Stus-List C&C 37 Rudder post assembly

Hi all; I am in need the collective wisdom of the group for a rudder issue; my boat (1985 C&C 37 CB) has been sitting on a trailer since early September for repairs to the hull, not rudder related; sometime in the past week the rudder has dropped a full two plus inches and no one knows how this

Stus-List C&C 37 for sale NC

Preliminary notification. I am preparing my C&C 37 for sale…😢 Recently sold my home on water while market was hot, but kept the slip I own, and My C&C37 ! With no home base, admiral says it's time for an upgrade to a more live aboard 40 ish cruising boat. This will be an amazing deal for someo

Stus-List C&C 37 foot block

I would like to upgrade the foot blocks by my primary winches from single to stacked doubles. Anyone have a source for original pieces that aren’t needed anymore? I’m also looking at new, but I don’t need them that bad. Thanks, Pete 1984 C&C 37 Please show your appreciation for

Stus-List C&C 37+ PSS

Hi Can anyone confirm the size of the shaft tube 37+? I know the shaft is 1 1/8 . Looking to replace this year. -Rob Sent from my iPhone Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/st

Stus-List C&C 37+ Edson chain and wire spec

Hi, It's time to replace the steering cable on my C&C37+ I called Edson and they do not have the specs for the 37+. They said to find the chain length and wire length and diameter in order to pick the right kit. I would like to have the new part in hand before I pull out the old one. Does a

Stus-List C&C 37/40R for sale

A friend of mine who sails with me on my C&C 29-1 has seen this boat and may be interested. Anyone got any comments to make that would be helpful to him. He's here in San Francisco and the boat is in BC so that's one problem 1989 C&C 40R Plus 37R Racer/Cruiser for sale - YachtWorld

Stus-List C&C 37 Owners Manual

Thanks everyone for assistance in helping a fellow owner find the manual he was looking for. Stay safe ‘n’ healthy StuThanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution --

Stus-List C&C 37 Owners Manual

Does anybody know if C&C produced an Owners Manual for the 37ft model(s)? Stay safe & healthy StuThanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal

Stus-List C&C 37/40+ For Sale -- Massive Price Drop

Listers, With my sights set on the next Enterprise and new adventures on the final frontier, I have dropped the price of my 1990 C&C 37/40+. Lots of great features, including new air conditioning, a Doyle Stack Pack, autopilot, Raymarine e95 chartplotter and a 2015 Beta 30 engine with just und

Re: Stus-List C&C 37+ Mast Head Light

We have an XL so the mast was built by Offshore Spars. Our mast had this Anchor Light from the factory: https://photos.app.goo.gl/7vdD6LvEpCYKMuD78 We have since replaced it with an Aqua Signal LED combined TriColour / Anchor Light. Ken H. On Mon, 10 Aug 2020 at 09:43, Josh Muckley via CnC-List

Re: Stus-List C&C 37+ Mast Head Light

You're welcome! Just be careful, I've heard some people have Hella lights not aqua signal. I don't know if the Hella lights are aftermarket or not. Josh On Mon, Aug 10, 2020, 08:36 Rob Hamlin wrote: > Great info thanks Josh > > Sent from my iPhone > > On Aug 9, 2020, at 10:04 PM, Josh Muckley

Re: Stus-List C&C 37+ Mast Head Light

Great info thanks Josh Sent from my iPhone > On Aug 9, 2020, at 10:04 PM, Josh Muckley via CnC-List > wrote: > >  > My original lights were all Aqua Signal Series 40. > > On my boat. The original tri-color and anchor light were all in a single > masthead unit. > https://www.amazon.com/

Re: Stus-List C&C 37+ Mast Head Light

My original lights were all Aqua Signal Series 40. On my boat. The original tri-color and anchor light were all in a single masthead unit. https://www.amazon.com/dp/B002IVAHW0/ref=cm_sw_r_apa_i_wCkmFbVDBV65Y I replaced with 2 different LED bulbs. Tri-color: https://store.marinebeam.com/indexed-b

