with one of the best methods
to deal with the 'C&C smile'. It is pretty much the way we dealt with
ours when we acquired
Thanks bill
Sent from my iPhone
> On Oct 24, 2014, at 5:46 AM, Bill Bina via CnC-List
> wrote:
>
> I fixed mine about 10 years ago and it has remained completely fixed, despite
> a few incidents of groundings. I cleaned out the joint mostly by using a wire
> wheel chucked in a drill. That du
I fixed mine about 10 years ago and it has remained completely fixed,
despite a few incidents of groundings. I cleaned out the joint mostly by
using a wire wheel chucked in a drill. That dug a channel all the way
along the length of the joint on both sides and around the leading edge.
Then re-
11 matches
Mail list logo