Re: Stus-List C&C 37+ Mast Head Light

Ha ha, been there! No genius here! Sent from my iPad > On Aug 9, 2020, at 17:07, Rob Hamlin via CnC-List > wrote: > > Hi > To avoid two trips up the stick, know of a replacement LED bulb in kind for > the mast head light? > > Thanks > Rob > > > Sent from my iPhone > ___

Re: Stus-List C&C 37+ Mast Head Light

Depends on the socket that's up there. Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR On Sun, Aug 9, 2020 at 5:07 PM Rob Hamlin via CnC-List < cnc-list@cnc-list.com> wrote: > Hi > To avoid two trips up the stick, know of a replacement LED bulb in kind > for the mast head light? > > Th

Stus-List C&C 37+ Mast Head Light

Hi To avoid two trips up the stick, know of a replacement LED bulb in kind for the mast head light? Thanks Rob Sent from my iPhone ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. I

Stus-List C&C 37+ (or XL or R) Windlass Install

Date: Tue, 28 Jul 2020 16:20:34 -0400 From: rockland bazemore To: cnc-list@cnc-list.com Subject: Re: Stus-List C&C 37+ (or XL or R) Windlass Install Message-ID: Content-Type: text/plain; charset="utf-8" I would also like to see these thanks Chris! Rockland Bazemore S/

Re: Stus-List C&C 37+ (or XL or R) Windlass Install

I've seen several installations that used a vertical windlass that straddled the front bulkhead so that the motor was in the v-berth and then covered up. Not sure if this is possible on the 37/40. Chris's seems cleaner hidden below but might be useful to have that extra drum on the foredeck. Rockl

Re: Stus-List C&C 37+ (or XL or R) Windlass Install

https://photos.app.goo.gl/Mvou6UnYunf9NKJA6 ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/

Re: Stus-List C&C 37+ (or XL or R) Windlass Install

I would also like to see these thanks Chris! Rockland Bazemore S/V Blue Pearl C&C 37/40+ Port Washington, NY ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the

Re: Stus-List C&C 37+ (or XL or R) Windlass Install

I have a vertical Maxwell 800 mounted on a plate glassed in below the anchor locker door. I can get pictures at lunch. On Tue, Jul 28, 2020, 10:19 AM Edd Schillay via CnC-List < cnc-list@cnc-list.com> wrote: > To Any Listers with a C&C 37+, XL or R with an Electric Windlass Installed, > > There

Stus-List C&C 37+ (or XL or R) Windlass Install

To Any Listers with a C&C 37+, XL or R with an Electric Windlass Installed, There appears to be a gravitational anomaly occurring in this part of the planet where my anchor and chain seem to get heavier and heavier as each year passes, so I’m now in the market for an electric windlass. I’ve se

Re: Stus-List C&C 37 vs Hurricane Dorian

nC-List Sent: Thursday, July 09, 2020 1:33 PM To: CnClist Cc: Dennis C. Subject: Re: Stus-List C&C 37 vs Hurricane Dorian Great story. Thanks for sharing. Remind me to never, ever go sailing with you. :) LOL Dennis C. Touche' 35-1 #83 Mandeville, LA __

Re: Stus-List C&C 37 vs Hurricane Dorian

: Thursday, July 09, 2020 1:33 PM To: CnClist Cc: Dennis C. Subject: Re: Stus-List C&C 37 vs Hurricane Dorian Great story. Thanks for sharing. Remind me to never, ever go sailing with you. :) LOL Dennis C. Touche' 35-1 #83 Mande

Re: Stus-List C&C 37 vs Hurricane Dorian

Great story with a good ending. Another reason to keep “Ronin” in a shed sans keel and mast. ;-) Also. Nice boat… Regards, Dave Godwin 1982 C&C 37 - Ronin Reedville - Chesapeake Bay Ronin’s Overdue Refit > On Jul 9, 2020, at 1:42 PM, NORTHERN LIGHT via CnC-L

Re: Stus-List C&C 37 vs Hurricane Dorian

@ Dennis, LOL, that was just one crazy summer…we had many years of trouble-free, happy cruising all over. Chris NL > On Jul 9, 2020, at 13:32, Dennis C. via CnC-List > wrote: > > Great story. Thanks for sharing. > > Remind me to never, ever go sailing with you. :) LOL > > Dennis C. > Tou

Re: Stus-List C&C 37 vs Hurricane Dorian

Great story. Thanks for sharing. Remind me to never, ever go sailing with you. :) LOL Dennis C. Touche' 35-1 #83 Mandeville, LA ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If yo

Re: Stus-List C&C 37 vs Hurricane Dorian

Nice video. Those 37s are good looking boats. From: CnC-List On Behalf Of NORTHERN LIGHT via CnC-List Sent: Thursday, July 9, 2020 10:45 AM To: cnc-list@cnc-list.com Cc: NORTHERN LIGHT Subject: Stus-List C&C 37 vs Hurricane Dorian

Re: Stus-List C&C 37 vs Hurricane Dorian

Great Story! Bill Coleman From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of NORTHERN LIGHT via CnC-List Sent: Thursday, July 09, 2020 11:45 AM To: cnc-list@cnc-list.com Cc: NORTHERN LIGHT Subject: Stus-List C&C 37 vs Hurricane Dorian Hey guys, sorry for

Stus-List C&C 37 vs Hurricane Dorian

Hey guys, sorry for the dramatic title, it was not meant to look like clickbait on a YT channel :) But here’s a little story for the C&C community: I spent the last 4 years prepping my boat, Northern Light for a passage to Europe and the Med, and finally last summer I left from Nova Scotia, d

Re: Stus-List C&C 37+ Bow Chocks

Rob, Welcome to the list! Correct me if I’m wrong, but I think the issue you are facing is on the starboard side, where the chock is very close to the anchor roller assembly and it’s a bit of a pain getting mooring ines in and out of the tight space. Suggest trying a thick cut-to-size plastic

Re: Stus-List C&C 37+ Bow Chocks

I had the same problem with my 34/36. Garhauer made me a beautiful set of bow chocks. I cut off the toe rail near the bow, and the bolts they put on the bottom of the chocks were matched to the existing holes. The only thing I recommend to make the job easy is to account for the angles inside

Stus-List C&C 37+ Bow Chocks

Hi I’m new owner of Sapphire (formally Kaylarah capt. Gary, and it’s a great boat) Does anyone have experience replacing the bow chocks on a 37/40, the current setup does not allow for easy on / off of mooring ride. Thanks Rob Sent from my iPhone ___

Stus-List C&C 37+ Bimini Enclosure (side awning)

Wondering if anyone has any good pictures of enclosure windows added to biminis on 37+ or similar boats? The real concern that I have is trying to somehow adapt these to accommodate the traveler (and main sheet) that would disrupt a normal full enclosure from being effective while sailing. We hav

Re: Stus-List C&C 37+ -- Head Vented Loop?

I believe that’s still correct. At least I hope so. From: CnC-List On Behalf Of bwhitmore via CnC-List Sent: Saturday, February 15, 2020 8:36 AM To: cnc-list@cnc-list.com Cc: bwhitmore ; Chuck Saur Subject: Re: Stus-List C&C 37+ -- Head Vented Loop? In the U.S, at least, boats can

Re: Stus-List C&C 37+ -- Head Vented Loop?

. Thank you. From: CnC-List on behalf of Ken Heaton via CnC-List Sent: Saturday, February 15, 2020 5:02:17 AM To: cnc-list Cc: Ken Heaton Subject: Re: Stus-List C&C 37+ -- Head Vented Loop? 'The wife is pretty astute about closing the sink drain sea co

Re: Stus-List C&C 37+ -- Head Vented Loop?

Subject: Stus-List C&C 37+ -- Head Vented Loop? Edd...I had to disconnect and take the Y-valve out.  As I understand it, you cannot have overboard discharge in the great lakes.  Perhaps the PO of my boat did some earlier surgery...Chuck Saur

Re: Stus-List C&C 37+ -- Head Vented Loop?

'The wife is pretty astute about closing the sink drain sea cock before getting underway for the day which prevents the backup all together.' This is pretty much operating procedure on our 37XL as well Ken H. On Sat, 15 Feb 2020 at 00:47, Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote:

Re: Stus-List C&C 37+ -- Head Vented Loop?

I installed a check valve in the sink drain. Not a duck style but rather a flap style. It works pretty well but over time water can still eventually get by. The wife is pretty astute about closing the sink drain sea cock before getting underway for the day which prevents the backup all together.

Re: Stus-List C&C 37+ -- Head Vented Loop?

An automatic valve activated by a pendulum?  :-) Graham Collins Secret Plans C&C 35-III #11 On 2020-02-14 10:21 p.m., Gary Russell via CnC-List wrote: Hi Graham,      Actually that is what I did as well.  I was hoping for a more elegant/automatic solution. Thank, Gary S/V Kaylarah '90 C&C 37+

Stus-List C&C 37+ -- Head Vented Loop?

My 37+ has a vented loop behind the vanity. I converted the port side water tank to holding for the Great Lakes. I installed a check valve in the aft sink but shut off the v birth sink when sailing using a 1/4 turn valve in the drain. It’s pretty easy to bury the rail in a blow. I try to reduce

Stus-List C&C 37+ -- Head Vented Loop?

Edd...I had to disconnect and take the Y-valve out. As I understand it, you cannot have overboard discharge in the great lakes. Perhaps the PO of my boat did some earlier surgery... *Chuck Saur* 517 490-5926 Cell ___ Thanks everyone for supporting t

Re: Stus-List C&C 37+ -- Head Vented Loop?

Hi Edd, That might work, but many check valves have a spring in them, and I'm not sure a drain will have enough head pressure to open it when intentionally draining the sink. Gary ~~~_/)~~ On Fri, Feb 14, 2020 at 9:22 PM Edd Schillay via CnC-List < cnc-list@cnc-list.com> wrote: >

Re: Stus-List C&C 37+ -- Head Vented Loop?

Gary, Maybe a check valve? All the best, Edd ———- Edd M. Schillay Captain of the “Starship Enterprise” C&C 37+ | Sail No.: NCC-1701-B Venice Yacht Club | Venice Island, FL www.StarshipSailing.com ———- 914.774.9767 | Mobile ———- Sent via iPhone 11 Pro iPho

Re: Stus-List C&C 37+ -- Head Vented Loop?

Hi Graham, Actually that is what I did as well. I was hoping for a more elegant/automatic solution. Thank, Gary S/V Kaylarah '90 C&C 37+ East Greenwich, RI, USA ~~~_/)~~ On Fri, Feb 14, 2020 at 9:18 PM Graham Collins via CnC-List < cnc-list@cnc-list.com> wrote: > Hi Gary > > The s

Re: Stus-List C&C 37+ -- Head Vented Loop?

Hi Gary The sink in the 35-3 is like that as well, I put a valve in the drain line just below the sink - have to open the cupboard to get at it, no big deal.  We don't use the sink in there much though, just at anchor usually. Graham Collins Secret Plans C&C 35-III #11 On 2020-02-14 9:56 p.

Re: Stus-List C&C 37+ -- Head Vented Loop?

My problem is the sink drain. You can't put a vented loop in a sink drain, but when the boat is healed over, the sink is below the water line and overflows. Any solutions? Gary S/V Kaylarah '90 C&C 37+ East Greenwich, RI, USA ~~_/)~'90 C&C 37+~ On Fri, Feb 14, 2020 at 5:17 PM Chuck S

Re: Stus-List C&C 37+ -- Head Vented Loop?

The loop leads to the seacock out of the hull, not the tank.Just FYI,Bruce Sent from my Verizon, Samsung Galaxy smartphone Original message From: Chuck Saur via CnC-List Date: 2/14/20 5:17 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Chuck Saur Subject: Stus-List C&

Re: Stus-List C&C 37+ -- Head Vented Loop?

Chuck, Thanks. I’m not as worried about the waste side as the Y-Valve is pretty high. The raw water intake is a concern when heeled, so I’m wondering if I should add hose and a loop between the “walls” of the head cabinets. All the best, Edd ———- Edd M. Schillay Captain of the “

Stus-List C&C 37+ -- Head Vented Loop?

Hello Edd...no vented loop on my 1990 37+. I checked and can see the waste hose enter the holding tank at the top of the tank. Have not had issues...yet! If you choose to do that, let me know how you fit in into the space there! I did change out the entire pump assembly on a head rebuild last y

Re: Stus-List C&C 37+ -- Head Vented Loop?

> > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Gary > Russell via CnC-List > *Sent:* Thursday, February 13, 2020 8:55 PM > *To:* C&C List > *Cc:* Gary Russell > *Subject:* Re: Stus-List C&C 37+ -- Head Vented Loop? &

Re: Stus-List C&C 37+ -- Head Vented Loop?

ick Brass > > Washington, NC > > > > > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Gary > Russell via CnC-List > *Sent:* Thursday, February 13, 2020 8:55 PM > *To:* C&C List > *Cc:* Gary Russell > *Subject:* Re: St

Re: Stus-List C&C 37+ -- Head Vented Loop?

To: C&C List Cc: Gary Russell Subject: Re: Stus-List C&C 37+ -- Head Vented Loop? Hi Edd, Even if you have a vented loop behind the wall, the top of the vented loop is below the deck and can go below the waterline when the water reaches the gunwale. Ask me how I know. G

Re: Stus-List C&C 37+ -- Head Vented Loop?

Hi Edd, Even if you have a vented loop behind the wall, the top of the vented loop is below the deck and can go below the waterline when the water reaches the gunwale. Ask me how I know. Gary S/V Kaylarah '90 C&C 37+ East Greenwich, RI, USA ~~~_/)~~ On Thu, Feb 13, 2020 at 3:36 PM

Re: Stus-List C&C 37+ -- Head Vented Loop?

Verizon, Samsung Galaxy smartphone Original message From: Edd Schillay via CnC-List Date: 2/13/20 2:36 PM (GMT-06:00) To: Edd Schillay via CnC-List Cc: Edd Schillay Subject: Stus-List C&C 37+ -- Head Vented Loop? Listers,I’m installing a new head into the Enterprise next

Stus-List C&C 37+ -- Head Vented Loop?

Listers, I’m installing a new head into the Enterprise next week. Without my x-ray vision, I can’t really see what’s going on behind the wall there. Does anyone know if the boat came standard with a vented loop installed? While the head will sit just above the waterline, I know it does go under

Re: Stus-List C&C 37 For Sale

Bummer, I am a bit partial as I have exact same boat in 1982 model From experience of 2 years ownership and little PHRF racing this season (she won everything we entered) I can confidently state she is comfortable, fast, and sails like a dream, she’s a great boat for sure!! Wish you luck with

Stus-List C&C 37 For Sale

Hi Folks It’s time to close another chapter in my life. After much thought and tears I (we) have decided it’s time to part with Persuasion. For more information please visit www.persuasion37.ca Regards Mike ___ Thanks everyone for supporting this

Re: Stus-List C&C 37+ / Starboard Tack / Head

: 11/30/19 9:58 AM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Edd Schillay Subject: Stus-List C&C 37+ / Starboard Tack / Head Listers,While it has been happening since Day One, yesterday, during our first Black Friday Sail in the beautiful Gulf (suck it, northerners), I could see water co

Re: Stus-List C&C 37+ / Starboard Tack / Head

Edd Do you have a vented loop above the waterline when heeled? Joel On Sat, Nov 30, 2019 at 9:59 AM Edd Schillay via CnC-List < cnc-list@cnc-list.com> wrote: > Listers, > > While it has been happening since Day One, yesterday, during our first > Black Friday Sail in the beautiful Gulf (suck it,

Re: Stus-List C&C 37+ / Starboard Tack / Head

"Has anyone come up with a simple solution for this?" Is anyone else tempted to say Suck it Edd!? ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use Pa

Re: Stus-List C&C 37+ / Starboard Tack / Head

Ours doesn't do that so I suspect your pump assembly is due for a rebuild or replacement. If it it a Jabsco manual toilet, you can replace the entire pump assembly ( Jabsco Part No. 29040-3000 Pump Assembly ) for little more that the cost of the parts ( 29045-3000 Major Service Kit ), and everythi

Re: Stus-List C&C 37+ / Starboard Tack / Head

-List Sent: Saturday, November 30, 2019 9:59 AM To: cnc-list@cnc-list.com Cc: Edd Schillay Subject: Stus-List C&C 37+ / Starboard Tack / Head Listers, While it has been happening since Day One, yesterday, during our first Black Friday Sail in the beautiful Gulf (suck it, northerners), I could

Stus-List C&C 37+ / Starboard Tack / Head

Listers, While it has been happening since Day One, yesterday, during our first Black Friday Sail in the beautiful Gulf (suck it, northerners), I could see water coming in to the head from the rim while heeled on Starboard tack. The water will fill the tank and overflow. Has anyone come up wi

Re: Stus-List C&C 37+ Backstay Inspection/Improvements

t; I took a look at Ogopogo, the 37+/4- in Fairhope,online. Since this > string started with questions about the back stay on these boats, I was > wondering about the set up on the one you're looking at. They seems to > have been relocate inboard from their original location on the

Re: Stus-List C&C 37+ Backstay Inspection/Improvements

#x27;re looking at. They seems to have been >>> relocate inboard from their original location on the transom. I'm curious >>> as to why this was done. Any idea or explanation given? >>> >>> GL with the purchase...I am a huge fan of the 37+/40! >>

Re: Stus-List C&C 37 with spartite

It was a while ago, but I put spartite in on my 35-2 with mast straps in place. The mast has come out a number of times, so it clearly worked. To the best of my recollection, I coated the straps and the inside of the mast collar carefully with vaseline. After reinstalling the straps I filled th

Re: Stus-List C&C 37 with spartite

CnC-List To: cnc-list Cc: pete.shelquist Sent: Tue, Sep 17, 2019 3:15 pm Subject: Stus-List C&C 37 with spartite <!-- #yiv4546863288 _filtered #yiv4546863288 {font-family:"Cambria Math";panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv4546863288 {font-family:Calibri;panose-1

Re: Stus-List C&C 37 with spartite

Ditto here. I rigged the same type of rod/turnbuckle to Honey's mast, added the SpareTite and have never looked back. As long as you follow the instructions the next mast removal is simple and straightforward Best regards, Jack Fitzgerald HONEY - US12788 Savannah, GA USA This email is protected b

Re: Stus-List C&C 37 with spartite

I did that on my 39, and I removed those annoying straps. I put A Rod going from the top center of the mask collar, with a flathead on the top end of the rod, sealed in butyl. On the bottom I had a turnbuckle, and I drilled and tapped into a keel bolt and put 3/8 in threads into the keelbolt for th

Stus-List C&C 37 with spartite

I have a 1984 37’ and am considering using spartite. Has anyone done this on the this model? How did you accommodate the tie down straps? Thanks, ___ Thanks everyone for supporting this list with your contributions. Each and every one is great

Re: Stus-List C&C 37/40

-list@cnc-list.com Cc: paul.h...@rogers.com Subject: Stus-List C&C 37/40 Can someone tell me the major differences in the 37/40 and the "R" version, and are there other versions of the same boat. By the way, apparently Beau Geste is in Toronto getting fixed by the owner himself.

Re: Stus-List C&C 37/40

Paul, There are three versions — The Plus, the XL and the R. The stern and the interior of the R is very different. https://sailboatdata.com/sailboat/cc-3740-r https://sailboatdata.com/sailboat/cc-3740

Re: Stus-List C&C 37/40

Well, he’s got his work cut out for himself… — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI > On Jul 23, 2019, at 1:37 PM, Paul via CnC-List wrote: > > By the way, apparently Beau Geste is in Toronto getting fixed by the owner > himself. _

Stus-List C&C 37/40

Can someone tell me the major differences in the 37/40 and the "R" version, and are there other versions of the same boat. By the way, apparently Beau Geste is in Toronto getting fixed by the owner himself. Thanks, Paul Hood ___ Thanks everyone for

Stus-List C&C 37/40 1990

Let us hope the buyers knew what they were getting into! Joe Coquina Subject: [EXTERNAL] Re: Stus-List C&C 37/40 1990 Beau Geste appears to have been sold. We may see some traffic here from the new owners. Cheers Brent 27-5 Lake Winnipeg. Sent from my iP

Re: Stus-List C&C 37/40 1990

Hi Lee, Creola was for sale when I was looking for my boat, four years ago. There’s probably a reason she’s been on the market for so long. As others have mentioned, a good survey is your best bet. Even if you have to walk away, it’s well worth it. Al Liles SV Elendil, C&C 37/40+ Vancouver, BC

Re: Stus-List C&C 37/40 1990

Lee, I have a 1990 C&C 37/40+ and could not be happier with the boat. I purchased it in 2005 and it is in great shape (and I have a glowing survey from this past April to prove it!). The postings on Sailing Anarchy and other sites are from one particular owner who was/is on this list. He had

Re: Stus-List C&C 37/40 1990

Creola / FLA / R model On Tuesday, July 23, 2019, 08:21:14 AM MDT, Frederick G Street via CnC-List wrote: I hope the original poster isn’t referring to Beau Geste, located in Bayfield, WI; a vessel discussed on the list earlier.  If so, run away.  Don’t even think twice. — Fred Fred

Re: Stus-List C&C 37/40 1990

Beau Geste appears to have been sold. We may see some traffic here from the new owners. Cheers Brent 27-5 Lake Winnipeg. Sent from my iPhone > On Jul 23, 2019, at 8:20 AM, Frederick G Street via CnC-List > wrote: > > I hope the original poster isn’t referring to Beau Geste, located in

Re: Stus-List C&C 37/40 1990

I hope the original poster isn’t referring to Beau Geste, located in Bayfield, WI; a vessel discussed on the list earlier. If so, run away. Don’t even think twice. — Fred Fred Street -- Minneapolis S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI > On Jul 23, 2019, at 9:09 AM, Ken Heaton v

Re: Stus-List C&C 37/40 1990

" the boat may bend and then bind the steering " That's funny, no, that doesn't happen. " balsa core and water on an older boat." Get a good survey. C&C's generally don't have this problem but once in a while they do, usually due to a later owner modification done badly. Which 1990 C&C 37/40 a

Stus-List C&C 37/40 1990

Hi - looking at buying the above boat.  Internet blogs (Anarchy/others) indicate the boat may bend and then bind the steering.  Second concern is the balsa core and water on an older boat. This may be a std concern for all older boats.  Any take-aways would be appreciated.  Boat has been raced a

Stus-List C&C 37+ holding tank

Daryl, Yes it is absolutely possible. HMP had a couple plastic tanks in stock when I did mine maybe 5 years ago. I won't bore everyone with the details here but the hardest part was cutting the 3 inch tabbing an arms length up. It's built like a bomb shelter. If you don't use chlorine products

Re: Stus-List C&C 37+ Polars

This topic is about 2 years old. I finally got a chance to play with the polars for the 37+. I use an Android app called SailGrib WR. It downloads grib files and then performs routing based on expected wind and boat performance. It requires the boat's polar data to be provided in order to be accur

Re: Stus-List C&C 37 Keel bolt size

am Subject: Re: Stus-List C&C 37 Keel bolt size Richard On Persuasion the one under the mast is considerably bigger. Mike PERSUASION C&C 37 K/CB Long Sault On Jun 27, 2018, at 10:31 PM, bushmark4--- via CnC-List wrote: Josh; thanks the video was very helpful; it appear that al

Re: Stus-List C&C 37 Keel bolt size

> To: C&C List > Cc: Josh Muckley > Sent: Wed, Jun 27, 2018 5:43 pm > Subject: Re: Stus-List C&C 37 Keel bolt size > > Torque values are typically based on the size of the threaded portion of the > bolt not the nut size or socket size. It was a little unclear y your &

Re: Stus-List C&C 37 Keel bolt size

Message- From: Josh Muckley via CnC-List To: C&C List Cc: Josh Muckley Sent: Wed, Jun 27, 2018 5:43 pm Subject: Re: Stus-List C&C 37 Keel bolt size Torque values are typically based on the size of the threaded portion of the bolt not the nut size or socket size. It was a little unclea

Re: Stus-List C&C 37 Keel bolt size

Torque values are typically based on the size of the threaded portion of the bolt not the nut size or socket size. It was a little unclear y your description which you were measuring. Have you seen my video? I provided extra info in the video description. I'll link it here and copy the descript

Re: Stus-List C&C 37 Keel bolt size

Richard, No one has gotten back to you on this so I thought I would chime in. The measurement that you provided is on the low end of a 1 1/8 hex (the min listed is 1.088 across flats).  You should be OK with a 1 1/8 socket.  The torque should be based on fastener strength.  I made the chart o

Re: Stus-List C&C 37 Keel bolt size

Help! I am working on the torque for my keel bolts; (1985 37 CB); I am having difficulty in two areas; No 1. finding a deep well socket for tightening the keel bolts; my problem seems to be the size of the bolt; (or more likely, my poor measuring); I measure the bolts at 1 3/32; no one carries

Stus-List C&C 37/40+

Obsession is for sale: http://www.sailboatlistings.com/view/71933 She is a fresh water vessel located on Lake Lanier and is in immaculate/turnkey condition. Complete list of all updates available. All serious offers considered. David & Joanne Mocny (770) 402-4595 Sent from Mail for Windows 10

Re: Stus-List C&C 37+ Sails for Sale

The spinnakers are symmetrical. - Ron From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Russell via CnC-List Sent: Sunday, April 22, 2018 8:05 PM To: C&C List Cc: Gary Russell Subject: Re: Stus-List C&C 37+ Sails for Sale Ron, Are the spinnakers symet

Re: Stus-List C&C 37+ Sails for Sale

Ron, Are the spinnakers symetrical or asym? Gary S/V Kaylarah ~~~_/)~~ On Sun, Apr 22, 2018 at 10:12 AM, Ron Ricci via CnC-List < cnc-list@cnc-list.com> wrote: > I have four genoas, two spinnakers (3/4 & 1.5 oz.) and a mainsail > (Mylar-Kevlar) that I don’t need. Some are in almos

Stus-List C&C 37+ Sails for Sale

I have four genoas, two spinnakers (3/4 & 1.5 oz.) and a mainsail (Mylar-Kevlar) that I don’t need. Some are in almost perfect condition and the others are in very good to excellent condition. Check out the link: https://1drv.ms/f/s!AhpB-lul9d5YgwwnK_wNiF3vMoCA which includes a spreadsheet w

Re: Stus-List C&C 37+ and XL and 37R Build Files

4; 1985 C&C 27 CB; Ohio River, (which is above flood stage) >>> >>> Richard N. Bush >>> 2950 Breckenridge Lane, Suite Nine >>> Louisville, Kentucky 40220-1462 >>> 502-584-7255 <(502)%20584-7255> >>> >>> >>> -Original

Re: Stus-List C&C 37+ and XL and 37R Build Files

2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 <(502)%20584-7255> -Original Message- From: Ken Heaton via CnC-List To: cnc-list Cc: Ken Heaton Sent: Sat, Feb 24, 2018 6:49 am Subject: Re: Stus-List C&C 37+ and XL and 37R Factory Invoices and

Re: Stus-List C&C 37+ and XL and 37R Factory Invoices and Pricing (1988 & 1989)

p;C 27 CB; Ohio River, (which is above flood stage) Richard N. Bush 2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 -Original Message- From: Ken Heaton via CnC-List To: cnc-list Cc: Ken Heaton Sent: Sat, Feb 24, 2018 6:49 am Subject: Re: Stus-Li

Re: Stus-List C&C 37+ and XL and 37R Build Files

02)%20584-7255> > > > -Original Message- > From: Ken Heaton via CnC-List > To: cnc-list > Cc: Ken Heaton > Sent: Sat, Feb 24, 2018 6:49 am > Subject: Re: Stus-List C&C 37+ and XL and 37R Factory Invoices and Pricing > (1988 & 1989) > > Hi Mar

Re: Stus-List C&C 37+ and XL and 37R Build Files

5 C&C 27 CB; Ohio River, (which is above flood stage) Richard N. Bush 2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 -Original Message- From: Ken Heaton via CnC-List To: cnc-list Cc: Ken Heaton Sent: Sat, Feb 24, 2018 6:49 am Subject: Re: Stus

  1   2   3   4   5   >